A STUDY OF UNCOATED AND COATED UREA CRYSTALS DISSOLUTION IN STIRRED VESSEL

M. H. Ismayanda; M. Zakaria

doi:10.14710/reaktor.8.2.81-84

DOI: https://doi.org/10.14710/reaktor.8.2.81-84

A STUDY OF UNCOATED AND COATED UREA CRYSTALS DISSOLUTION IN STIRRED VESSEL

*M. H. Ismayanda - , Indonesia

M. Zakaria - , Indonesia

Published: 19 Jun 2017.

Citation Format:

Abstract

An immersing and spray coating process has been developed for the continous production of tapioca starch and silica coated urea. The coating thicness and quality of coated urea was produced in a laboratory-scale unit. The dissolution rates of urea uncoated and coated urea crystals were studied in a stirred vessel. Coated urea crystals genarally shows low dissolution rates compared to uncoated for all coating materials. The effect of coating was best with tapoca starch and silica combination baked at 70oC. This cating material of tapioca starch coating urea the dissolution time was in the range of 300 to 360 second mass transfer coefficient in the range of between 3.63 x 10-6 to 2.91 x 10-3 cm 2/s. And for the silica coated urea coating material, the dissolution time was in the range of 300 to 380 second. mass coefficient in the ranger of 1.65 x 10-2 to 3.30 x 10-2 cm/s.and diffusion coefficient in the ranger of 3.57 x 10-6 to 3.30 x30 x 10-3 cm 2/s. The dissolution rangers from about 87% for a product containing 10.5 % tapioca starch to the dissolution range of about 85% for a product containing 9.5% silica

Keywords : urea crystals, Coating, dissolution, stirred vessel

Fulltext View|Download

Keywords: urea crystals, Coating, dissolution, stirred vessel

Article Metrics:

Article Info

Section: Research Article

Language : ENGLISH

In Volume 08 No.2 Desember 2004

Recent articles

A STUDY OF UNCOATED AND COATED UREA CRYSTALS DISSOLUTION IN STIRRED VESSEL OPTIMASI PROSES FERMENTASI DENGAN MEDIA PADAT DALAM PEMBUATAN SOYSAUCE POWDER DENGAN MENGGUNAKAN BIAKAN CAMPURAN MIKROBA NCS 54 HOE PADA KONDISI MESOFILIK MODEL KESETIMBAGAN ADSORPSI Zn+2 DENGAN KALOIN More recent articles

Most cited articles

Demulsifier Selection Based On The Evaluation Of Demulsification Performance Indicators COMBINATION OF REVERSE OSMOSIS AND ELECTRODEIONIZATION FOR SIMULTANEOUS SUGAR RECOVERY AND SALTS REMOVAL FROM SUGARY WASTEWATER KINETIKA REAKSI HIDROLISIS Fabrication and characterization of polyimide/ polyethersulfone-fumed silica mixed matrix membrane for gas separation PENGOLAHAN PRIMER LIMBAH TEKSTIL DENGAN ELEKTROKOAGULASI More cited articles

Last update:

No citation recorded.

Last update: 2025-01-28 02:17:15

No citation recorded.

In order for REAKTOR to publish and disseminate research articles, we need non-exclusive publishing rights (transferred from the author(s) to the publisher). This is determined by a publishing agreement between the Author(s) and REAKTOR. This agreement deals with transferring or licensing the publishing copyright to REAKTOR while Authors still retain significant rights to use and share their published articles. REAKTOR supports the need for authors to share, disseminate, and maximize the impact of their research and these rights in any databases.

As a journal author, you have the right to use your article for many purposes, including by your employing institute or company. These Author rights can be exercised without the need to obtain specific permission. Authors publishing in BCREC journals have wide rights to use their works for teaching and scholarly purposes without needing to seek permission, including, but not limited to:

use for classroom teaching by the Author or the Author's institution and presentation at a meeting or conference and distributing copies to attendees;
use for internal training by the author's company;
distribution to colleagues for their research use;
use in a subsequent compilation of the author's works;
inclusion in a thesis or dissertation;
reuse of portions or extracts from the article in other works (with full acknowledgment of the final article);
preparation of derivative works (other than commercial purposes) (with full acknowledgment of the final article);
voluntary posting on open websites operated by the author or the author’s institution for scholarly purposes,

(but it should follow the open access license of Creative Common CC-by-SA License).

Authors/Readers/Third Parties can copy and redistribute the material in any medium or format and remix, transform, and build upon the material for any purpose, even commercially. Still, they must give appropriate credit (the name of the creator and attribution parties (authors detail information), a copyright notice, an open access license notice, a disclaimer notice, and a link to the material), provide a link to the license, and indicate if changes were made (Publisher indicates the modification of the material (if any).

Authors/Readers/Third Parties can read, print and download, redistribute or republish the article (e.g., display in a repository), translate the article, download for text and data mining purposes, reuse portions or extracts from the article in other works, sell or re-use for commercial purposes, remix, transform, or build upon the material, they must distribute their contributions under the same license as the original Creative Commons Attribution-ShareAlike (CC BY-SA).