skip to main content

Inorganic Waste Reduction Planning with The Implementation of Dipo Waste Bank (DWB) and Reverse Vending Machine (RVM) at Diponegoro University

*Sri Sumiyati  -  Universitas Diponegoro, Indonesia
Mochamad Arief Budihardjo  -  Universitas Diponegoro, Indonesia
Bimastyaji Surya Ramadhan  -  Universitas Diponegoro, Indonesia
Budi Warsito  -  Universitas Diponegoro, Indonesia
Hanif Kusumasasmita  -  Universitas Diponegoro, Indonesia
Ghifar Rahman  -  Universitas Diponegoro, Indonesia
Hizkia Christian Putra Setiadi  -  Universitas Diponegoro, Indonesia

Citation Format:
Abstract

Plastic waste is a global environmental problem that has existed for a long time and has not been resolved. On a worldwide scale, solid waste increased to 9.1 billion tons, of which 6.9 billion tons was plastic waste. Undip is one of the largest public universities.  As one of the universities that supports the achievement of SDGs Number 12 concerning waste management, Diponegoro University has a Waste Bank, namely the Dipo Waste Bank (DWB). The method used in this study is mass balance. Based on the projected waste generation from 2021-2030, the era of inorganic waste in the composition of plastic bottles at Undip is  42,577 kg/day. DWB is expected to realize independent and sustainable waste management within Diponegoro University (UNDIP). In its course, waste management efforts are felt to be lacking due to several obstacles and participation that are not optimal. There are three scenarios of reducing inorganic waste of  plastic bottles in  the study, namely the  baseline scenario,  the  Dipo Waste Bank (DWB) scenario can achieve the  target  of 20% of waste that can be recovered by DWB and Reverse Vending Machine (RVM).

Fulltext View|Download
Keywords: Reverse Vending Machine (RVM); Undip; Dipo Waste Bank (DWB)

Article Metrics:

  1. Aufa, A., Sumiyati, S., Budihardjo, M., Ramadan, B., Salman, H., Wirawan, R. 2021. Improving Recycling Behaviour Through Waste Bank Implementation in Diponegoro University. Final Project of the Department of Environmental Engineering
  2. Diana, A. and Subaidillah F. 2019. Training on the Use of Plastic Bottle Waste as An Environmentally Friendly Paving Block Mixture : Jurnal Abdiraja. 2 (1) : 1
  3. Diponegoro University Rector’s Regulation. 2019. Waste Management Regulations through Waste Banks. Diponegoro University Rector’s : Semarang
  4. Geyer, R., Jambeck, J.R., Law, K.L., 2017. Production, Use, and Fate of All Plastics Ever Made. Science Advances. 3, e10700782
  5. Merino, V., dan Ayer, D. 2018. Plastic Pollution Primer and Action toolkit: End Plastic Pollution. Earth Day Network
  6. Mufti, Mufti, and Indra Indra. 2016. Design and Build a Smart Trash Bin Weighing And Recognizing The Type Of Waste In Budi Luhur Waste Bank. Budi Luhur Information Technology. 13 (2) : 25-29
  7. National Standardization Agency. 2008. SNI 19-3242-2008, Concerning Waste Management in Settlements. National Standardization Agency : Jakarta
  8. Regulation of the State Minister of environment of the Republic of Indonesia Number 13 of 2012 concerning Guidelines for the Implementation of Reduce, Reuse, and Recycle through Waste Banks
  9. Selomo, M., Birawida, A., Mallongi, A., Muammar., M. 2016. Waste Bank as One of the Solutions for Handling Waste in Makassar City. Journal of MKMI. 12 (4) : 233
  10. Zheng, J., Suh, S. 2019. Strategies to Reduce the Global Carbon Footprint of Plastics. Natural Climate Change Journal. 9 (1) : 374–378

Last update:

No citation recorded.

Last update: 2024-04-28 06:03:04

No citation recorded.