DOI: https://doi.org/10.14710/teknik.v44i1.41131

Sifat Kekuatan Tarik dari Sambungan Tunggal Komposit Anyaman Serat Jute-Polypropylene dengan Metode Resistance Welding

Ni Wayan Sugiarti  -  Program Studi Teknik Mesin. Fakultas Teknik, Universitas Udayana, Indonesia
Mathias Noviantoro  -  Program Studi Teknik Mesin. Fakultas Teknik, Universitas Udayana, Indonesia
I Gusti Ketut Sukadana  -  Program Studi Teknik Mesin. Fakultas Teknik, Universitas Udayana, Indonesia
*I Dewa Gede Ary Subagia orcid scopus  -  Program Studi Teknik Mesin. Fakultas Teknik, Universitas Udayana, Indonesia
Open Access Copyright (c) 2023 TEKNIK

Citation Format:
Abstract

Makalah ini menyampaikan hasil penelitian kekuatan tarik sambungan resistance welding (RW) dari komposit berbasis anyaman serat jute matrik polypropylene (JFRP). Metode RW dilakukan menggunakan pengaliran arus listrik pada kawat nikelin. Pada proses pengelasan untuk kawat nikelin adalah divariasikan yaitu ukuran diameter 0,3 mm dan 0,5 mm. Tujuan penelitian untuk menyelidiki kekuatan sambungan menggunakan metode RW menurut variasi diameter kawat nikelin. Pada pengujian masing-masing sampel diujikan sebanyak 5 kali pengulangan yang didasarkan pada standar ASTM D 638. Pengujian tarik dilakukan pada Universal Testing Machine (UTM) dengan cross head speed 3 mm/min, dan load cell 5 kN. Hasil penelitian menunjukkan bahwa JFRP dalam sambungan lapisan tunggal yang diikat dengan kawat nikelin berdiameter 0,5mm memiliki kekuatan tarik tertinggi dibandingkan dengan kawat nikelin berdiameter 0,3mm masing-masing adalah 213,58±0,05 MPa dan 210,34±0,05 MPa. Sementara itu, Modulus Young dari sambungan lapisan tunggal JFRP dengan diameter kawat nikelin berdiameter 0,3 mm memiliki nilai lebih tinggi dari kawat nikelin dengan diameter 0,5mm masing-masing adalah 8,16±0,05 GPa dan 8,44±0,05 GPa. Kemudian, regangan patah dari JFRP memiliki nilai yang sama 4% untuk kedua model sambungan. Kesimpulan menunjukkan bahwa pengelasan resistensi cukup menjanjikan untuk mengikat komposit termoplastik. Selain itu, diameter kawat nikelin adalah faktor penting yang mempengaruhi sifat mekanis sambungan.

Fulltext View|Download
Keywords: anyaman serat jute; las resistensi; kawat nikelin; komposit; sambungan tunggal

Article Metrics:

