BibTex Citation Data :
@article{Reaktor3175, author = {Abadi Jading and Eduard Tethool and Paulus Payung and Sarman Gultom}, title = {KARAKTERISTIK FISIKOKIMIA PATI SAGU HASIL PENGERINGAN SECARA FLUIDISASI MENGGUNAKAN ALAT PENGERING CROSS FLOW FLUIDIZED BED BERTENAGA SURYA DAN BIOMASSA}, journal = {Reaktor}, volume = {13}, number = {3}, year = {2011}, keywords = {fluidized bed dryer; physicochemical; sago starch}, abstract = { PHYSICOCHEMICAL CHARACTERISTICS OF SAGO STARCH OBTAINED FROM FLUIDIZED BED DRYING USING SOLAR AND BIOMASS POWERED CROSS FLOW FLUIDIZED BED DRYER. The research aim is to study the comparative quality of sago starch drying results using cross flow fluidized bed dryer powered by solar and biomass in conventional drying, particularly the chemical composition and physicochemical characteristics. This research was conducted through a drying phase of wet sago starch using a cross flow fluidized bed dryer, and drying in conventional as well as dried sago starch quality testing results are drying. The results of this study indicate that dry sago starch which has been drained by means of cross flow fluidized bed dryer has a chemical composition that does not vary much with starch which is dried by conventional drying, so that the dried sago starch produced by the dryer is very good. On the other hand the use of dryers is the more correct because the physicochemical properties of sago starch using a low drying temperature and drying time is short. Tujuan penelitian ini adalah mempelajari perbandingan kualitas pati sagu hasil pengeringan menggunakan alat pengering cross flow fluidized bed bertenaga surya dan biomassa dengan pengeringan secara konvensional, khususnya komposisi kimia dan karakteristik fisikokimia. Penelitian ini dilakukan melalui beberapa tahapan yaitu pengeringan pati sagu basah menggunakan alat pengering cross flow fluidized bed , pengeringan secara konvensional serta pengujian kualitas pati sagu kering hasil pengeringan. Hasil dari penelitian ini menunjukkan bahwa pati sagu kering yang telah dikeringkan dengan alat pengering cross flow fluidized bed memiliki komposisi kimia yang tidak berbeda jauh dengan pati yang dikeringkan dengan cara pengeringan secara konvensional, sehingga pati sagu kering yang dihasilkan oleh alat pengering tersebut sangat baik. Di sisi lain penggunaan alat pengering ini semakin memperbaiki sifat fisikokimia pati sagu sebab menggunakan suhu pengeringan yang rendah dan waktu pengeringan yang singkat. Kata Kunci: pengering unggun terfluidakan; fisikokimia; pati sagu }, issn = {2407-5973}, pages = {155--164} doi = {10.14710/reaktor.13.3.155-164}, url = {https://ejournal.undip.ac.id/index.php/reaktor/article/view/3175} }
Refworks Citation Data :
PHYSICOCHEMICAL CHARACTERISTICS OF SAGO STARCH OBTAINED FROM FLUIDIZED BED DRYING USING SOLAR AND BIOMASS POWERED CROSS FLOW FLUIDIZED BED DRYER. The research aim is to study the comparative quality of sago starch drying results using cross flow fluidized bed dryer powered by solar and biomass in conventional drying, particularly the chemical composition and physicochemical characteristics. This research was conducted through a drying phase of wet sago starch using a cross flow fluidized bed dryer, and drying in conventional as well as dried sago starch quality testing results are drying. The results of this study indicate that dry sago starch which has been drained by means of cross flow fluidized bed dryer has a chemical composition that does not vary much with starch which is dried by conventional drying, so that the dried sago starch produced by the dryer is very good. On the other hand the use of dryers is the more correct because the physicochemical properties of sago starch using a low drying temperature and drying time is short.
