Optimasi Adsorpsi Ion Mg2+ pada Fixed Bed Column dengan Menggunakan Response Surface Methodology

Novi Sylvia; Meriatna Meriatna; Fikri Hasfita; Lukman Hakim

doi:10.14710/reaktor.17.3.126-131

DOI: https://doi.org/10.14710/reaktor.17.3.126-131

Optimasi Adsorpsi Ion Mg2+ pada Fixed Bed Column dengan Menggunakan Response Surface Methodology

*Novi Sylvia

- Jurusan Teknik Kimia, Universitas Malikussaleh, Indonesia

Meriatna Meriatna - Jurusan Teknik Kimia, Fakultas Teknik, Universitas Malikussaleh, Indonesia

Fikri Hasfita - Jurusan Teknik Kimia, Fakultas Teknik, Universitas Malikussaleh, Indonesia

Lukman Hakim - Jurusan Teknik Kimia, Fakultas Teknik, Universitas Malikussaleh, Indonesia

BibTex Citation Data :

@article{Reaktor14678,
    author = {Novi Sylvia and Meriatna Meriatna and Fikri Hasfita and Lukman Hakim},
    title = {Optimasi Adsorpsi Ion Mg2+ pada Fixed Bed Column dengan Menggunakan Response Surface Methodology},
    journal = {Reaktor},
  volume = {17},
    number = {3},
    year = {2017},
    keywords = {adsorpsi; Box-Behnken desain; optimasi; magnesium (Mg2+).},
    abstract = {  A  bstract           OPTIMIZATION   ADSORPTION   OF M  g   2+    ION ON FIXED BED COLUMN USING RESPONSE SURFACE METHODOLOGY  .   Modeling of the adsorption process is used to establish the mathematical relationship between the interacting process variables and process optimization. This is important to determine the factor values that produce a maximum response. Adsorption of   Mg   from groundwater was optimized using response surface methodology based on Box-Behnken design   was   used to analyze adsorption data. The process was investigated by continuous experiments. Variables included in the process were: bed depths (7.5, 10, and 12.5 cm), time (20, 40, and 60 min), and flow rate (6, 10, and 14 L/min). Regression analysis was used to analyze the developed models. The outcome of this research showed that 72.784% of the variability in removal efficiency is attributed to the three process variables considered, that is, bed depths, time, and flow rate. Optimization tests showed that the optimum operating conditions for the adsorption process occurred at a bed depth of 11.37 cm, time of 55.53 min and flow rate of 6 L/min.           Keywords:   adsorption; Box-Behnken design; magnesium (Mg 2+ ); optimization        Abstrak    Pemodelan dari proses adsorpsi digunakan untuk me  nentukan   hubungan matematis antara variabel proses interaksi dan proses optimasi. Hal ini penting untuk menentukan nilai faktor yang menghasilkan respon maksimum. Adsorpsi magnesium (  Mg 2+   ) da  ri   air tanah dioptimalkan menggunakan metodologi respon permukaan   model   Desain Box-Behnken yang digunakan untuk menganalisis data adsorpsi. P  ercobaan dilakukan secara kontinyu  . Variabel yang termasuk dalam proses tersebut adalah:   tinggi unggun   (7,5  ,   10 dan 12,5 cm), waktu   kontak   (20, 40, dan 60 menit), dan   laju alir   (6, 10, dan 14 L/m  enit  ). Analisis regresi digunakan untuk menganalisis model yang dikembangkan. Hasil penelitian menunjukkan bahwa   72,784  % efisiensi penyisihan   Mg 2+      ditentukan oleh   tiga variabel proses, yaitu   tinggi unggun  , waktu   kontak  , dan laju alir.   Hasil   optimasi menunjukkan bahwa kondisi operasi optimum untuk proses adsorpsi terjadi pada   tinggi unggun   11,3  7   cm, waktu   kontak   55,  53   menit dan laju   alir   6 L/menit.       Kata kunci:   adsorpsi  ;   Box-Behnken desain  ;   magnesium (Mg 2+ ); optimasi       },
   issn = {2407-5973},   pages = {126--131}  doi = {10.14710/reaktor.17.3.126-131},
    url = {https://ejournal.undip.ac.id/index.php/reaktor/article/view/14678}
}

Citation Format:

