THE BEHAVIOR OF SOLUBLE METALS ELUTED FROM Ni/Fe-BASED ALLOY REACTORS AFTER HIGH-TEMPERATURE AND HIGH-PRESSURE  WATER PROCESS

M. Faisal; Hiroyuki Daimon; Koichi Fujie

doi:10.14710/reaktor.14.1.9-16

DOI: https://doi.org/10.14710/reaktor.14.1.9-16

THE BEHAVIOR OF SOLUBLE METALS ELUTED FROM Ni/Fe-BASED ALLOY REACTORS AFTER HIGH-TEMPERATURE AND HIGH-PRESSURE WATER PROCESS

*M. Faisal - Department of Chemical Engineering, Faculty of Engineering, Syiah Kuala University, , Indonesia

Hiroyuki Daimon - Department of Environmental and Life Science, Toyohashi University of Technology, , Japan

Koichi Fujie - Graduate School of Environment and Information Sciences Yokohama National University,, Japan

Published: 1 Apr 2012.

Citation Format:

Abstract

The behavior of heavy metals eluted from the wall of Ni/Fe-based alloy reactors after high-temperature and high-pressure water reaction were studied at temperatures ranging from 250 to 400^oC. For this purpose, water and cysteic acid were heated in two reactor materials which are SUS 316 and Inconel 625. Under the tested conditions, the erratic behaviors of soluble metals eluted from the wall of Ni/Fe-based alloy in high temperature water were observed. Results showed that metals could be eluted even at a short contact time. The presence of air also promotes elution at sub-critical conditions. At sub-critical conditions, a significant amount of Cr was extracted from SUS 316, while only traces of Ni, Fe, Mo and Mn were eluted. In contrast, Ni was removed in significant amounts compared to Cr when Inconel 625 was tested. It was observed that eluted metals tend to increased under acidic conditions and most of those metals were over the limit of WHO guideline for drinking water. The results are significant both on the viewpoint of environmental regulation on disposal of wastes containing heavy metals, toxicity of resulting product and catalytic effect on a particular reaction.

Fulltext

Keywords: environmental; high-temperature and high-pressure water; metal elution; Ni/Fe-based alloy; reactor materials

Article Metrics:

Article Info

Section: Research Article

Language : EN

In Volume 14, Nomor 1, April 2012

Recent articles

KARAKTERISTIK INTERAKSI MEMBRAN-FOULANT DAN FOULANT-FOULANT SEBAGAI DASAR PENGENDALIAN FOULING SINTESIS SENYAWA C18H26O9 DARI HIPTOLIDA HASIL ISOLASI DAUN HYPTIS PECTINATA THE BEHAVIOR OF SOLUBLE METALS ELUTED FROM Ni/Fe-BASED ALLOY REACTORS AFTER HIGH-TEMPERATURE AND HIGH-PRESSURE WATER PROCESS More recent articles

Most cited articles

Synthesis of Matrix Si-K-HAs Gel from Geothermal Sludge and Peat THE EFFECT OF TYPE ZEOLITE ON THE GAS TRANSPORT PROPERTIES OF POLYIMIDE-BASED MIXED MATRIX MEMBRANES APPLICATION OF MODEL PREDICTIVE CONTROL (MPC) TUNING STRATEGY IN MULTIVARIABLE CONTROL OF DISTILLATION COLUMN Assessment of Compost Maturity using The Static Respirometry Index APLIKASI SORBITOL PADA PRODUKSI BIODEGRADABLE FILM DARI NATA DE CASSAVA More cited articles

Last update:

Catalytic effect of different reactor materials under subcritical water conditions: decarboxylation of cysteic acid into taurine
M Faisal. IOP Conference Series: Materials Science and Engineering, 334 , 2018. doi: 10.1088/1757-899X/334/1/012076

Last update: 2025-01-15 02:40:46

No citation recorded.

In order for REAKTOR to publish and disseminate research articles, we need non-exclusive publishing rights (transferred from the author(s) to the publisher). This is determined by a publishing agreement between the Author(s) and REAKTOR. This agreement deals with transferring or licensing the publishing copyright to REAKTOR while Authors still retain significant rights to use and share their published articles. REAKTOR supports the need for authors to share, disseminate, and maximize the impact of their research and these rights in any databases.

As a journal author, you have the right to use your article for many purposes, including by your employing institute or company. These Author rights can be exercised without the need to obtain specific permission. Authors publishing in BCREC journals have wide rights to use their works for teaching and scholarly purposes without needing to seek permission, including, but not limited to:

use for classroom teaching by the Author or the Author's institution and presentation at a meeting or conference and distributing copies to attendees;
use for internal training by the author's company;
distribution to colleagues for their research use;
use in a subsequent compilation of the author's works;
inclusion in a thesis or dissertation;
reuse of portions or extracts from the article in other works (with full acknowledgment of the final article);
preparation of derivative works (other than commercial purposes) (with full acknowledgment of the final article);
voluntary posting on open websites operated by the author or the author’s institution for scholarly purposes,

(but it should follow the open access license of Creative Common CC-by-SA License).

Authors/Readers/Third Parties can copy and redistribute the material in any medium or format and remix, transform, and build upon the material for any purpose, even commercially. Still, they must give appropriate credit (the name of the creator and attribution parties (authors detail information), a copyright notice, an open access license notice, a disclaimer notice, and a link to the material), provide a link to the license, and indicate if changes were made (Publisher indicates the modification of the material (if any).

Authors/Readers/Third Parties can read, print and download, redistribute or republish the article (e.g., display in a repository), translate the article, download for text and data mining purposes, reuse portions or extracts from the article in other works, sell or re-use for commercial purposes, remix, transform, or build upon the material, they must distribute their contributions under the same license as the original Creative Commons Attribution-ShareAlike (CC BY-SA).