Article Info
Section: Artikel
Language : ID
Recent articles
Penilaian Persepsi Risiko Keselamatan Kerja pada Proyek Konstruksi menggunakan Adaptasi Kuesioner Municipal Public Health Rotterdam-Rijnmond Manajemen Komunikasi Proyek Konstruksi di Masa Pandemi Covid-19 Studi Komparasi Dampak Lingkungan Produksi Campuran Aspal Hangat Modifikasi Polimer EVA dengan Campuran Aspal Panas Skala Laboratorium Menggunakan Life Cycle Assessment (LCA) Back Matter Front Matter More recent articles
Most cited articles
PERSEPSI INTEGRASI TATA GUNA LAHAN PADA KAWASAN WATERFRONT DEVELOPMENT (Studi Kasus: Kanal Banjir Barat Semarang) Penentuan Skala Prioritas Penanganan Jalan Kabupaten di Kabupaten Kudus Dengan Metode Analytical Hierarchy Process PROSPEK INDUSTRI GALANGAN KAPAL DALAM NEGERI GUNA MENGHADAPI PERSAINGAN GLOBAL POTENSI MIKROALGA SEBAGAI SUMBER BIOMASA DAN PENGEMBANGAN PRODUK TURUNANNYA UNJUK KERJA REAKTOR PLASMA DIELECTRIC BARRIER DISCHARGE UNTUK PRODUKSI BIODIESEL DARI MINYAK KELAPA SAWIT More cited articles
  1. Ahire, Bhupendra S., and Prof. Sharad D. Kachave. (2017). Comparison of Riveted, Bonded & Hybrid Joints Using FEA. International Advanced Research Journal in Science, Engineering and Technology(IARJSET), 4(1):25–30
  2. ASTM D638. (2006). Standard Test Method for Tensile Properties of Plastics
  3. Broughton, W. R., L. E. Crocker, and M. R. L. Gower. (2002). Design Requirements for Bonded and Bolted Composite Structures. NPL Report MATC(A)65, 46
  4. da Costa, Anahi Pereira, Edson Cocchieri Botelho, Michelle Leali Costa, Nilson Eiji Narita, and José
  5. Ricardo Tarpani. (2012). A Review of Welding Technologies for Thermoplastic Composites in Aerospace Applications. Journal of Aerospace Technology and Management, 4(3):255–65
  6. Feng, Ng Lin, Sivakumar Dhar Malingam, and Siva Irulappasamy. (2018). Bolted Joint Behavior of Hybrid Composites. Elsevier Ltd
  7. Ferreira, J. M., H. Silva, J. D. Costa, and M. Richardson. (2005). Stress Analysis of Lap Joints Involving Natural Fibre Reinforced Interface Layers. Composites Part B: Engineering, 36(1):1–7
  8. Fiebig, Isabel, and Volker Schoeppner. (2016). Influence of the Initial Fiber Orientation on the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics. International Journal of Polymer Science, 2016
  9. Haque, Md Shaquibul, and Mohd. Anees Siddiqui. (2016). Plastic Welding: Important Facts and Developments. American Journal of Mechanical and Industrial Engineering, 1(2):15–19
  10. Hariharan E, and Amutheesan R. (2017). Testing and Analysis of Composite Materials Under Tensile Loading With Different Lap Joints. International Journal of Engineering Sciences & Research Technology, 6(10):126–34
  11. Ibrahim, Ahmed Hanafy, and Duane S. Cronin. (2022). Mechanical Testing of Adhesive, Self-Piercing Rivet, and Hybrid Jointed Aluminum under Tension Loading. International Journal of Adhesion and Adhesives, 113:103066
  12. Junno, H., P. Laurinen, E. Haapalainen, L. Tuovinen, and J. Röning. (2005). Resistance Spot Welding Process Identification Using an Extended Knn Method. Pp. 7–12 in Proceedings of the IEEE International Symposium on Industrial Electronics, 2005. ISIE 2005. Vol. I
  13. K Srivastava, Ashok, and Ashutosh Sharma. (2017). Advances in Joining and Welding Technologies for Automotive and Electronic Applications. American Journal of Materials Engineering and Technology, 5(1):7–13
  14. Kushwah, Pushpendra. (2019). Plastic Welding Technique. International Journal For Technological Research In Engineering, 7(3):6199–6200
  15. Liu, Shih Jung, and Hsin Fu Cheng. (2010). The Influence of Interface Geometry on the Joint Strengths of Hot Plate Welded Composites. Journal of Reinforced Plastics and Composites, 29(4):497–509
  16. Mohammed, Layth, M. N. M. Ansari, Grace Pua, Mohammad Jawaid, and M. Saiful Islam. (2015). A Review on Natural Fiber Reinforced Polymer Composite and Its Applications. International Journal of Polymer Science, 2015:1–15
  17. Mucha, Jacek, and Waldemar Witkowski. (2015). The Structure of the Strength of Riveted Joints Determined in the Lap Joint Tensile Shear Test. Acta Mechanica et Automatica, 9(1):44–49
  18. Mucha, Jacek, and Waldemar Witkowski. (2017). Analysis of the Thermomechanical Load Impact on the Riveted Joint Strength. Mechanik NR, 90(2):148–50
  19. Rajmohan, M., M. Balachandar, and D. Kasinathan. (2016). Analysis of Lap Joints in Composite Materials. Indian Journal of Science and Technology, 9(48):3–6
  20. Senguttuvan, N., and J. Lillymercy. (2015). Joint Strength Analysis of Single Lap Joint in Glass Fiber Composite Material. International Journal of Applied Engineering Research, 10(7):16535–45
  21. Shi, H., I. Fernandez-Villegas, and H. E. N. Bersee. (2011). Modelling of Heat Transfer and Consolidation for Thermoplastic Composites Resistance Welding. Pp. 1–6 in 18th International Conference on Composites Materials
  22. Solmaz, M. Yavuz, İbrahim Kocabas, and Mustafa GÜR. (2017). Effect of Riveting on the Joint Strength of Adhesively Bonded Double Lap Joints. Anadolu University Journal of Science and Tehcnology A - Applied Sciences and Engineering, 19(1):1–9
  23. Srinivasan, Dharun Vadugappatty, Atin Aggarwal, I. Sridhar, and Charle Ng. (2018). Effect of Residual Epoxy on Single Lap Joints Performance. Journal of Adhesion, 96(10):883–901
  24. Stavrov, D., and H. E. N. Bersee. (2005). Resistance Welding of Thermoplastic Composites-an Overview. Composites Part A: Applied Science and Manufacturing, 36(1):39–54
  25. Yee, Lee Sim, and Hilton Ahmad. (2016). Experimental Strength of Single-Lap Hybrid Joints on Woven Fabric Kenaf Fiber Composites under Quasi Static Condition. MATEC Web of Conferences, 47:0–5
  26. Yeni, Çınar, Aydın Ülker, Sami Sayer, Uğur Özdemir, and Umut Kocatüfek. (2014). Optimization of Hot Plate Welding Parameters of Glass Fibered Reinforced Polyamide 6 (PA6 GF15) Composite Material by Taguchi Method. Usak University Journal of Material Sciences, 3(1):69–69
  27. Zhigang, H., I. S. Kim, J. S. Son, H. H. Kim, J. H. Seo, and K. C. Jang. (2006). A Study on Numerical Analysis of the Resistance Spot Welding Process. Journal of Achievements in Materials and Manufacturing Engineering, 14(1):140–45

Last update:

No citation recorded.

Last update: 2024-11-21 05:22:59

No citation recorded.