DOI: https://doi.org/10.14710/teknik.v41i1.25328

Study of the Effect of Bulb Ratio and Blade Angle on Propeller Turbine Performance in Horizontal Flow using Numerical Simulation

*Akhmad Nurdin orcid  -  Departement of Mechanical Engineering, Sebelas Maret University, Indonesia
Dwi Aries Himawanto  -  Departement of Mechanical Engineering, Sebelas Maret University, Indonesia
Syamsul Hadi  -  Departement of Mechanical Engineering, Sebelas Maret University, Indonesia
Open Access Copyright (c) 2020 TEKNIK

Citation Format:
Abstract

This paper discusses numerical simulations of horizontal flow propeller turbines. Static bulbs located before the turbine can be used to increase water velocity and potentially increase the turbine's performance. The blade angle affects the gap between the blades, and this will also affect the performance of the turbine. Numerical simulations were conducted by using software Solid Works Flow Simulation 2016 and by using five blades in a static state. This study aimed to determine the effect of the bulb ratio and blade angle on the propeller turbine characteristics on horizontal flow. Bulb Ratio variations used in this study were 0, 0.4, 0.6, and 0.8, while the angle variations used were 20, 25, and 30 degrees. Each variation was tested at 0.02 m3/second. The results of this study indicated that the bulb ratio 0.6 with the 25-degree blade angle produces the highest torque

Fulltext View|Download
Keywords: bulb ratio; blade angle; propeller; turbine; static bulb; solidworks

Article Metrics:

Article Info
Section: Artikel
Language : EN
Recent articles
Redesain Awana Condotel Menggunakan Metode Flat slab Berdasarkan SNI 2847-2013 Performansi Kolektor Surya Pada Mesin Pendingin Yang Menggunakan Pasangan Adsorpsi Karbon Aktif Serbuk-Metanol Pemodelan Pupuk Rilis Lambat Dengan Fly Ash sebagai Matriks Inert yang Dilapisi oleh Ethylcellulose Back Matter Front Matter Erratum More recent articles
Most cited articles
KARAKTERISTIK AKTIVITAS PEDAGANG KAKI LIMA PADA KAWASAN KOMERSIAL DI PUSAT KOTA Studi Kasus: Simpang Lima, Semarang Studi Kerentanan Air Tanah Terhadap Kontaminan Menggunakan Metode Drastic di Kota Pekalongan Penentuan Skala Prioritas Penanganan Jalan Kabupaten di Kabupaten Kudus Dengan Metode Analytical Hierarchy Process PEMANFAATAN KREDIT MIKRO PERUMAHAN BAGI MASYARAKAT BERPENGHASILAN RENDAH DI BMT MITRA KHASANAH KOTA SEMARANG PENGARUH PEMBEBASAN LAHAN TERHADAP RISIKO PROYEK KONSTRUKSI (STUDI KASUS SOCIAL ENGINEERING PROYEK JALAN TOL RUAS SEMARANG BAWEN) More cited articles
  1. Chen, Z., Joo-cheong, K., Myeong-hwan, I.& Young-do, C.(2014). Analysis on the Performance and Internal Flow of a Tubular Type Hydro Turbine for Vessel Cooling System 2 . Turbine Model and Numerical Methods, 38(10),1244–50
  2. Dariusz, B., Tomasz , W., & Damian, L. (2015). Electrical Energy Recovery From Network Water Pressure. Selected Problems of Electrical Engineering and Electronics (WZEE), Kielce, 1-6”
  3. Elbatran, A. H., Yaakob, O. B., Ahmed, Y. M. & Shabara, H. M. (2015). Operation, Performance and Economic Analysis of Low Head Micro-Hydropower Turbines for Rural and Remote Areas: A Review. Renewable and Sustainable Energy Reviews (43), 40–50
  4. Farhan, A. P. (2016). Optimalisasi Desain Turbin PLTA Pico- Hydro Untuk Meningkatkan Efisiensi Daya Dengan Bantuan Software CFD Dan Konsep Reverse Engineering. Skripsi Fakultas Teknik Jurusan Teknik Mesin Universitas Sebelas Maret
  5. Nurdin, A. & Himawanto, D.A.( 2019). Studi Numerik Kekuatan Material Transmisi Roda Gigi Pico Hydro. Jurnal Teknik Mesin Indonesia, 14(1), 24-29
  6. Ramos, H. M., Simão, M. & Borga, A. (2013). Experiments and CFD Analyses for a New Reaction Microhydro Propeller with Five Blades. Journal of Energy Engineering ,139 (2), 109–17
  7. Ramos, H.M, Borga, A. & Simão, M. (2009). New Design Solutions for Low-Power Energy Production in Water Pipe Systems. Water Science and Engineering, 2(4), 69–84
  8. Sakti, A., Prasetyo, A., Tjahjana D. P. & Hadi, S. ( 2019). The Horizontal Axis Type of Savonius Water Turbine in Pipe Using Solidwork Simulation The Horizontal Axis Type of Savonius Water Turbine in Pipe Using SolidWork Simulation” 030042 (April): 1–6. https://doi.org/10.1063/1.5098217
  9. Samora, I., Hasmatuchi, V., Münch-Alligné, C., Franca, M., J., Schleiss, A. J., & Ramos, H. M. (2016). Experimental Characterization of a Five Blade Tubular Propeller Turbine for Pipe Inline Installation. Renewable Energy, 95, 356–66. https://doi.org/10.1016/j.renene.2016.04.023
  10. Shalih, A. (2018). Studi Eksperimental Pengaruh Sudut Kemiringan Sudu Terhadap Unjuk Kerja Turbin Propeler Pikohidro. Skripsi Fakultas Teknik Jurusan Teknik Mesin. Universitas Sebelas Maret
  11. Shukla, R. S., & Parashar, C.(2017). Design of Propeller Turbine for Micro Hydro Power Station Using CFD. International Journal of Scientific Engineering and Science, 1(7), 37–41
  12. Zhu, L., H. P. Zhang, J. G., Meng , X. C. & Lu, L.(2012). Performance of a Bulb Turbine Suitable for Low Prototype Head : Model Test and Transient Numerical Simulation Performance of a Bulb Turbine Suitable for Low Prototype Head ： Model Test and Transient Numerical Simulation.” IOP Conference Series: Earth and Environmental Science 5 (part 4). https://doi.org/10.1088/1755-1315/15/4/042032

Last update:

No citation recorded.

Last update: 2024-11-20 21:56:19

No citation recorded.