1Department of Chemistry, Faculty of Science and Technology, Universitas Islam Negeri Maulana Malik Ibrahim, Malang, Indonesia
2Research Center for Polymer Technology, Research Organization for Nanotechnology and Materials, National Research and Innovation Agency (BRIN), Tangerang Selatan, Indonesia
BibTex Citation Data :
@article{JKSA87216, author = {Siska Ela Kartika and Dhina Adila Rahmasari and Anis Nuraini and Najmatun Nayyar Alhumaira and Naila Mas’adatus Syarifah and Sonita Afrita Purba Siboro and Roni Sujarwadi}, title = {Synthesis of Reusable Cd(II)-Imprinted Polymers: Impact of Extractant Agents on Selective Cavity Formation and Cadmium Adsorption Performance}, journal = {Jurnal Kimia Sains dan Aplikasi}, volume = {29}, number = {9}, year = {2026}, keywords = {adsorption; Cd(II)-imprinted polymers; extractant agents; cadmium contamination; regeneration}, abstract = { Cadmium (Cd) heavy metal pollution from industrial activities poses a serious threat to aquatic ecosystems and human health. This study focuses on creating Cd(II)-imprinted polymers (Cd(II)-IPs) as selective adsorbents for Cd(II) ions and assessing the ability of extractant agents to form specific cavities within the polymer structure. The adsorbent’s ability to regenerate was also analyzed to support the development of eco-friendly adsorbents. Cd(II)-IPs were made using 8-hydroxyquinoline, methacrylic acid, ethylene glycol dimethacrylate, and azobisisobutyronitrile. The Cd(II) ions were extracted from the polymer matrix with HNO 3 , HCl, and H 2 SO 4 . The results showed that HNO 3 was the most effective extractant for releasing Cd(II) ions from the polymer, yielding a selective Cd(II) adsorbent with an adsorption capacity of 63.46 mg/g. X-ray diffraction analysis confirmed the successful removal of Cd(II) ions, as indicated by the disappearance of the characteristic peak of Cd(NO 3 ) 2 ·4H 2 O after extraction with HNO 3 . Brunauer–Emmett–Teller (BET) analysis showed that Cd(II)-IPs had a larger surface area, pore volume, and pore diameter compared to non-imprinted polymers (NIPs) as a control. Cd(II)-IPs could retain adsorption activity and competitive performance after repeated regeneration, with a regeneration ability of up to five adsorption-desorption cycles and a recovery efficiency of 21.2%. Cd(II)-IPs have the potential to be applied in selective and sustainable industrial wastewater treatment. }, issn = {2597-9914}, pages = {641--647} doi = {10.14710/jksa.29.9.641-647}, url = {https://ejournal.undip.ac.id/index.php/ksa/article/view/87216} }
Refworks Citation Data :
Cadmium (Cd) heavy metal pollution from industrial activities poses a serious threat to aquatic ecosystems and human health. This study focuses on creating Cd(II)-imprinted polymers (Cd(II)-IPs) as selective adsorbents for Cd(II) ions and assessing the ability of extractant agents to form specific cavities within the polymer structure. The adsorbent’s ability to regenerate was also analyzed to support the development of eco-friendly adsorbents. Cd(II)-IPs were made using 8-hydroxyquinoline, methacrylic acid, ethylene glycol dimethacrylate, and azobisisobutyronitrile. The Cd(II) ions were extracted from the polymer matrix with HNO3, HCl, and H2SO4. The results showed that HNO3 was the most effective extractant for releasing Cd(II) ions from the polymer, yielding a selective Cd(II) adsorbent with an adsorption capacity of 63.46 mg/g. X-ray diffraction analysis confirmed the successful removal of Cd(II) ions, as indicated by the disappearance of the characteristic peak of Cd(NO3)2·4H2O after extraction with HNO3. Brunauer–Emmett–Teller (BET) analysis showed that Cd(II)-IPs had a larger surface area, pore volume, and pore diameter compared to non-imprinted polymers (NIPs) as a control. Cd(II)-IPs could retain adsorption activity and competitive performance after repeated regeneration, with a regeneration ability of up to five adsorption-desorption cycles and a recovery efficiency of 21.2%. Cd(II)-IPs have the potential to be applied in selective and sustainable industrial wastewater treatment.
Article Metrics:
Last update:
Last update: 2026-11-05 16:42:30
As an article writer, the author has the right to use their article for various purposes, including use by institutions that employ the author or institutions that provide funding for the research. These author rights are granted without special permission.
Authors who publish a paper in JKSA have broad rights to use their work for teaching and scientific purposes without the need to request permission, including: (i) teaching in the author's class or institution; (ii) presenting the work at meetings or conferences and distributing copies to participants; (iii) using the work in training conducted by the author or the author's institution; (iv) distributing copies to colleagues for research purposes; (v) using the work in the compilation of subsequent works by the author; (vi) including the work in a thesis or dissertation; (vii) reusing part of the article in another work, with appropriate citation; (viii) preparing derivative works, with appropriate citation; and (ix) voluntarily posting the work on open websites operated by the author or the author's institution for scientific purposes, in accordance with the CC BY-SA License.
Authors and readers may copy and redistribute the material in any medium or format, and may remix, transform, and build upon the material for any purpose, provided that they give appropriate credit by citing the article or its content, provide a link to the license, and indicate if changes were made.
The authors submitting a manuscript do so on the understanding that, if accepted for publication, the copyright of the article shall be assigned to Jurnal Kimia Sains dan Aplikasi (JKSA). Copyright encompasses the rights to reproduce and distribute the article in all forms and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Reproducing any part of this journal, storing it in a database, or transmitting it in any form or medium is permitted without written permission from JKSA. However, the original source must be properly cited in accordance with academic conventions.
JKSA, the Chemistry Department of Diponegoro University, and the Editor make every effort to ensure that no inaccurate, false, or misleading data, opinions, or statements are published in JKSA. However, the content of each article is the sole and exclusive responsibility of its authors.
The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form - Indonesian] [Copyright Transfer Form - English]. The copyright form should bear the authors' original signatures and be sent to the Editor as a printed document, a scanned document sent via email, or by fax.
Prof. Adi Darmawan, Ph.D (Editor in Chief)
Editor in chief of Jurnal Kimia Sains dan Aplikasi (JKSA)
Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University
Visitor: View My Stats
Jurnal Kimia Sains dan Aplikasi is indexed in:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.