DOI: https://doi.org/10.14710/kapal.v21i1.60839

Analysis of Ambulance Ship Design in Karimunjawa Waters reviewed by Stability and Seakeeping

*Gusma Hamdana Putra orcid  -  Ship Building Engineering Department, Shipbuilding Institute of Polytechnic Surabaya, Indonesia
Rachmad Tri Soelistijono  -  Ship Building Engineering Department, Shipbuilding Institute of Polytechnic Surabaya, Indonesia
Prasastya Dhohir Setyawan  -  Ship Building Engineering Department, Shipbuilding Institute of Polytechnic Surabaya, Indonesia
Open Access Copyright (c) 2024 Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan
Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Citation Format:
Abstract
The inadequate health facilities in the Karimunjawa Islands region still need attention. In particular, patients who have to be referred to the hospital still have problems in terms of transportation. This research presents the results of simulations of ambulance ship designs adapted to Karimunjawa conditions. A ship with a length of 8 m, width of 2.2 m, height of 1.1 m, and draft height of 0.37 m is analyzed regarding stability and seakeeping referring to IMO HSC Code 2000 Annex 8. Several parameters are determined, such as load, speed, significant wave height, and direction. The results in terms of stability show that loads of 100%, 50%, and 25% are still acceptable. Then, the results from seakeeping show that at a speed of 23 knots and significant wave height, especially in the diagonal wave direction of the ship, it is not acceptable
Fulltext View|Download

Article Metrics:

Article Info
Section: Research Articles
Language : EN
Recent articles
CFD Analysis of Interference Factor in Hydrofoil-Supported Catamarans (HYSUCAT) Analysis of Ambulance Ship Design in Karimunjawa Waters reviewed by Stability and Seakeeping Experimental Investigation of Oxy-Hydrogen Injection in Natural Gas/Diesel Dual-Fuel Engine: Performance and Emission Analysis under Low Load Operation The necessity of implementing AI for enhancing safety in the Indonesian passenger shipping fleet Management Logistics Maritime: A Literature Review Systematic Considerations for a Ballast Water Treatment System (BWTS) Retrofits: A Review More recent articles
Most cited articles
PENGARUH ANTI-SLAMMING BULBOUS BOW TERHADAP GERAKAN SLAMMING PADA KAPAL PERINTIS 200 DWT ANALISIS KEKUATAN SAMBUNGAN LAS SMAW ( SHIELDED METAL ARC WELDING ) PADA MARINE PLATE ST 42 AKIBAT FAKTOR CACAT POROSITAS DAN INCOMPLETE PENETRATION Karakteristik Geometri dan Pengaruhnya Terhadap Stabilitas Kapal Ferry Ro-Ro Indonesia PEMANFAATAN TENAGA ANGIN DAN SURYA SEBAGAI ALAT PEMBANGKIT LISTRIK PADA BAGAN PERAHU PENGARUH BENTUK LAMBUNG KAPAL TERHADAP POLA ALIRAN DAN POWERING PADA KAPAL PERAIRAN SUNGAI DAN LAUT More cited articles
  1. Rosalina, “Desain Ambulans Air Modern Untuk Wilayah Kepulauan,” Prosiding Serenade, vol. 1, pp. 1–7, 2021
  2. Badan Pusat Statistik Kabupaten Jepara, “Kabupaten Jepara dalam Angka,” 2022
  3. A. Gunawan, Purwanto, and A. Satriadi, “Analisis Spektrum Gelombang Berarah di Perairan Karimunjawa Kabupaten Jepara,” JURNAL OSEANOGRAFI, vol. 6, no. 1, pp. 1–9, 2017, [Online]
  4. B. D. Alfanda, E. Julianto, M. A. Aryatama, K. D. Wulandari, and W. E. Primaningtyas, “Variasi Model Pembebanan memberikan pengaruh signifikan terhadap Stabilitas Kapal Ikan Tradisional 3 GT,” Jurnal Inovtek Polbeng, vol. 13, no. 1, 2023
  5. A. Fadillah, S. Manullang, and R. Irvana, “Stabilitas, Hambatan Dan Olah Gerak Kapal Ikan Multi Purpose Net/Line Hauler 20 Gt Berdasarkan Kajian Ukuran Dan Bentuk Kasko Kapal,” Marine Fisheries: Journal of Marine Fisheries Technology and Management, vol. 10, no. 2, pp. 117–128, 2019
  6. A. Prabowo, E. Martono, T. Muttaqie, T. Tuswan, and D. Bae, “EFFECT OF HULL DESIGN VARIATIONS ON THE RESISTANCE PROFILE AND WAVE PATTERN: A CASE STUDY OF THE PATROL BOAT VESSEL,” Journal of Engineering Science and Technology, vol. 17, pp. 106–126, Sep. 2022
  7. S. C. Misra, Design Principles of Ships and Marine Structures. Boca Raton: CRC Press, 2016
  8. M. Iqbal and G. Rindo, “OPTIMASI BENTUK DEMIHULL KAPAL KATAMARAN UNTUK MENINGKATKAN KUALITAS SEAKEEPING,” KAPAL, vol. 12, pp. 19–24, 2015
  9. E. Djatmiko, Perilaku dan Operabilitas Bangunan Laut di Atas Gelombang Acak. 2019
  10. I. P. S. Asmara, Adianto, M. A. Mustaghfirin, B. D. Qowima, Sumardiono, and G. Suhardjito, “An Evaluation on Operability and Maneuverability of Small Coastal Fishing Vessel Using Simulation and AIS Data,” in 2018 International Conference on Applied Science and Technology (iCAST), 2018, pp. 186–189
  11. I. P. S. Asmara, Sumardiono, and M. Adam, “Seakeeping and resistance analysis of 1200 GT passenger ship fitted with NACA 4412 stern foil using CFD method,” IOP Conf Ser Mater Sci Eng, vol. 1175, no. 1, p. 12002, Aug. 2021
  12. Romadhoni, B. Santoso, and M. Ikhsan, “Resistance and Intact Stability Calculation of Hull Form Tourism Boat Siak River for Passenger Safety,” in Proceedings of the International Conference on Innovation in Science and Technology (ICIST 2020), Atlantis Press, 2021, pp. 222–227

Last update:

No citation recorded.

Last update: 2024-04-25 11:56:30

No citation recorded.