skip to main content

EVALUASI BASIS TARIF DASAR JASA 3D PRINTING DENGAN SIMULASI ANYLOGIC

*Julian Anindito Widiatmoko  -  Universitas Tidar, Indonesia
Ratna Purwaningsing scopus  -  Universitas Diponegoro, Indonesia
Aries Susanty scopus  -  Universitas Diponegoro, Indonesia

Citation Format:
Abstract

Saat ini teknologi 3D Printing sedang sangat berkembang dengan biaya yang semakin terjangkau. Hal ini mendorong bermunculannya jasa cetak 3D di beberapa kota di Indonesia. Model bisnis yang digunakan adalah menerima model 3D dari pelanggan kemudian mencetaknya dengan 3D printer. Disebabkan oleh tidak terbatasnya variasi model 3D yang mungkin diterima, jasa 3D printing perlu menetapkan basis tarif  dasar yang dipakai. Terdapat dua pilihan basis tarif dasar yang merepresentasikan biaya langsung, yaitu basis material dan basis waktu cetak. Studi ini mengevaluasi performansi kedua basis tersebut menggunakan simulasi Anylogic dalam memaksimalkan pendapatan. Seratus model 3D digunakan untuk mengakomodir variasi pesanan. Estimasi jumlah material dan waktu cetak untuk masing-masing model didapat dari software slicer dan digunakan sebagai inputan simulasi. Dari hasil simulasi pada rentang waktu operasi satu tahun, didapatkan kesimpulan bahwa meskipun kedua basis tarif dasar menunjukkan keunggulan biaya langsung secara bergantian untuk model 3D yang  berbeda, basis material dapat memberikan jumlah pendapatan total yang lebih besar.

 

Rate basis evaluation of 3D printing service using Anylogic simulation. Nowadays, 3D printing technology has been vastly developed at an even more affordable cost. This fact encourages the growth of 3D print services in some Indonesian cities. The business model for this type of service is simple: receiving a 3D model from the customer and then realizing it using 3D printing. Since there are unlimited variations of 3D models that come in, 3D services providers need to determine their basic rate. Two options of rate basis represent direct cost of 3D printing operation, those are material basis and printing time basis. This article evaluates the performance of the two using Anylogic simulation in maximizing revenue. A hundred 3D models were utilized to accommodate variation in order. Material needs and printing time estimation of each model were determined using slicer software as input for the simulation. The result of one year simulation time shows that although both bases can give superiority on direct cost for different individual 3D models, the material basis rate was able to present greater operational income.

Keywords: 3D printing; rate basis; Anylogic; simulation

Fulltext View|Download
Keywords: 3D printing; basis tarif; Anylogic; simulation

Article Metrics:

  1. ay, S., Van Den Brink, H., Pineau, J., Prognon, P., & Martelli, N. (2020). Evaluation of 3D printing costs in surgery: a systematic review. International Journal of Technology Assessment in Health Care, 36(4), 349–355. https://doi.org/10.1017/S0266462320000331
  2. Sharma, M., Saraswat, P., & Joshi, D. (2018). Parametric Study on Printing Time and Cost of Component in 3D Printing. SKIT Research Journal VOLUME, 8, 45
  3. Song, J. S., & Zhang, Y. (2019). Stock or Print? Impact of 3-D Printing on Spare Parts Logistics. Https://Doi.Org/10.1287/Mnsc.2019.3409, 66(9), 3860–3878.
  4. Sunarto, G., Katmini, K., & Dian Eliana, A. (2023). Efektifitas Biaya Penggunaan Teknologi Pencetakan 3D (Industri 4.0) pada Alat Bantu Ortotik Prostetik. Jurnal Penelitian Kesehatan “SUARA FORIKES” (Journal of Health Research “Forikes Voice”), 14(1), 17–26. https://doi.org/10.33846/SF14104
  5. Widiatmoko, J. A. (2023). 3D printing untuk usaha mikro dalam perspektif 5M. MUSTEK ANIM HA, 12(01), 1–14. https://doi.org/10.35724/MUSTEK.V12I01.5211
  6. Wu, P., Wang, J., & Wang, X. (2016). A critical review of the use of 3-D printing in the construction industry. Automation in Construction, 68, 21–31. https://doi.org/10.1016/J.AUTCON.2016.04.005
  7. Xiao, Y. Q., & Kan, C. W. (2022). Review on Development and Application of 3D-Printing Technology in Textile and Fashion Design. Coatings 2022, Vol. 12, Page 267, 12(2), 267. https://doi.org/10.3390/COATINGS12020267

Last update:

No citation recorded.

Last update: 2024-11-14 11:21:55

No citation recorded.