1Department of Chemistry, Faculty of Science and Mathematics, IPB University, Bogor 16680, Indonesia
2Department of Chemistry, Faculty of Mathematics and Natural Sciences, IPB University, Bogor 16680, Indonesia
BibTex Citation Data :
@article{JKSA57867, author = {Nor Pana Yupa and Henny Purwaningsih and Tetty Kemala}, title = {Synthesis and Characterization of Corn Husk (Zea Mays L.) Cellulose Using Microwave-Assisted Extraction (MAE)}, journal = {Jurnal Kimia Sains dan Aplikasi}, volume = {26}, number = {7}, year = {2023}, keywords = {Cellulose; Corn husk; Microwave-assisted Extraction (MAE)}, abstract = { This research focuses on synthesizing cellulose from corn husks using microwave-assisted extraction (MAE), which aims to produce cellulose from corn husks through liquefaction, delignification, and bleaching processes. The total time required is only 14 minutes, thus shortening the process time. This study used three power variations: 450 W, 600 W, and 800 W. The results showed that the optimum conditions occurred at 800 W power. Hence, the higher the power caused the high cellulose content obtained, which amounted to 75.23% and decreased the lignin value to 15.78%, along with the increase in microwave power. FTIR analysis also confirmed the cellulose results obtained and indicated that the lignin groups were weakened or lost. Furthermore, morphological analysis of cellulose fibers by SEM showed that the surface of cellulose fibers was rough, oval, and irregular due to cracks caused by erosion. Then, the result of cellulose crystallinity using XRD was 45.8%. Compared to conventional methods, microwave-assisted cellulose synthesis exhibits better and more promising potential. This is because microwave radiation can be used to improve process time efficiency and achieve higher yields. Moreover, the proposed method is easier, faster, and straightforward. }, issn = {2597-9914}, pages = {268--275} doi = {10.14710/jksa.26.7.268-275}, url = {https://ejournal.undip.ac.id/index.php/ksa/article/view/57867} }
Refworks Citation Data :
This research focuses on synthesizing cellulose from corn husks using microwave-assisted extraction (MAE), which aims to produce cellulose from corn husks through liquefaction, delignification, and bleaching processes. The total time required is only 14 minutes, thus shortening the process time. This study used three power variations: 450 W, 600 W, and 800 W. The results showed that the optimum conditions occurred at 800 W power. Hence, the higher the power caused the high cellulose content obtained, which amounted to 75.23% and decreased the lignin value to 15.78%, along with the increase in microwave power. FTIR analysis also confirmed the cellulose results obtained and indicated that the lignin groups were weakened or lost. Furthermore, morphological analysis of cellulose fibers by SEM showed that the surface of cellulose fibers was rough, oval, and irregular due to cracks caused by erosion. Then, the result of cellulose crystallinity using XRD was 45.8%. Compared to conventional methods, microwave-assisted cellulose synthesis exhibits better and more promising potential. This is because microwave radiation can be used to improve process time efficiency and achieve higher yields. Moreover, the proposed method is easier, faster, and straightforward.
Article Metrics:
Last update:
Processing and biomedical applications of sustainable rice straw polysaccharide biomaterials: Waste to wealth
Low-Cost Biosorbents Derived from Corn Husks for the Exclusion of Fe(II) and Cr(VI) Ions Undertaken Aqueous Media: Application for Wastewater Treatment
Last update: 2026-09-09 16:47:16
As an article writer, the author has the right to use their article for various purposes, including use by institutions that employ the author or institutions that provide funding for the research. These author rights are granted without special permission.
Authors who publish a paper in JKSA have broad rights to use their work for teaching and scientific purposes without the need to request permission, including: (i) teaching in the author's class or institution; (ii) presenting the work at meetings or conferences and distributing copies to participants; (iii) using the work in training conducted by the author or the author's institution; (iv) distributing copies to colleagues for research purposes; (v) using the work in the compilation of subsequent works by the author; (vi) including the work in a thesis or dissertation; (vii) reusing part of the article in another work, with appropriate citation; (viii) preparing derivative works, with appropriate citation; and (ix) voluntarily posting the work on open websites operated by the author or the author's institution for scientific purposes, in accordance with the CC BY-SA License.
Authors and readers may copy and redistribute the material in any medium or format, and may remix, transform, and build upon the material for any purpose, provided that they give appropriate credit by citing the article or its content, provide a link to the license, and indicate if changes were made.
The authors submitting a manuscript do so on the understanding that, if accepted for publication, the copyright of the article shall be assigned to Jurnal Kimia Sains dan Aplikasi (JKSA). Copyright encompasses the rights to reproduce and distribute the article in all forms and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Reproducing any part of this journal, storing it in a database, or transmitting it in any form or medium is permitted without written permission from JKSA. However, the original source must be properly cited in accordance with academic conventions.
JKSA, the Chemistry Department of Diponegoro University, and the Editor make every effort to ensure that no inaccurate, false, or misleading data, opinions, or statements are published in JKSA. However, the content of each article is the sole and exclusive responsibility of its authors.
The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form - Indonesian] [Copyright Transfer Form - English]. The copyright form should bear the authors' original signatures and be sent to the Editor as a printed document, a scanned document sent via email, or by fax.
Prof. Adi Darmawan, Ph.D (Editor in Chief)
Editor in chief of Jurnal Kimia Sains dan Aplikasi (JKSA)
Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University
Visitor: View My Stats
Jurnal Kimia Sains dan Aplikasi is indexed in:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.