BibTex Citation Data :
@article{Presipitasi85816, author = {Badrus Zaman and Nurandani Hardyanti and Wiharyanto Oktiawan and Budi Samadikun and Purwono Purwono}, title = {Biodrying Performance and Greenhouse Gas Emissions through Hot Air Aeration in Solid Waste Conversion}, journal = {Jurnal Presipitasi: Media Komunikasi dan Pengembangan Teknik Lingkungan}, volume = {0}, number = {0}, year = {2026}, keywords = {Biodrying; CO2 emissions; greenhouse gases; hot air aeration; N2O emissions; solid waste}, abstract = { Biodrying can convert solid waste into Refuse Derived Fuel (RDF) as an alternative to fossil fuels. The conversion of solid waste to RDF with a moisture content of 10-30% generally takes 21 days. This study aims to analyze greenhouse gas emissions and biodrying performance by applying hot air aeration to accelerate solid waste conversion into RDF. Laboratory-scale investigation used a bio-drying reactor and a solid waste mixture. Hot air was produced by burning wood charcoal (X1) and mixture of wood charcoal and sawdust (X2). The research showed that hot air aeration systems are more efficient and effective at converting solid waste into RDF. Water content of solid waste reduce from 50% to 34.29% after 60 minutes at 47-80oC. N2O emissions were lower when the hot air source came from burning X1. CO2 emissions were lower when the hot air source came from burning X2. The amount of electrical power required to burn one kg of X1 and X2 is 0.0135 and 0.018 kWh, respectively. }, issn = {2550-0023}, doi = {10.14710/presipitasi.v0i0.%p}, url = {https://ejournal.undip.ac.id/index.php/presipitasi/article/view/85816} }
Refworks Citation Data :
Biodrying can convert solid waste into Refuse Derived Fuel (RDF) as an alternative to fossil fuels. The conversion of solid waste to RDF with a moisture content of 10-30% generally takes 21 days. This study aims to analyze greenhouse gas emissions and biodrying performance by applying hot air aeration to accelerate solid waste conversion into RDF. Laboratory-scale investigation used a bio-drying reactor and a solid waste mixture. Hot air was produced by burning wood charcoal (X1) and mixture of wood charcoal and sawdust (X2). The research showed that hot air aeration systems are more efficient and effective at converting solid waste into RDF. Water content of solid waste reduce from 50% to 34.29% after 60 minutes at 47-80oC. N2O emissions were lower when the hot air source came from burning X1. CO2 emissions were lower when the hot air source came from burning X2. The amount of electrical power required to burn one kg of X1 and X2 is 0.0135 and 0.018 kWh, respectively.
Article Metrics:
Last update:
Last update: 2026-06-24 20:44:01
Copyright includes the exclusive right to publish and provide articles in all forms and media, including reprints, photographs, microfilms, and the like, as well as translations. The publication of every part of this journal, storage in databases, and distribution such as electronic, electrostatic, and mechanical copies, photocopies, records, magnetic media, etc., will be permitted only with written permission from Jurnal Presipitasi, Diponegoro University. Jurnal Presipitasi, Diponegoro University, and the editors and Editorial of the International Advisory Board make every effort to ensure that no false or misleading data, opinions, or statements are published in the journal. The contents of articles published in Jurnal Presipitasi, Diponegoro University, are the sole and exclusive responsibility of each author.
View My Stats
Jurnal Presipitasi is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.