DOI: https://doi.org/10.14710/presipitasi.v18i2.358-366

Re-layout of Temporary Storage Area for Toxic and Hazardous Waste using 5S (Seiri, Seiton, Seiso, Seiketsu, Sitsuke)

*Muhammad Ilham Adelino  -  Putra Indonesia University, Indonesia
Meldia Fitri  -  Putra Indonesia University, Indonesia
Ayu Sundari  -  Putra Indonesia University, Indonesia

Citation Format:
Abstract

One of the industries that produces toxic and hazardous waste is rubber industry. This study was conducted in PT. Famili Raya. The problem was toxic and hazardous waste placed in an irregular placement and no follow the government regulations for storing and managing. This aims of this study were to redesign temporary storage area for hazardous waste based on 5S (Seiri, Seiton, Seiso, Seiketsu, Shitsuke) and the regulation, Minister of Environment and Forestry No. 12/2020. The object of this study was temporary storage area for toxic and hazardous waste in PT. Famili Raya. The data used were current condition, actual dimensions of temporary storage area, dimensions of waste, input and output data, and dimensions of a forklift. The results obtained were the proposed layout using the 5S approach could be used to redesign the storage layout in the temporary storage area. Space utility could be reduced by 32,67%. The decrease in space utility did not reduce the maximum storage capacity for used batteries, used tubular lamp, used oil waste, and turpentine oil waste.

Fulltext View|Download
Keywords: Temporary Storage Area; Toxic and Hazardous Waste; 5S; Rubber industry

Article Metrics:

Article Info
Section: Original Research Article
Language : EN
Recent articles
A Brief of Water and Soil Pollution Management (Recent Trend and Economic Perspective) Re-layout of Temporary Storage Area for Toxic and Hazardous Waste using 5S (Seiri, Seiton, Seiso, Seiketsu, Sitsuke) Utilization of Spent Nickel Catalyst as Raw Material for Ni-Rich Cathode Material Removal Efficiency of Chemical Oxygen Demand on Greywater using Multi Soil Layering (MSL) Technology Forecasting Greenhouse Gas Emissions from Heavy Vehicles: A Case study of Semarang City Water Conservation Planning at Telkom University Landmark Tower Bandung Campus Household Solid Waste Management Strategy in Danau Teluk Sub-District, Jambi City More recent articles
Most cited articles
Penerangan Jalan Umum Tenaga Surya: Studi Kasus di Kota Pangkalpinang KAJIAN PUSTAKA POTENSI PEMANFAATAN GREYWATERSEBAGAI AIR SIRAM WC DAN AIR SIRAM TANAMAN DI RUMAH TANGGA PENGOLAHAN AIR LINDI DENGAN PROSES KOMBINASI BIOFILTER ANAEROB-AEROB DAN WETLAND ELECTRICITY GENERATION FROM LANDFILL GAS EVALUASI PENGELOLAAN SAMPAH RUMAH SAKIT PUSAT ANGKATAN DARAT GATOT SOEBROTO More cited articles
  1. Chandra, J. and Sunarni, T. 2019. Perancangan Tata Letak Mi Instan di Toko Amuk dengan Mempertimbangkan Sistem Persediaan. Jurnal Ilmiah Teknik Industri 7 (1), 60-69
  2. Clarisca, V. A., Samadikun, B. P. 2020. Pengelolaan Limbah Padat Bahan Berbahaya dan Beracun (B3) Medis RS Bhayangkara Tk. I Raden Said Sukanto. Jurnal Presipitasi 17 (1), 75-84
  3. Dewantara, F. A., Setiani, V., Rizal, M. C. 2018. Perancangan Tempat Penyimpanan Senentara (TPS) Limbah Bahan Berbahaya dan Beracun (B3) Pada Perusahaan Galangan Kapal. Proceeding first Conference on Safety Engineering and Its Application, 220-225
  4. Kementerian Lingkungan Hidup dan Kehutanan Republik Indonesia. Peraturan Menteri Lingkungan Hidup dan Kehutanan Republik Indonesia Nomor P.12/MENLHK/SETJEN/PLB.3/5/2020 Tentang Penyimpanan Limbah Bahan Berbahaya dan Beracun. Available from: < https://peraturan.bpk.go.id/Home/Details/163475/permen-lhk-no-12-tahun-2020>
  5. Marie, I. A., Claudia, C., Adianto. 2020. Optimasi Persediaan Bahan Baku Berdasarkan Pengali Lagrance serta Rancangan Tata Letak Gudang Menggunakan Metode Shared Storage. Jurnal Teknik Industri 10 (2), 105-112
  6. Maukar, A. L. and Hakim, A.N., 2018. Relayout Ruang Penyimpanan Sampel Stabilitas Impermeable Berdasarkan Konsep Similarity dan Popularity Serta Prinsip 5S. Jurnal Ilmiah Teknik Industri 6 (2), 88-96
  7. Muharni, Y., Irman, A., Noviansyah, Y. 2020. Perancangan Tata Letak Gudang Barang Jadi Menggunakan Kebijakan Class-Based Storage dan Particle Swarm Optimization di PT XYZ. Jurnal Teknik Industri 10 (3), 200-209
  8. Murti, I. and Ibrahim, A. 2018. Identifikasi Bahaya dan Perancangan Tempat Penyimpanan Sementara (TPS) Limbah B3 Proses Sandblasting Di PT Swadaya Graha. Energy 8 (1), 1 – 7
  9. Pertiwi, V., Joko, T., Dangiran, H. L., 2017. Evaluasi Pengelolaan Limbah Bahan Berbahaya dan Beracun (B3) di Rumah Sakit Roemani Muhammadiyah Semarang. Jurnal Kesehatan Masyarakat 5 (3), 420-430
  10. Pratiwi, R. W., Setiawan, A., Afiuddin, A. E. 2018. Perancangan Tempat Penyimpanan Sementara (TPS) Limbah B3 (Studi Kasus: Bengkel Maintenance PT. Varia Usaha). Proceeding first Conference on Safety Engineering and Its Application, 199-204
  11. Rachmawati, S., Sumiyaningsih, E., Atmojo, T. B. 2018. Analisis Manajemen Pengelolaan Limbah Padat Medis B3 di Rumah Sakit universitas Sebelas Maret Surakarta. Prosiding SNST ke-9, 31-36
  12. Septiani, W., Dahana, A. E., Adisuwiryo, S., 2018. Perancangan Model Tata Letak Gudang Bahan Baku Dengan Metode Class Based Storage dan Simulasi Promodel. Jurnal Ilmiah Teknik Industri 6 (2), 106-116
  13. Sugeng, U. M. 2016. Perancangan Tata Letak Warehouse Baru Untuk Meningkatkan Kapasitas Penyimpanan Material dengan Metode Dedicated Storage di PT. XX. JISI: Jurnal Integrasi Sistem Industri 3 (1), 23-28
  14. Utami, K. T., Syafrudin. 2018. Pengelolaan Limbah Bahan Berbahaya dan Beracun (B3) Studi Kasus PT. Holcim Indonesia Tbk. Naronggong Plant. Jurnal Presipitasi: Media Komunikasi dan Pengembangan Teknik Lingkungan 15 (2), 127-132

Last update:

No citation recorded.

Last update: 2024-11-22 21:05:38

No citation recorded.