MEASUREMENT AND MODELLING OF SORPTION EQUILIBRIUM CURVE OF WATER ON PA6, PP, HDPE AND PVC BY USING FLORY-HUGGINS MODEL

Suherman Suherman; Mirko Peglow; Evangelos Tsotsas

doi:10.14710/reaktor.13.2.89-94

DOI: https://doi.org/10.14710/reaktor.13.2.89-94

MEASUREMENT AND MODELLING OF SORPTION EQUILIBRIUM CURVE OF WATER ON PA6, PP, HDPE AND PVC BY USING FLORY-HUGGINS MODEL

*Suherman Suherman - Jurusan Teknik Kimia Fakultas Teknik, Universitas Diponegoro, Indonesia

Mirko Peglow - Thermal Process Engineering, Otto-von-Guericke-University, Magdeburg, Germany, Germany

Evangelos Tsotsas - Thermal Process Engineering, Otto-von-Guericke-University, Magdeburg, Germany, Germany

Citation Format:

Abstract

The sorption of water on granular polyamide-6 (PA6), granular polypropylene (PP), and powdery high density polyethylene (HDPE) and powdery polyvinyl chloride (PVC) were measured using a gravimetric method in a magnetic suspension balance (MSB). The Flory-Huggins model was successfully applied on the sorption equilibrium curve of all investigated polymers. The influence of temperature is low. The value of Flory-Huggins parameters(c) of PA6, PVC, PP and HDPE were 1.8, 5.8, 6.3, and 8.1, respectively. The water in PA6 is mainly bound moisture, while in PP, HDPE and PVC it is mainly surface moisture.

Fulltext View|Download

Keywords: Flory-Huggins, polymer, sorption

Article Metrics:

Article Info

Section: Research Article

Language : EN

In Volume 13, Nomor 2, Desember 2010

Recent articles

MEASUREMENT AND MODELLING OF SORPTION EQUILIBRIUM CURVE OF WATER ON PA6, PP, HDPE AND PVC BY USING FLORY-HUGGINS MODEL PENGOLAHAN SERBUK LIMBAH BESI MENJADI BESI (III): TINJAUAN KINETIKA MODEL QUASI STEADY STATE EFFECT OF TEMPERATURE AND PARTICLE SIZE ON THE ALKALINE EXTRACTION OF PROTEIN FROM CHICKEN BONE WASTE More recent articles

Most cited articles

PADDY DRYING IN MIXED ADSORPTION DRYER WITH ZEOLITE: DRYING RATE AND TIME ESTIMATION PENGARUH PROSES PENGERINGAN RIMPANG TEMULAWAK (Curcuma xanthorriza ROXB) TERHADAP KANDUNGAN DAN KOMPOSISI KURKUMINOID Characteristics and Free Radical Scavenging Activity of Zinc Oxide (ZnO) Nanoparticles Derived from Extract of Coriander (Coriandrum sativum L.) Influence of Microwave Irradiation on Extraction of Chitosan from Shrimp Shell Waste INFLUENCE OF INITIAL pH SOLUTION ON BIOFILM FORMATION AND CORROSION OF CARBON STEEL BY Serratia marcescens More cited articles

Last update:

Recycling of Bottle Grade PET: Influence of HDPE Contamination on the Microstructure and Mechanical Performance of 3D Printed Parts
Joanne Vaucher, Adrien Demongeot, Véronique Michaud, Yves Leterrier. Polymers, 14 (24), 2022. doi: 10.3390/polym14245507
Effect of water on the solubility and diffusivity of hydrocarbons in polyethylene
Jose Román Galdámez, Adam T. Jones, Ronald P. Danner. Polymer Engineering & Science, 55 (6), 2015. doi: 10.1002/pen.24096
Discrete element approach to simulate coupled hygrothermal transfer: application to conventional and composite materials
A Ammar, W Leclerc, H Haddad, A Jbeli, M Guessasma. Modelling and Simulation in Materials Science and Engineering, 31 (6), 2023. doi: 10.1088/1361-651X/ace3e3

Last update: 2024-11-12 22:32:06

No citation recorded.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Reaktor journal and Department of Chemical Engineering Diponegoro University as the journal publisher. Copyright encompasses exclusive rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc., will be allowed only with a written permission from Reaktor journal and Department of Chemical Engineering Diponegoro University.