DOI: https://doi.org/10.14710/rotasi.8.3.20-23

ANALISA PEMADATAN TANAH LIAT DENGAN MESIN EXTRUDER

*Seno Darmanto  -  Staf Pengajar Jurusan D-3 Teknik Mesin FT-UNDIP, Indonesia

Citation Format:
Abstract
Research is done to analyze work performance of extruder machine to compress clay for red brick. The
analyzing work performance of extruder machine is based on dry density of clay and water content. Research is done in
industry and laboratory with doing observation and taking specimen of clay that had been given treatment in extruder
machine. And based on analyzing data it shows that dry density of clay in extruder machine is in range 1.45 gram/cm3 –
1.55 gram/cm3 and water content can be range 27% -31%.
Fulltext View|Download

Article Metrics:

Article Info
Section: Articles research
Language : EN
Recent articles
ANALISA CACAT COR PADA PROSES PENGECORAN BURNER KOMPOR ACTIVE MAGNETIC BEARINGS FOR FRICTIONLESS ROTATING MACHINERIES UJI PERFORMA BIODISEL DARI MINYAK JARAK PAGAR YANG DIPRODUKSI SECARA ENZIMATIS PADA MESIN DISEL More recent articles
Most cited articles
PERHITUNGAN EFISIENSI DAN KONVERSI DARI BAHAN BAKAR SOLAR KE GAS PADA BOILER EBARA HKL 1800 KA PENGARUH PERUBAHAN SAAT PENYALAAN (IGNITION TIMING) TERHADAP PRESTASI MESIN PADA SEPEDA MOTOR 4 LANGKAH DENGAN BAHAN BAKAR LPG MATCHING AND STITCHING FOR SURFACE IDENTIFICATION Pengaruh Post Weld Heat Treatment (Pwht) dengan Pemanas Induksi Terhadap Sifat Mekanik dan Struktur Mikro Sambungan Las Shield Metal Arc Welding (Smaw) pada Pipa API 5l X52 SIMULASI DINAMIKA HELIKOPTER MINI PADA KONDISI TERBANG HOVER DENGAN KONTROL LQR More cited articles

Last update:

No citation recorded.

Last update: 2024-11-24 07:23:55

No citation recorded.