DOI: https://doi.org/10.14710/jksa.23.7.249-254

Synthesis and Characterization of Trimethylchlorosilane-Modified Silica Xerogel

Department of Chemistry, Faculty of Mathematics and Natural Sciences, Tanjungpura University, Indonesia

Received: 3 Apr 2020; Revised: 12 Jun 2020; Accepted: 27 Jun 2020; Available online: 20 Jul 2020; Published: 31 Jul 2020.
Open Access Copyright 2020 Jurnal Kimia Sains dan Aplikasi under http://creativecommons.org/licenses/by-sa/4.0.

Citation Format:
Cover Image
Abstract
Modification of silica xerogel with TMCS (trimethylchlorosilane) reagent has been carried out to improve the hydrophobicity of silica xerogel. Silica xerogel was synthesized based on the sol-gel method using sodium silicate as a precursor, and citric acid as a catalyst, with a mole ratio of sodium silicate and citric acid, was 0.172: 0.004. The sol-gel process was carried out through several stages, i.e., hydrolysis and condensation of sodium silicate to form sol, gelation (sol transition to gel), aging, and drying. Surface modification was performed by studying the effect of TMCS: methanol: petroleum benzine volume ratio of 0.5:1:1, 1:1:1, 1.5:1:1, 2:1:1, and 2.5:1:1 on the characteristics of silica xerogel synthesized. FTIR, SEM, and GSA characterized the synthesized results. The results of FTIR characterization on silica xerogel with volume ratios of 2:1:1 and 2.5:1:1 indicate the presence of the Si‑C group absorption at a wavenumber of 848.68 cm-1 which shows that the formation of silyl groups on the modified silica xerogel surfaces occurs at a TMCS: methanol: petroleum benzine ratio of 2:1:1 and 2.5:1:1. SEM results indicate that the silica xerogels produced are porous. Meanwhile, the GSA analysis results show that the pore size distributions are in the mesoporous region with an average pore radius of 8-13 nm. The greater the volume of TMCS used, the higher the surface area, and the resulting xerogel’s hydrophobicity. Based on the contact angle and seeped time test, the highest hydrophobicity is produced by the material synthesized at a TMCS: methanol: PB volume ratio of 2.5:1:1 with a contact angle of 116.346°.
Fulltext View|Download
Keywords: synthesis; TMCS-modified silica xerogel; hydrophobic
Funding: DRPM Dikti

Article Metrics:

Article Info
Section: Research Articles
Language : EN
Recent articles
Cytotoxicity of the Most Active Fraction of the Seeds of Swietenia macrophylla using Human Breast Cancer MCF-7 Cells Synthesis and Characterization of Benzodithiophene (BDT) Quinoid Compounds as a Potential Compound for n-Type Organic Thin-Film Transistors (OTFT) Characteristics of Raw-Starch Degrading Amylase Bacteria from Natar Hot Spring Lampung Direct Investigation of Synthesis of Gold Nanoparticles Using Polyscias scutellaria Leaf Extract in the Hexane-Water System Using the Centrifugal Liquid Membrane-Spectrophotometry Method More recent articles
Most cited articles
Lempung Terpilar Silika untuk Penghilangan Fenol dalam Air Innovation of Carbon from Pectin Templated in Fabrication of Interlayer-free Silica-Pectin Membrane Antioxidant Activity of Daemonorops draco Resin Studi Filogeni dan Uji Potensi Bioremediasi serta Enzim Termostabil Ekstraseluler Isolat Geobacillus sp. dari Sumber Air Panas Gedong Songo Pra-Standarisasi: Produksi dan Analisis Minyak Virgin Coconut Oil (VCO) More cited articles
  1. E. F. Vansant, P. Van Der Voort, K. C. Vrancken, Characterization and Chemical Modification of the Silica Surface, Elsevier Science, 1995
  2. C. Jeffrey Brinker, George W. Scherer, Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing, Elsevier Science, 2013
  3. Ulrich Schubert, Nicola Hüsing, Synthesis of Inorganic Materials, 4th ed., Wiley-VCH, 2019
  4. Abhijit A. Pisal, A. Venkateswara Rao, Comparative studies on the physical properties of TEOS, TMOS and Na2SiO3 based silica aerogels by ambient pressure drying method, Journal of Porous Materials, 23, 6, (2016), 1547-1556 https://doi.org/10.1007/s10934-016-0215-y
  5. A. Venkateswara Rao, G. M. Pajonk, Uzma K. H. Bangi, A. Parvathy Rao, Matthias M. Koebel, Sodium Silicate Based Aerogels via Ambient Pressure Drying, in: M.A. Aegerter, N. Leventis, M.M. Koebel (Eds.) Aerogels Handbook, Springer New York, New York, NY, 2011 https://doi.org/10.1007/978-1-4419-7589-8_5
  6. Petar Ivanov, Bogdan Bogdanov, Yancho Hristov, Synthesis of hydrophilic and hydrophobic xerogel, Journal of Chemical Technology and Metallurgy, 52, 3, (2017), 457-462
  7. Ann M. Anderson, Mary K. Carroll, Hydrophobic Silica Aerogels: Review of Synthesis, Properties and Applications, in: M.A. Aegerter, N. Leventis, M.M. Koebel (Eds.) Aerogels Handbook, Springer New York, New York, NY, 2011 https://doi.org/10.1007/978-1-4419-7589-8_3
  8. D. B. Mahadik, A. Venkateswara Rao, A. Parvathy Rao, P. B. Wagh, S. V. Ingale, Satish C. Gupta, Effect of concentration of trimethylchlorosilane (TMCS) and hexamethyldisilazane (HMDZ) silylating agents on surface free energy of silica aerogels, Journal of Colloid and Interface Science, 356, 1, (2011), 298-302 https://doi.org/10.1016/j.jcis.2010.12.088
  9. Uzma K. H. Bangi, A. Venkateswara Rao, A. Parvathy Rao, A new route for preparation of sodium-silicate-based hydrophobic silica aerogels via ambient-pressure drying, Science and Technology of Advanced Materials, 9, 3, (2008), 035006 https://doi.org/10.1088/1468-6996/9/3/035006
  10. Poonam M. Shewale, A. Venkateswara Rao, A. Parvathy Rao, Effect of different trimethyl silylating agents on the hydrophobic and physical properties of silica aerogels, Applied Surface Science, 254, 21, (2008), 6902-6907 https://doi.org/10.1016/j.apsusc.2008.04.109
  11. Donald L. Pavia, Gary M. Lampman, George S. Kriz, James A. Vyvyan, Introduction to Spectroscopy, 4th ed., Cengage Learning, 2008
  12. Bogdan Bogdanov, Petar Ivanov, Yancho Hristov, R. Raykova, Synthesis of Hydrophilic and Hydrophobic Xerogel, Science & Technologies, 3, 4, (2013), 16-20
  13. K. S. W. Sing, D. H. Everett, R. A. W. Haul, L. Moscou, R. A. Pierotti, J. Rouquerol, T. Siemieniewska, Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984), Pure and Applied Chemistry, 57, 4, (1985), 603-619 https://doi.org/10.1351/pac198557040603
  14. Lindy Heath, Lifan Zhu, Wim Thielemans, Chitin Nanowhisker Aerogels, ChemSusChem, 6, 3, (2013), 537-544 https://doi.org/10.1002/cssc.201200717
  15. Vijay K. Tomer, Sunita Devi, Ritu Malik, Surender Duhan, Mesoporous Materials and Their Nanocomposites, in: V. P.M., M.J.M. Morlanes (Eds.) Nanomaterials and Nanocomposites, Wiley‐VCH Verlag GmbH & Co., 2016 https://doi.org/10.1002/9783527683772.ch7
  16. Pradip B. Sarawade, Jong-Kil Kim, Askwar Hilonga, Dang Viet Quang, Hee Taik Kim, Synthesis of hydrophilic and hydrophobic xerogels with superior properties using sodium silicate, Microporous and Mesoporous Materials, 139, 1, (2011), 138-147 https://doi.org/10.1016/j.micromeso.2010.10.030
  17. Guo Li, Jiang Yue, Chenhao Guo, Yongsheng Ji, Influences of modified nanoparticles on hydrophobicity of concrete with organic film coating, Construction and Building Materials, 169, (2018), 1-7 https://doi.org/10.1016/j.conbuildmat.2018.02.191
  18. J. Anthony von Fraunhofer, Adhesion and Cohesion, International Journal of Dentistry, 2012, (2012), 951324 https://doi.org/10.1155/2012/951324

Last update:

No citation recorded.

Last update: 2024-11-16 04:14:22

No citation recorded.