Abstract

Abstract

OPTIMIZATION ADSORPTION OF Mg²⁺ ION ON FIXED BED COLUMN USING RESPONSE SURFACE METHODOLOGY. Modeling of the adsorption process is used to establish the mathematical relationship between the interacting process variables and process optimization. This is important to determine the factor values that produce a maximum response. Adsorption of Mg from groundwater was optimized using response surface methodology based on Box-Behnken design was used to analyze adsorption data. The process was investigated by continuous experiments. Variables included in the process were: bed depths (7.5, 10, and 12.5 cm), time (20, 40, and 60 min), and flow rate (6, 10, and 14 L/min). Regression analysis was used to analyze the developed models. The outcome of this research showed that 72.784% of the variability in removal efficiency is attributed to the three process variables considered, that is, bed depths, time, and flow rate. Optimization tests showed that the optimum operating conditions for the adsorption process occurred at a bed depth of 11.37 cm, time of 55.53 min and flow rate of 6 L/min.

Keywords: adsorption; Box-Behnken design; magnesium (Mg²⁺); optimization

Abstrak

Pemodelan dari proses adsorpsi digunakan untuk menentukan hubungan matematis antara variabel proses interaksi dan proses optimasi. Hal ini penting untuk menentukan nilai faktor yang menghasilkan respon maksimum. Adsorpsi magnesium (Mg²⁺) dari air tanah dioptimalkan menggunakan metodologi respon permukaan model Desain Box-Behnken yang digunakan untuk menganalisis data adsorpsi. Percobaan dilakukan secara kontinyu. Variabel yang termasuk dalam proses tersebut adalah: tinggi unggun (7,5, 10 dan 12,5 cm), waktu kontak (20, 40, dan 60 menit), dan laju alir (6, 10, dan 14 L/menit). Analisis regresi digunakan untuk menganalisis model yang dikembangkan. Hasil penelitian menunjukkan bahwa 72,784% efisiensi penyisihan Mg²⁺ ditentukan oleh tiga variabel proses, yaitu tinggi unggun, waktu kontak, dan laju alir. Hasil optimasi menunjukkan bahwa kondisi operasi optimum untuk proses adsorpsi terjadi pada tinggi unggun 11,37 cm, waktu kontak 55,53 menit dan laju alir 6 L/menit.

Kata kunci: adsorpsi; Box-Behnken desain; magnesium (Mg²⁺); optimasi

Fulltext View|Download

Keywords: adsorpsi; Box-Behnken desain; optimasi; magnesium (Mg2+).

Article Metrics:

Article Info

Section: Research Article

Language : IND

In Volume 17 No. 3 September 2017

Recent articles

Front Matter Reaktor Vol 17 No. 3 September 2017 Ekstraksi Asam Lemak Bebas dari Minyak Dedak Padi Menggunakan Etanol-Air dalam Tangki Pengaduk SINTESIS GLISEROL KARBONAT DARI GLISEROL DAN UREA MENGGUNAKAN KATALIS RESIN INDION 225 Na Characteristics and Free Radical Scavenging Activity of Zinc Oxide (ZnO) Nanoparticles Derived from Extract of Coriander (Coriandrum sativum L.) Back Matter Reaktor No. 17 No. 3 September 2017 More recent articles

Most cited articles

THE OPTIMIZATION OF PRODUCTION ZEOLITE Y CATALYST FROM RHA BY RESPONSE SURFACE METHODOLOGY Synthesized of Double Layer Thin Film ZnO/ZnO:Ag by Sol-Gel Method for Direct Blue 71 Photodegradation EFFECT OF TEMPERATURE AND PARTICLE SIZE ON THE ALKALINE EXTRACTION OF PROTEIN FROM CHICKEN BONE WASTE UKURAN PARTIKEL DAN KONFORMASI KRISTAL ZEOLIT-A HASIL SINTESIS DENGAN PENAMBAHAN TETRAPROPILAMMONIUM HIDROKSIDA (TPAOH) PRODUKSI KARBON AKTIF DARI BATUBARA BITUMINUS DENGAN AKTIVASI TUNGGAL H3PO4, KOMBINASI H3PO4-NH4HCO3, DAN TERMAL More cited articles

Last update:

No citation recorded.

Last update: 2024-04-15 11:32:16

No citation recorded.

Copyright (c) 2017 REAKTOR
under http://creativecommons.org/licenses/by-nc/4.0.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Reaktor journal and Department of Chemical Engineering Diponegoro University as the journal publisher. Copyright encompasses exclusive rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any form or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc., will be allowed only with a written permission from Reaktor journal and Department of Chemical Engineering Diponegoro University.