Tujuan penelitian ini adalah mempelajari perbandingan kualitas pati sagu hasil pengeringan menggunakan alat pengering cross flow fluidized bed bertenaga surya dan biomassa dengan pengeringan secara konvensional, khususnya komposisi kimia dan karakteristik fisikokimia. Penelitian ini dilakukan melalui beberapa tahapan yaitu pengeringan pati sagu basah menggunakan alat pengering cross flow fluidized bed, pengeringan secara konvensional serta pengujian kualitas pati sagu kering hasil pengeringan. Hasil dari penelitian ini menunjukkan bahwa pati sagu kering yang telah dikeringkan dengan alat pengering cross flow fluidized bed memiliki komposisi kimia yang tidak berbeda jauh dengan pati yang dikeringkan dengan cara pengeringan secara konvensional, sehingga pati sagu kering yang dihasilkan oleh alat pengering tersebut sangat baik. Di sisi lain penggunaan alat pengering ini semakin memperbaiki sifat fisikokimia pati sagu sebab menggunakan suhu pengeringan yang rendah dan waktu pengeringan yang singkat.
Kata Kunci: pengering unggun terfluidakan; fisikokimia; pati sagu
Article Metrics:
Last update:
Profile of Modified Sorghum Flour Fermented by Lactobacillus Brevis
Post-harvest handling of sago and the sustainability of the processed results
Physicochemical and Morphological Characteristics of Starch and Flour Obtained from Green Banana cv. Raja (Musa paradisiaca cv. Raja) in West Sumatra, Indonesia
Profile of Modified Sorghum Flour Fermented byLactobacillus Brevis
The effect of water content and cooling temperature on the increase of type III resistant starches (RS III) in lesser yam (Dioscorea esculenta L.) flour
Karakteristik Fisik, Kimia, Fungsional, dan Sensori Nasi Gurih Instan Dibandingkan dengan Nasi Putih Instan
The utilization of cellulose fiber from bagasse as natural reinforcement agent in biodegradable packaging production
The potential of active packaging for tuna
Synthesis and physicochemical characterization of sago starch-porang glucomannan hydrogels crosslinked fumaric acid as a new material for drug delivery system
Acetylated sago starch-based antimicrobial edible film
Physical and chemical characterization of composite flour from canna flour (Canna edulis) and lima bean flour (Phaseolus lunatus)
Properties of Sago Starch-Based Biopolymers with Clay, Cellulose, Zinc Oxide and Chitosan Fillers
Effect of Sago Starch Concentrations, Stirring Speeds, and Lemongrass Oil Concentration for Edible Film Production Using Solvent Casting Method
Food Sustainability, Environmental Awareness, and Adaptation and Mitigation Strategies for Developing Countries
The functional properties of starch from arrowroot (Maranta arundinacea) tubers using Microwave Assisted Extraction (MAE)
PENGEMBANGAN BERAS ANALOG DENGAN MEMANFAATKAN JAGUNG PUTIH
Last update: 2025-01-14 10:18:11
Organoleptic, chemical, and physical characteristics of sago (Metroxylon spp.) analog rice supplemented with red bean (Phaseolus vulgaris) flour as a functional food
In order for REAKTOR to publish and disseminate research articles, we need non-exclusive publishing rights (transferred from the author(s) to the publisher). This is determined by a publishing agreement between the Author(s) and REAKTOR. This agreement deals with transferring or licensing the publishing copyright to REAKTOR while Authors still retain significant rights to use and share their published articles. REAKTOR supports the need for authors to share, disseminate, and maximize the impact of their research and these rights in any databases.
As a journal author, you have the right to use your article for many purposes, including by your employing institute or company. These Author rights can be exercised without the need to obtain specific permission. Authors publishing in BCREC journals have wide rights to use their works for teaching and scholarly purposes without needing to seek permission, including, but not limited to:
Authors/Readers/Third Parties can copy and redistribute the material in any medium or format and remix, transform, and build upon the material for any purpose, even commercially. Still, they must give appropriate credit (the name of the creator and attribution parties (authors detail information), a copyright notice, an open access license notice, a disclaimer notice, and a link to the material), provide a link to the license, and indicate if changes were made (Publisher indicates the modification of the material (if any).
Authors/Readers/Third Parties can read, print and download, redistribute or republish the article (e.g., display in a repository), translate the article, download for text and data mining purposes, reuse portions or extracts from the article in other works, sell or re-use for commercial purposes, remix, transform, or build upon the material, they must distribute their contributions under the same license as the original Creative Commons Attribution-ShareAlike (CC BY-SA).
JURNAL REAKTOR (p-ISSN: 0852-0798; e-ISSN: 2407-5973)
Published by Departement of Chemical Engineering, Diponegoro University
