skip to main content

Impact of Modifying Filler into Porous on Hydrophobicity Behaviour of The Silica-HDPE Composite

1Department of Chemistry, Faculty of Mathematics and Natural Science, Bogor Agricultural University, Bogor, Indonesia

2Integrated Laboratory, Bogor Agricultural University, Bogor, Indonesia

Received: 1 Jun 2024; Revised: 14 Mar 2025; Accepted: 8 Apr 2025; Published: 31 May 2025.
Open Access Copyright 2025 Jurnal Kimia Sains dan Aplikasi under http://creativecommons.org/licenses/by-sa/4.0.

Citation Format:
Cover Image
Abstract
Even though the approach is relatively simple and does not require additional treatment, the porous filler method has not been widely utilized to boost the composite’s hydrophobicity. Therefore, this study wants to show that silica’s porosity as a filler material affects the surface roughness and hydrophobicity of its composite (in this case, silica-HDPE). Pore formation in silica uses the soft-template method with Tween-80 as the mould. The amount of surfactant was varied by 0, 5, and 10 g. The particles are then physically composited into the HDPE matrix. Surface characterization of silica particles analyzed by Brunauer-Emmett-Teller (BET) shows enhancement in particle porosity as the amount of surfactant added is increased. When it is inserted into HDPE, the silica particles with the highest porosity have the greatest surface roughness. It is confirmed by the wavy surface texture of this composite when it is characterized using an Atomic Force Microscope (AFM). These results are accompanied by a significant enhancement in the contact angle value at each concentration. From the contact angle and AFM data, porous silica has the role of surface texture provider in raising its roughness. It affects the improvement of the hydrophobicity according to the Cassie-Baxter equation, which states that the more air fraction formed on a surface, the higher the contact angle obtained.
Fulltext View|Download
Keywords: Cassie-Baxter equation; hydrophobicity; porous filler; silica-HDPE composite; surface roughness
Funding: Ministry of Education, Culture, Research, and Technology under contract 3866/IT33.L1/PT.01.03/P/B/2022

Article Metrics:

