Pengaruh Metoda Preparasi Terhadap Aktivitas Katalis Nikel Dengan Penyangga Titania

D Sondari

doi:10.14710/reaktor.6.1.44-47

DOI: https://doi.org/10.14710/reaktor.6.1.44-47

Pengaruh Metoda Preparasi Terhadap Aktivitas Katalis Nikel Dengan Penyangga Titania

*D Sondari - , Indonesia

Received: 13 Jun 2017; Published: 13 Jun 2017.

Citation Format:

Abstract

Preparasi katalis logam aktif nikel dengan bahan penyangga titania dapat dilakukan menggunakan metode impregnasi, sol-gel dan ko-presipitasi dengan kandungan logamaktif 20; 22,5 dan 25% berat. Dari hasil uji aktivitas katalis menggunakan reaktor skala 20 ml menunjukkan bahwa metode sol-gel memberikan aktivitas yang paling maksimal dengan terjadinya penurunan bilangan iodium dari 60,98 menjadi 41,31 dan luas permukaan spesifik maksimal 18,65 gr/m²pada konsentrasi 22,5%. Dari analisa pola difraksi sinar-X pada metoda sol-gel, tampak adanya oksida logam nikel pada 2Ө = 43,27 yang intensitasnya paling rendah disbanding dua metoda lain, impregnasi dank ko-presipitasi. Puncak logam nikel teridentifikasi pada 2Ө = 44,50 menunjukkan adanya logam aktif nikel Ni (100) walaupun intensitasnya masih rendah, telah menyebabkan luas permukaan spesifik katalis pada metoda sol-gel lebih besar daripada metoda impregnasi dank o-presipitasi.

Kata kunci : katalis, penyangga, impregnasi, sol-gel, ko-presipitasi, metoda, altivitas

Fulltext View|Download

Keywords: katalis, penyangga, impregnasi, sol-gel, ko-presipitasi, metoda, altivitas

Article Metrics:

Article Info

Section: Research Article

Language : INDONESIA

In Volume 6 No. 1 Juni 2002

Recent articles

Pemodelan Dan Studi Eksperimental Laju Alir Fluida Pada Fluidisasi Minimum Study Of Solid Planar Source For Phosphorus Diffution Process On Semiconductor Devices Fabrication Studi Awal Pembuatan Asam Oksalat Dari Saut Kelapa Dengan Metoda Oksidasi More recent articles

Most cited articles

PADDY DRYING IN MIXED ADSORPTION DRYER WITH ZEOLITE: DRYING RATE AND TIME ESTIMATION Synthesized of Double Layer Thin Film ZnO/ZnO:Ag by Sol-Gel Method for Direct Blue 71 Photodegradation AKTIVASI ZEOLIT ALAM SEBAGAI ADSORBEN PADA ALAT PENGERING BERSUHU RENDAH DEALUMINATION AND CHARACTERIZATION OF ZSM - 5 AS CATALYST FOR GLYCEROL CONVERSION TO GLYCEROL MONOLAURATE EKSTRAKSI OLEORESIN DARI KAYU MANIS BERBANTU ULTRASONIK DENGAN MENGGUNAKAN PELARUT ALKOHOL More cited articles

Last update:

Modified Hybrid Catalyst of Fe₃O₄/Cellulose Nanocomposite-Base and their Potential Application as Dye Waste Adsorbent
Winna Aurellia, Sunaryono Sunaryono, Nasikhudin Nasikhudin, Nandang Mufti, Ahmad Taufiq, Aripriharta Aripriharta, Nadya Eka. Key Engineering Materials, 951 , 2023. doi: 10.4028/p-z6jQHa

Last update: 2025-02-06 06:12:13

No citation recorded.

In order for REAKTOR to publish and disseminate research articles, we need non-exclusive publishing rights (transferred from the author(s) to the publisher). This is determined by a publishing agreement between the Author(s) and REAKTOR. This agreement deals with transferring or licensing the publishing copyright to REAKTOR while Authors still retain significant rights to use and share their published articles. REAKTOR supports the need for authors to share, disseminate, and maximize the impact of their research and these rights in any databases.

As a journal author, you have the right to use your article for many purposes, including by your employing institute or company. These Author rights can be exercised without the need to obtain specific permission. Authors publishing in BCREC journals have wide rights to use their works for teaching and scholarly purposes without needing to seek permission, including, but not limited to:

use for classroom teaching by the Author or the Author's institution and presentation at a meeting or conference and distributing copies to attendees;
use for internal training by the author's company;
distribution to colleagues for their research use;
use in a subsequent compilation of the author's works;
inclusion in a thesis or dissertation;
reuse of portions or extracts from the article in other works (with full acknowledgment of the final article);
preparation of derivative works (other than commercial purposes) (with full acknowledgment of the final article);
voluntary posting on open websites operated by the author or the author’s institution for scholarly purposes,

(but it should follow the open access license of Creative Common CC-by-SA License).

Authors/Readers/Third Parties can copy and redistribute the material in any medium or format and remix, transform, and build upon the material for any purpose, even commercially. Still, they must give appropriate credit (the name of the creator and attribution parties (authors detail information), a copyright notice, an open access license notice, a disclaimer notice, and a link to the material), provide a link to the license, and indicate if changes were made (Publisher indicates the modification of the material (if any).

Authors/Readers/Third Parties can read, print and download, redistribute or republish the article (e.g., display in a repository), translate the article, download for text and data mining purposes, reuse portions or extracts from the article in other works, sell or re-use for commercial purposes, remix, transform, or build upon the material, they must distribute their contributions under the same license as the original Creative Commons Attribution-ShareAlike (CC BY-SA).