General information
Published: 06-01-2023
Total Articles:
(including Editorial)		 10
Total Authors: 21
Total Countries: 2
Indonesia (23)
Timor-Leste (1)
Indonesia 50275
Universitas Islam Raden Rahmat Malang
Aimutin Dili - Timor Leste
Jawa Barat 16412
Indonesia
Nusa Cendana University
Departemen Teknik Mesin
Undip
Universitas Nusa Cendana-Kupang
Indonesia 35365
Teknik Mesin Universitas Jembar
Universitas Jember
Jawa Timur 68121
Issues list
Vol 25, No 1 (2023): VOLUME 25, NOMOR 1, JANUARI 2023 Vol 24, No 4 (2022): VOLUME 24, NOMOR 4, OKTOBER 2022 Vol 24, No 3 (2022): VOLUME 24, NOMOR 3, JULI 2022 Vol 24, No 2 (2022): VOLUME 24, NOMOR 2, APRIL 2022 Vol 24, No 1 (2022): VOLUME 24, NOMOR 1, JANUARI 2022 Vol 23, No 4 (2021): VOLUME 23, NOMOR 4, OKTOBER 2021 Vol 23, No 3 (2021): VOLUME 23, NOMOR 3, JULI 2021 Vol 23, No 2 (2021): VOLUME 23, NOMOR 2, APRIL 2021 Vol 23, No 1 (2021): VOLUME 23, NOMOR 1, JANUARI 2021 Complete issues

Vol 24, No 4 (2022): VOLUME 24, NOMOR 4, OKTOBER 2022

Table of Contents

Articles research

Perancangan Mesin Balancing Dinamis pada Putaran Maksimal 1485 RPM dengan Metode 4 Massa Coba

Imron Fahreza Yudha, Murni Murni

| Language: EN | DOI: 10.14710/rotasi.24.4.%p
Received: 30 Jun 2022; Revised: 15 Aug 2022; Accepted: 30 Aug 2022; Published: 31 Oct 2022.
 PDF
1-7
Analisis Fisika dan Kimia Material Polimer Ramah Lingkungan Edible film Berbahan Rumput Laut E-Cottonii Sebagai Pengganti Kemasan Plastik

Agus Dwi Putra, Yayi Febdia Pradani, Bella Cornellia Tjiptady

| Language: ID | DOI: 10.14710/rotasi.24.4.8-15
Received: 17 Sep 2022; Revised: 10 Oct 2022; Accepted: 11 Oct 2022; Published: 31 Oct 2022.
 PDF
8-15
Analisa Cacat yang Terjadi pada Proses Pembuatan Roda Gigi Lurus Melalui Proses Pengecoran Besi Cor Nodular yang Menggunakan Chill

Natalino Fonseca D.S. Guterres

| Language: ID | DOI: 10.14710/rotasi.24.4.16-25
Received: 16 Oct 2022; Revised: 29 Oct 2022; Accepted: 30 Oct 2022; Published: 31 Oct 2022.
 PDF
16-25
Low Cost Mechanical Prosthetic Hand (Metic Hand) Design For Under Elbow Hand Amputation Patients

Yasya Khalif Perdana Saleh, Rifky Ismail, Mochammad Ariyanto

| Language: EN | DOI: 10.14710/rotasi.24.4.26-32
Received: 3 Oct 2022; Revised: 28 Oct 2022; Accepted: 30 Oct 2022; Published: 31 Oct 2022.
 PDF
26-32
Penerapan Analisis Dimensional Pada Perubahan Tekanan Udara Perangkat Oscillating Water Column (OWC)

Jahirwan Ut Jasron

| Language: ID | DOI: 10.14710/rotasi.24.4.33-40
Received: 17 Sep 2022; Revised: 20 Oct 2022; Accepted: 21 Oct 2022; Published: 31 Oct 2022.
 PDF
33-40
Pengaruh Rasio Tekanan Kompresor Turbocharger Terhadap Kinerja Mesin Diesel dan Emisi NOX

Matheus Dwinanto

| Language: EN | DOI: 10.14710/rotasi.24.4.41-48
Received: 22 Oct 2022; Revised: 30 Oct 2022; Accepted: 31 Oct 2022; Published: 31 Oct 2022.
 PDF
41-48
Analisa Kerusakan pada Secondary Superheater Tube di Sistem Boiler pada Power Plant Akibat Proses Soot Blowing

R Rusnaldy

| Language: EN | DOI: 10.14710/rotasi.24.4.48-56
Received: 9 Sep 2022; Revised: 29 Sep 2022; Accepted: 4 Oct 2022; Published: 31 Oct 2022.
 PDF
48-56
Studi Eksperimen Tungku Biomassa pada Proses Pengeringan Chip Umbi Porang melalui Rumah Plastik Ultra-Violet (Solar Dryer) Sistem Hibrid

Verdy A. Koehuan, Eflinda Milo, Defmit B. N. Riwu

| Language: ID | DOI: 10.14710/rotasi.24.4.57-64
Received: 14 Sep 2022; Revised: 26 Oct 2022; Accepted: 27 Oct 2022; Published: 31 Oct 2022.
 PDF
57-64
Heat Transfer Characteristics of Hybrid Nanofluids Al2O3/ZnO as Working Fluid in Electronic Cooling Systems

Devia Gahana Cindi Alfian

| Language: EN | DOI: 10.14710/rotasi.24.4.65-71
Received: 13 Oct 2022; Revised: 28 Oct 2022; Accepted: 29 Oct 2022; Published: 31 Oct 2022.
 PDF
65-71
Pengaruh Layer Height, Nozzle Temperature, dan Printing Speed Terhadap Tingkat Kekasaran pada Keycaps Mechanical Keyboard dengan Filamen 3d Printing Polyethylene Terephthalate Glycol (PETG)

Muhammad Hafri Evan Tofianto, Dwi Djumhariyanto, Muhammad Trifiananto, Ahmad Syuhri, Agus Triono

| Language: ID | DOI: 10.14710/rotasi.24.4.%p
Received: 27 Jul 2022; Revised: 20 Oct 2022; Accepted: 20 Oct 2022; Published: 31 Oct 2022.
 PDF
72-78