  1. Jeya Jeevahan, M. Chandrasekaran, G. Britto Joseph, R. B. Durairaj, G. Mageshwaran, Superhydrophobic surfaces: a review on fundamentals, applications, and challenges, Journal of Coatings Technology and Research, 15, 2, (2018), 231-250 https://doi.org/10.1007/s11998-017-0011-x
  2. Yun-Yun Quan, Zhong Chen, Yuekun Lai, Zu-Sheng Huang, Huaqiong Li, Recent advances in fabricating durable superhydrophobic surfaces: a review in the aspects of structures and materials, Materials Chemistry Frontiers, 5, 4, (2021), 1655-1682 https://doi.org/10.1039/d0qm00485e
  3. Divya Kumar, Lin Li, Zhong Chen, Mechanically robust polyvinylidene fluoride (PVDF) based superhydrophobic coatings for self-cleaning applications, Progress in Organic Coatings, 101, (2016), 385-390 https://doi.org/10.1016/j.porgcoat.2016.09.003
  4. Bo Wang, Hongtao Liu, Chao Chen, Huaqiu Zhang, Chunchun Du, Lizao Zhou, Facile preparation of TPE/SiO2 flexible superhydrophobic composite film with acid corrosion resistance and stretchable recyclability, Materials Today Communications, 25, (2020), 101318 https://doi.org/10.1016/j.mtcomm.2020.101318
  5. Nusret Celik, Furkan Sahin, Mahmut Ruzi, Mehmet Yay, Ekrem Unal, M. Serdar Onses, Blood repellent superhydrophobic surfaces constructed from nanoparticle-free and biocompatible materials, Colloids and Surfaces B: Biointerfaces, 205, (2021), 111864 https://doi.org/10.1016/j.colsurfb.2021.111864
  6. Tianxue Zhu, Yan Cheng, Jianying Huang, Jiaqing Xiong, Mingzheng Ge, Jiajun Mao, Zekun Liu, Xiuli Dong, Zhong Chen, Yuekun Lai, A transparent superhydrophobic coating with mechanochemical robustness for anti-icing, photocatalysis and self-cleaning, Chemical Engineering Journal, 399, (2020), 125746 https://doi.org/10.1016/j.cej.2020.125746
  7. Zhanglian Xu, Koji Miyazaki, Teruo Hori, Fabrication of polydopamine-coated superhydrophobic fabrics for oil/water separation and self-cleaning, Applied Surface Science, 370, (2016), 243-251 https://doi.org/10.1016/j.apsusc.2016.02.135
  8. Zhenzhen Lu, Lijie Xu, Yang He, Jianting Zhou, One-step facile route to fabricate functionalized nano-silica and silicone sealant based transparent superhydrophobic coating, Thin Solid Films, 692, (2019), 137560 https://doi.org/10.1016/j.tsf.2019.137560
  9. Ahmed Bahgat Radwan, Aboubakr M. Abdullah, Adel M. A. Mohamed, Mariam A. Al-Maadeed, New Electrospun Polystyrene/Al2O3 Nanocomposite Superhydrophobic Coatings; Synthesis, Characterization, and Application, Coatings, 8, 2, (2018), 65 https://doi.org/10.3390/coatings8020065
  10. Yuan Liao, Chun-Heng Loh, Rong Wang, Anthony G. Fane, Electrospun Superhydrophobic Membranes with Unique Structures for Membrane Distillation, ACS Applied Materials & Interfaces, 6, 18, (2014), 16035-16048 https://doi.org/10.1021/am503968n
  11. Ramón Jiménez-Robles, Marta Izquierdo, Vicente Martínez-Soria, Laura Martí, Alicia Monleón, José David Badia, Stability of Superhydrophobicity and Structure of PVDF Membranes Treated by Vacuum Oxygen Plasma and Organofluorosilanisation, Membranes, 13, 3, (2023), 314 https://doi.org/10.3390/membranes13030314
  12. M. Satapathy, P. Varshney, D. Nanda, S. S. Mohapatra, A. Behera, A. Kumar, Fabrication of durable porous and non-porous superhydrophobic LLDPE/SiO2 nanoparticles coatings with excellent self-cleaning property, Surface and Coatings Technology, 341, (2018), 31-39 https://doi.org/10.1016/j.surfcoat.2017.07.025
  13. Yuwei Zhu, Lei Pei, Jaweria Ambreen, Chuanxin He, To Ngai, Facile Preparation of a Fluorine-Free, Robust, Superhydrophobic Coating through Dip Coating Combined with Non-Solvent Induced Phase Separation (Dip-Coating-NIPS) Method, Macromolecular Chemistry and Physics, 221, 7, (2020), 2000023 https://doi.org/10.1002/macp.202000023
  14. Lingqi Zhong, Xiao Gong, Phase separation-induced superhydrophobic polylactic acid films, Soft Matter, 15, 46, (2019), 9500-9506 https://doi.org/10.1039/c9sm01624d
  15. Gokul Raja Thangaiyanadar Suyambulingam, Kadarkaraithangam Jeyasubramanian, Vimal Kumar Mariappan, Pandiyarasan Veluswamy, Hiroya Ikeda, Karthikeyan Krishnamoorthy, Excellent floating and load bearing properties of superhydrophobic ZnO/copper stearate nanocoating, Chemical Engineering Journal, 320, (2017), 468-477 https://doi.org/10.1016/j.cej.2017.03.052
  16. Peng Wang, Bo Sun, Tao Yao, Mingji Chen, Xiaoliang Fan, Huilong Han, Lin Li, Chao Wang, A novel dissolution and resolidification method for preparing robust superhydrophobic polystyrene/silica composite, Chemical Engineering Journal, 326, (2017), 1066-1073 https://doi.org/10.1016/j.cej.2017.06.058
