DOI: https://doi.org/10.14710/kapal.v20i3.58338

Enhancing Propulsion Performance for Container Ships through Propeller Adjustments: A Case Study MV. Kendhaga Nusantara 6

*Zulfaidah Ariany orcid scopus  -  Department Technology of Industry, Sekolah Vokasi, Universitas Diponegoro, Indonesia
Budi Santoso  -  Department of Naval Architecture Engineering Polytechnic of Bengkalis, Riau, Indonesia, Indonesia
Suharto Suharto  -  Department Technology of Industry, Sekolah Vokasi, Universitas Diponegoro, Indonesia
Sarwoko Sarwoko  -  Department Technology of Industry, Sekolah Vokasi, Universitas Diponegoro, Indonesia
Open Access Copyright (c) 2023 Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan
Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Citation Format:
Abstract

The ship's service speed performance is prioritized in a ship's propulsion system planning. Motor Vessel. KENDHANGA NUSANTARA 6 is a type of containerized cargo ship built to support the sea toll program in the Tanjung Emas port area, Semarang. The less significant propeller pitch affects the ship's ability to move. The experiment was carried out by operating the machine with maximum capability. The phenomenon of the geometric shape of the propeller provides information on the rotation results and the distribution of the working forces. The structure of the propeller design describes the ability and level of effectiveness when the propeller is submerged in water. The results of this study show that the optimization value of the right propeller pitch is 0.6%, the pitch width is 1660 mm, and the optimization value of the left propeller pitch is 1.2% with a pitch width of 1670 mm; this value can make the ship's rate speed during the docking trial 12.3 knots, following the planned speed.

Note: This article has supplementary file(s).

Fulltext View|Download |  common.other
Enhancing Propulsion Performance for Container Ships through Propeller Adjustments: A Case Study MV. Kendhaga Nusantara 6
Subject
Type Other
  Download (2MB)    Indexing metadata
 common.other
Enhancing Propulsion Performance for Container Ships through Propeller Adjustments: A Case Study MV. Kendhaga Nusantara 6
Subject
Type Other
  Download (92KB)    Indexing metadata
Keywords: Optimization; Propulsion; Container Ship; Performance Ship.

Article Metrics:

Article Info
Section: Research Articles
Language : EN
Recent articles
Enhancing Propulsion Performance for Container Ships through Propeller Adjustments: A Case Study MV. Kendhaga Nusantara 6 Performance Study of a Humpback Whale Fluke Turbine on Foil Shape Variation Based on Double Multiple Streamtube Model Numerical Analysis of The Effects of Propeller High Thrust Distribution on Propulsion System Performance More recent articles
Most cited articles
PEMANFAATAN TENAGA ANGIN DAN SURYA SEBAGAI ALAT PEMBANGKIT LISTRIK PADA BAGAN PERAHU Karakteristik Geometri dan Pengaruhnya Terhadap Stabilitas Kapal Ferry Ro-Ro Indonesia KAJIAN PENGGUNAAN PROGRAM APLIKASI DESAIN KAPAL TRADISIONAL PADA GALANGAN KAPAL KAYU DI KABUPATEN BATANG HIGH SPEED SHIP TOTAL RESISTANCE CALCULATION (AN EMPIRICAL STUDY) ANALISA PENGARUH BENTUK LAMBUNG AXE BOW PADA KAPAL HIGH SPEED CRAFT TERHADAP HAMBATAN TOTAL More cited articles
  1. I. Kobougias, E. Tatakis, and J. Prousalidis, “PV systems installed in marine vessels: Technologies and specifications,” Adv. Power Electron., vol. 2013, no. i, 2013, doi: 10.1155/2013/831560
  2. I. B. P. Sukadana and I. W. Suastawa, “Rancangan Propeller Optimum Kapal Ikan Tradisional,” 2009
  3. D. Mulyana, J. Jamari, and R. Ismail, “Investigasi Efisiensi Propeler Kapal Ikan Tradisional,” Rotasi, vol. 16, no. 4, p. 28, 2014, doi: 10.14710/rotasi.16.4.28-34
  4. G. S. Spagnolo, D. Papalillo, A. Martocchia, and G. Makary, “Solar-Electric Boat,” J. Transp. Technol., vol. 02, no. 02, pp. 144–149, 2012, doi: 10.4236/jtts.2012.22015
  5. K. Mahmud, S. Morsalin, and M. I. Khan, “Design and Fabrication of an Automated Solar Boat,” Int. J. Adv. Sci. Technol., vol. 64, pp. 31–42, 2014, doi: 10.14257/ijast.2014.64.04
  6. I. K. A. P. Utama, P. I. Santosa, R. M. Chao, and A. Nasiruddin, “New concept of solar- Powered catamaran fishing vessel,” Proc. 7th Int. Conf. Asian Pacific Coasts, APAC 2013, pp. 903–909, 2020
  7. A. Nasirudin, R. M. Chao, and I. K. A. P. Utama, “Solar powered boat design optimization,” Procedia Eng., vol. 194, pp. 260–267, 2017, doi: 10.1016/j.proeng.2017.08.144
  8. N. V. ali and S. N. njan, “Optimized Electric Propulsion System Modeling and Simulation with Low Voltage DC Hybrid Power Systems,” Int. J. Adv. Res. Electr. Electron. Instrum. Eng., vol. 03, no. 12, pp. 13602–13611, 2014, doi: 10.15662/ijareeie.2014.0312014
  9. H. Lan, S. Wen, Y. Y. Hong, D. C. Yu, and L. Zhang, “Optimal sizing of hybrid PV/diesel/battery in ship power system,” Appl. Energy, vol. 158, pp. 26–34, 2015, doi: 10.1016/j.apenergy.2015.08.031
  10. P. I. Santosa and I. K. A. P. Utama, “An Investigation into Hybrid Catamaran Fishing Vessel: Combination of Diesel Engine, Sails and Solar Panels,” IPTEK J. Proc. Ser., vol. 0, no. 1, pp. 36–41, 2014, doi: 10.12962/j23546026.y2014i1.383
  11. K. J. Lee, D. Shin, D. W. Yoo, H. K. Choi, and H. J. Kim, “Hybrid photovoltaic/diesel green ship operating in standalone and grid-connected mode - Experimental investigation,” Energy, vol. 49, no. 1, pp. 475–483, 2013, doi: 10.1016/j.energy.2012.11.004
  12. A. F. Molland, S. R. Turnock, and D. A. Hudson, Ship resistance and propulsion: Practical estimation of ship propulsive power, vol. 9780521760522. 2011. doi: 10.1017/CBO9780511974113
  13. M. Ridwan, “Parameter Design Propeller Kapal,” Kapal, vol. 5, no. 3, pp. 206–211, 2012

Last update:

No citation recorded.

Last update: 2024-12-25 16:42:49

No citation recorded.