DOI: https://doi.org/10.14710/rotasi.8.2.14-18

AN ELASTIC-PLASTIC MICROCONTACT MODEL OF ASPERITIES

*Jamari Jamari  -  Mechanical Engineering Department, Faculty of Engineering, University of Diponegoro, Indonesia

Citation Format:
Abstract
In this paper a theoretical model for the elastic-plastic microcontact model of asperities is presemted. Relation
of the contact parameters, such as the mean contact pressure, the contact area and the contact load as a function of the
contact interference are modeled in the elastic, elastic-plastic and fully plastic contact regime. The model is verified by
the experimental results and is compared with published theoretical models. Very good agreement between the present
model and the experimental results are found compared to the prediction of the other contact models.
Fulltext View|Download

Article Metrics:

Article Info
Section: Articles research
Language : EN
Recent articles
PEMBUATAN SPESIMEN UJI LELAH TIPE CONTINUOUS RADIUS MENGGUNAKAN MESIN BUBUT CNC PENGUJIAN CAMPURAN BAHAN BAKAR PREMIUM – METHANOL PADA MESIN SEPEDA MOTOR 4 LANGKAH PENGARUH TERHADAP EMISI GAS BUANG SIMULASI EFEK TURBO CYCLONE TERHADAP KARAKTERISTIK ALIRAN UDARA PADA SALURAN UDARA SUATU MOTOR BAKAR MENGGUNAKAN COMPUTATIONAL FLUID DYNAMICS More recent articles
Most cited articles
KAJI EKSPERIMENTAL PENGARUH TEMPERATUR BIODIESEL MINYAK SAWIT TERHADAP PERFORMANSI MESIN DIESEL DIRECT INJECTION PUTARAN KONSTAN PENERAPAN DAN PENGUJIAN MODEL TEKNOLOGI ANAEROB DIGESTER UNTUK PENGOLAHAN SAMPAH BUAH-BUAHAN DARI PASAR TRADISIONAL ANALISIS EFISIENSI RAW GRIDING MILL PADA PROSES PEMBUATAN SEMEN PENGGUNAAN PARAFFIN WAX SEBAGAI PENYIMPAN KALOR PADA PEMANAS AIR TENAGA MATAHARI THERMOSYPHON DIFFUSION BONDING : AN ADVANCED OF MATERIAL PROCESS More cited articles

Last update:

No citation recorded.

Last update: 2025-04-01 08:16:49

No citation recorded.