skip to main content

Analisis Faktor – Faktor yang Berpengaruh dalam Implementasi Konsep Green Untuk Peningkatan Kinerja Biaya menggunakan Structural Equation Modelling-Partial Least Square (SEM-PLS)

*Iwan Kurniawan  -  Department of Civil Engineering,Universitas Mercu Buana, Jl. Meruya Selatan Kembangan Jakarta Barat 11650, Indonesia
Albert Eddy Husin scopus publons  -  Magister Teknik Sipil, Fakultas Teknik, Universitas Mercu Buana, Indonesia
Open Access Copyright (c) 2023 TEKNIK

Citation Format:
Abstract

Pembangunan bangunan pabrik yang menerapkan konsep Green sangat dibutuhkan, hal ini sesuai misi dari Sustainable Development Goals 2030, bahwa pada tahun 2030 bangunan baru berkonsep green sebesar 100% dan bangunan eksisting sebesar 60%. Penelitian ini bertujuan untuk menganalisis faktor-faktor yang berpengaruh dalam penerapan Konsep Green terhadap Kinerja Biaya Berbasis Value Engineering dan Life Cycle Cost Analysis dengan mengambil objek pada Bangunan Utama Flour Mill Plant dengan menggunakan metode Structural Equation Modelling – Part Least Square (SEM-PLS). Dari penelitian tersebut terdapat 10 faktor yang paling berpengaruh, yaitu; Performance proyek manajer dengan tingkat pengaruh 88,4%, Perhitungan efisiensi energi dengan tingkat pengaruh 88,1%, Spesifikasi teknis dengan tingkat pengaruh 86,8%, Penyediaan lahan parkir dengan tingkat pengaruh 84,6%, Aturan pendukung dengan tingkat pengaruh 82,8%, Sumber air dengan tingkat pengaruh 82,2%, Fungsi analisis dengan tingkat pengaruh 80,6%, Penerapan sistem penangangan sampah dengan tingkat pengaruh 75,9%, Pemilihan material alternatif 73,1%, dan Biaya energi dengan tingkat pengaruh 72,4%.

Fulltext View|Download
Keywords: bangunan utama Flour Mill; green building; value engineering; life cycle cost analysis, SEM-PLS

Article Metrics:

  1. Abduh, M., & Fauzi, R. T. (2012). Kajian sistem assessment proses konstruksi pada greenship rating tool. KoNTekS 6, November, 111–120
  2. Ahn, Y. H., Jung, C. W., Suh, M., & Jeon, M. H. (2016). Integrated Construction Process for Green Building. Procedia Engineering, 145, 670–676. https://doi.org/10.1016/j.proeng.2016.04.065
  3. Ariadi. (2017). Faktor Kunci Sukses Penerapan Value Engineering (Ve) Pada Bangunan Gedung Di Indonesia. Rekayasa Sipil, 6(2), 77–85
  4. Chen, W. T., Merrett, H. C., Liu, S., Fauzia, N., & Liem, F. N. (2022). A Decade of Value Engineering in Construction Projects. 2022
  5. Dwaikat, L. N., & Ali, K. N. (2016). Green buildings cost premium: A review of empirical evidence. Energy and Buildings, 110(January), 396–403. https://doi.org/10.1016/j.enbuild.2015.11.021
  6. Ebrahim, A., & Wayal, A. S. (2019). BIM based building performance analysis of a green office building. International Journal of Scientific and Technology Research, 8(8), 566–573
  7. Fuller, S. K., & Petersen, S. R. (1996). LCCosting Manual for the Federal Energy Management Program. In NIST Handbook 135 (Issue 135)
  8. Ghozali & Laten 2015. (2018). Partial Least Squares Konsep,Teknik Dan Aplikasi Mengunakan Program SmartPLS 3.0 (2nd ed.). Academia (Accelerating the World’s Research), 1–8
  9. Gunduz, M., & Almuajebh, M. (2020). Critical success factors for sustainable construction project management. Sustainability (Switzerland), 12(5). https://doi.org/10.3390/su12051990
  10. Hair, J. F., Sarstedt, M., Hopkins, L., & Kuppelwieser, V. G. (2014). Partial least squares structural equation modeling (PLS-SEM): An emerging tool in business research. European Business Review, 26(2), 106–121. https://doi.org/10.1108/EBR-10-2013-0128
  11. Hair Jr, J. F., Hult, G. T. M., Ringle, C. M., Sarstedt, M., Danks, N. P., & Ray, S. (2021). Partial least squares structural equation modeling (PLS-SEM) using R: A workbook. In Springer. https://link.springer.com/content/pdf/10.1007/978-3-030-80519-7.pdf
  12. Haryono, S. (2016). Metode SEM untuk Penelitian Manajemen dengan AMOS, LISREL, PLS. Badan Penerbit PT. Intermedia Personalia Utama, 450
  13. Husin, A. E. (2015). Model Aliansi Strategis Dalam Kemitraan Pemerintah dan Swasta Pada Mega Proyek Infrastruktur Berbasis Value Engineering Untuk Meningkatkan Nilai Kelayakan Proyek. 1–337
  14. Husin, A. E. (2019). Implementation Value Engineering In Diaphragm Wall at High Rise Building. 8(1), 16–23
  15. Husin, A. E., Setyawan, T. L., Meidiyanto, H., Kussumardianadewi, B. D., & Eddy Husin, M. K. (2019). Key success factors implementing BIM based quantity take-off in fit-out office work using relative importance index. International Journal of Engineering and Advanced Technology, 8(6), 986–990. https://doi.org/10.35940/ijeat.F82650.88619
  16. Hwang, B.-G., Zhu, L., Wang, Y., & Cheong, X. (2017). Green Building Construction Projects in Singapore. Project Management Journal, 48(4), 67–79
  17. Hwang, B. G., Shan, M., & Tan, E. K. (2016). Investigating reworks in green building construction projects: Magnitude, influential factors, and solutions. International Journal of Environmental Research, 10(4), 499–510
  18. Imron, A., & Husin, A. E. (2022). Value Engineering and Lifecycle Cost Analysis to Improve Cost Performance in Green Hospital Project Value engineering and lifecycle cost analysis to improve cost performance in green hospital project. December 2021. https://doi.org/10.24425/ace.2021.138514
  19. Jonathan, G., & Anondho, B. (2018). Perbandingan Antara Pls Sem Dan Analisis Faktor Untuk Identifikasi Faktor Pengaruh Eksternal Proyek. JMTS: Jurnal Mitra Teknik Sipil, 1(2), 123. https://doi.org/10.24912/jmts.v1i2.2668
  20. Karolina, T., Husin, A. E., & Susetyo, B. (2021). Analysis of Key Success Factors on the Improvement Façade Performance of High-Rise Hotels Based on Green Building and Value Engineering Using the RII …. Academia.Edu, 8(February), 569–577. https://www.academia.edu/download/65886310/IJRR071.pdf
  21. Kineber, A. F., Othman, I., Oke, A. E., Chileshe, N., & Buniya, M. K. (2020). Identifying and assessing sustainable value management implementation activities in developing countries: The case of Egypt. Sustainability (Switzerland), 12(21), 1–20. https://doi.org/10.3390/su12219143
  22. Knowledge, B. O. F. (2007). Value Standard. Save, June
  23. Nur, M., & Husin, A. E. (2022). Success Factors for Lean Six Sigma Implementation and Time Cost Trade off in High Rise Office Buildings to Improve Cost and Time Performance. Budapest International Research and Critics Institute-Journal (BIRCI-Journal), 5(3), 28296–28310
  24. Plebankiewicz, E. (2018). Model of Predicting Cost Overrun in Construction Projects. https://doi.org/10.3390/su10124387
  25. Rani, H. A. (2022). Konsep Value Engineering dalam Manajemen Proyek Konstruksi Construction Project Management View project Irrigation Project View project (Issue May). https://www.researchgate.net/publication/361254283
  26. Rauzana, A., Oktari, R. S., & Dharma, W. (2020). The Impact of Green Construction Factors on Project Cost in Banda Aceh. International Journal of Scientific Research and Engineering Development, 3(November). www.ijsred.com
  27. Robati, M., Oldfield, P., Nezhad, A. A., Carmichael, D. G., & Kuru, A. (2021). Carbon value engineering: A framework for integrating embodied carbon and cost reduction strategies in building design. Building and Environment, 192(October 2020), 107620. https://doi.org/10.1016/j.buildenv.2021.107620
  28. Sarstedt, M. (2019). The Great Facilitator. The Great Facilitator, March. https://doi.org/10.1007/978-3-030-06031-2
  29. Vu-Ngoc, H., Elawady, S. S., Mehyar, G. M., Abdelhamid, A. H., Mattar, O. M., Halhouli, O., Vuong, N. L., Mohd Ali, C. D., Hassan, U. H., Kien, N. D., Hirayama, K., & Huy, N. T. (2018). Quality of flow diagram in systematic review and/or meta-analysis. PLoS ONE, 13(6), 1–16. https://doi.org/10.1371/journal.pone.0195955
  30. Zhan, Z., Xu, W., Xu, L., Qi, X., Song, W., Wang, C., & Huang, Z. (2022). BIM-Based Green Hospital Building Performance Pre-Evaluation: A Case Study. Sustainability (Switzerland), 14(4), 1–21. https://doi.org/10.3390/su14042066

Last update:

No citation recorded.

Last update: 2024-11-21 08:45:37

No citation recorded.