  17. Popat G. Pawar, Ruimin Xing, Rahul C. Kambale, A. Madhan Kumar, Shanhu Liu, Sanjay S. Latthe, Polystyrene assisted superhydrophobic silica coatings with surface protection and self-cleaning approach, Progress in Organic Coatings, 105, (2017), 235-244 https://doi.org/10.1016/j.porgcoat.2017.01.016
  18. Norbert J. Janowicz, Hangtong Li, Frances L. Heale, Ivan P. Parkin, Ioannis Papakonstantinou, Manish K. Tiwari, Claire J. Carmalt, Fluorine-Free Transparent Superhydrophobic Nanocomposite Coatings from Mesoporous Silica, Langmuir, 36, 45, (2020), 13426-13438 https://doi.org/10.1021/acs.langmuir.0c01767
  19. Samira Jafari, Hossein Derakhshankhah, Loghman Alaei, Ali Fattahi, Behrang Shiri Varnamkhasti, Ali Akbar Saboury, Mesoporous silica nanoparticles for therapeutic/diagnostic applications, Biomedicine & Pharmacotherapy, 109, (2019), 1100-1111 https://doi.org/10.1016/j.biopha.2018.10.167
  20. Miguel Manzano, María Vallet-Regí, Mesoporous Silica Nanoparticles for Drug Delivery, Advanced Functional Materials, 30, 2, (2020), 1902634 https://doi.org/10.1002/adfm.201902634
  21. Sunil Kumar, M. M. Malik, Rajesh Purohit, Synthesis Methods of Mesoporous Silica Materials, Materials Today: Proceedings, 4, 2, Part A, (2017), 350-357 https://doi.org/10.1016/j.matpr.2017.01.032
  22. Raju Kumar Sharma, Gobinda Dey, Pritam Banerjee, Jyoti Prakash Maity, Chung-Ming Lu, Shau-Chun Wang, Yi-Hsun Huang, Pin-Yun Lin, Yung-Ping Chen, Chien-Yen Chen, Influence of chemical and bio-surfactants on physiochemical properties in mesoporous silica nanoparticles synthesis, Journal of Materials Research and Technology, 24, (2023), 2629-2639 https://doi.org/10.1016/j.jmrt.2023.03.170
  23. Raoof Bardestani, Gregory S. Patience, Serge Kaliaguine, Experimental methods in chemical engineering: specific surface area and pore size distribution measurements—BET, BJH, and DFT, The Canadian Journal of Chemical Engineering, 97, 11, (2019), 2781-2791 https://doi.org/10.1002/cjce.23632
  24. Ozge Malay, Iskender Yilgor, Yusuf Z. Menceloglu, Effects of solvent on TEOS hydrolysis kinetics and silica particle size under basic conditions, Journal of Sol-Gel Science and Technology, 67, 2, (2013), 351-361 https://doi.org/10.1007/s10971-013-3088-4
  25. Fiona W. M. Ling, Hayder A. Abdulbari, Chin Sim-Yee, Investigating the effect of nonionic surfactant on the silica nanoparticles formation and morphology in a microfluidic reactor, Journal of Flow Chemistry, 11, 4, (2021), 737-750 https://doi.org/10.1007/s41981-021-00139-4
  26. Viktoriya Semeykina, Ilya Zharov, Medium controlled aggregative growth as a key step in mesoporous silica nanoparticle formation, Journal of Colloid and Interface Science, 615, (2022), 236-247 https://doi.org/10.1016/j.jcis.2022.01.166
  27. Cristina Zea, Jenifer Alcántara, Rosa Barranco-García, Manuel Morcillo, Daniel De la Fuente, Synthesis and Characterization of Hollow Mesoporous Silica Nanoparticles for Smart Corrosion Protection, Nanomaterials, 8, 7, (2018), 478 https://doi.org/10.3390/nano8070478
  28. Seyyed Pouya Hadipour Moghaddam, Mostafa Yazdimamaghani, Hamidreza Ghandehari, Glutathione-sensitive hollow mesoporous silica nanoparticles for controlled drug delivery, Journal of Controlled Release, 282, (2018), 62-75 https://doi.org/10.1016/j.jconrel.2018.04.032
  29. Mariya I. Vlasenkova, Dolinina Ekaterina S., Elena V. and Parfenyuk, Preparation of mesoporous silica microparticles by sol–gel/emulsion route for protein release, Pharmaceutical Development and Technology, 24, 2, (2019), 243-252 https://doi.org/10.1080/10837450.2018.1457051
  30. S. Saravanan, R. S. Dubey, Synthesis of SiO2 nanoparticles by sol-gel method and their optical and structural properties, Romanian Journal of Information Science and Technology, 23, 1, (2020), 105-112
  31. Kamlesh Panwar, Manjeet Jassal, Ashwini K. Agrawal, In situ synthesis of Ag–SiO2 Janus particles with epoxy functionality for textile applications, Particuology, 19, (2015), 107-112 https://doi.org/10.1016/j.partic.2014.06.007
  32. Dian Maruto Widjonarko, Jumina Jumina, Indriana Kartini, Nuryono Nuryono, Phosphonate Modified Silica for Adsorption of Co(II), Ni(II), Cu(II), and Zn(II), Indonesian Journal of Chemistry, 14, 2, (2014), 143-151

Last update:

No citation recorded.

Last update: 2025-06-08 02:16:35

No citation recorded.