BibTex Citation Data :
@article{Reaktor22368, author = {Fahriya Sari and Dede Yanto and Gustan Pari}, title = {Activated Carbon Derived From OPEFB by One Step Steam Activation and Its Application for Dye Adsorption : Kinetics and Isothermal Studies}, journal = {Reaktor}, volume = {19}, number = {2}, year = {2019}, keywords = {}, abstract = { Activated carbon was prepared from OPEFB by one step steam activation method. The adsorption performance for the removal of acid orange 52 (AO 52), reactive blue 19 (RB 19), basic violet 1 (BV 1) was investigated. Each dye has a different chemical structure such as azoic, anthraquinone, triarylmethane for AO 52, RB 19, and BV 1 respectively. The effects of adsorbent dosage, pH, and contact time on the adsorption process were studied. Experimental data were analyzed by model equations such as Langmuir, Freundlich and Temkin isotherms and it was found that the Langmuir isotherm model best fitted for all three dyes with R2 values is higher than 0.95. Langmuir model assumes a homogeneous nature and monolayer coverage of dye molecules at the outer surface of activated carbon. Adsorption kinetics was determined using pseudo-first-order, pseudo-second-order rate equations, Elovich model and also intraparticle diffusion models. Kinetic studies showed that the pseudo-second-order kinetic model better described the adsorption process with R2 values exceeds 0,99 compared with the other kinetics model. The SEM images showed AC pores was well developed with steam activation while wider porosity is created in the macropore range. FT-IR analysis had shown that the AC functional groups were disappeared because of vaporization the volatile materials when the heating process. Keywords: Activated Carbon, Adsorption Isotherms, Kinetic, OPEFB, Steam Activation }, issn = {2407-5973}, pages = {68--76} doi = {10.14710/reaktor.19.2.68-76}, url = {https://ejournal.undip.ac.id/index.php/reaktor/article/view/22368} }
Refworks Citation Data :
Activated carbon was prepared from OPEFB by one step steam activation method. The adsorption performance for the removal of acid orange 52 (AO 52), reactive blue 19 (RB 19), basic violet 1 (BV 1) was investigated. Each dye has a different chemical structure such as azoic, anthraquinone, triarylmethane for AO 52, RB 19, and BV 1 respectively. The effects of adsorbent dosage, pH, and contact time on the adsorption process were studied. Experimental data were analyzed by model equations such as Langmuir, Freundlich and Temkin isotherms and it was found that the Langmuir isotherm model best fitted for all three dyes with R2 values is higher than 0.95. Langmuir model assumes a homogeneous nature and monolayer coverage of dye molecules at the outer surface of activated carbon. Adsorption kinetics was determined using pseudo-first-order, pseudo-second-order rate equations, Elovich model and also intraparticle diffusion models. Kinetic studies showed that the pseudo-second-order kinetic model better described the adsorption process with R2 values exceeds 0,99 compared with the other kinetics model. The SEM images showed AC pores was well developed with steam activation while wider porosity is created in the macropore range. FT-IR analysis had shown that the AC functional groups were disappeared because of vaporization the volatile materials when the heating process.
Keywords: Activated Carbon, Adsorption Isotherms, Kinetic, OPEFB, Steam Activation
Article Metrics:
Last update:
Adsorption of crystal violet on activated bamboo fiber powder from water: preparation, characterization, kinetics and isotherms
Potential of wood ash in purification of biogas
Biogas upgrade using modified natural clay
Last update: 2025-01-14 21:31:07
In order for REAKTOR to publish and disseminate research articles, we need non-exclusive publishing rights (transferred from the author(s) to the publisher). This is determined by a publishing agreement between the Author(s) and REAKTOR. This agreement deals with transferring or licensing the publishing copyright to REAKTOR while Authors still retain significant rights to use and share their published articles. REAKTOR supports the need for authors to share, disseminate, and maximize the impact of their research and these rights in any databases.
As a journal author, you have the right to use your article for many purposes, including by your employing institute or company. These Author rights can be exercised without the need to obtain specific permission. Authors publishing in BCREC journals have wide rights to use their works for teaching and scholarly purposes without needing to seek permission, including, but not limited to:
Authors/Readers/Third Parties can copy and redistribute the material in any medium or format and remix, transform, and build upon the material for any purpose, even commercially. Still, they must give appropriate credit (the name of the creator and attribution parties (authors detail information), a copyright notice, an open access license notice, a disclaimer notice, and a link to the material), provide a link to the license, and indicate if changes were made (Publisher indicates the modification of the material (if any).
Authors/Readers/Third Parties can read, print and download, redistribute or republish the article (e.g., display in a repository), translate the article, download for text and data mining purposes, reuse portions or extracts from the article in other works, sell or re-use for commercial purposes, remix, transform, or build upon the material, they must distribute their contributions under the same license as the original Creative Commons Attribution-ShareAlike (CC BY-SA).
JURNAL REAKTOR (p-ISSN: 0852-0798; e-ISSN: 2407-5973)
Published by Departement of Chemical Engineering, Diponegoro University
