skip to main content

DEALUMINATION AND CHARACTERIZATION OF ZSM - 5 AS CATALYST FOR GLYCEROL CONVERSION TO GLYCEROL MONOLAURATE

*Didi Dwi Anggoro  -  Chemical Engineering Department, Engineering Faculty, Diponegoro University, Indonesia
Riko Rikardo Putra  -  Chemical Engineering Department, Engineering Faculty, Diponegoro University, Indonesia
Herawati Oktaviani  -  Chemical Engineering Department, Engineering Faculty, Diponegoro University, Indonesia
Lutfi Af’idatul Kamilah  -  Chemical Engineering Department, Engineering Faculty, Diponegoro University, Indonesia
FatmaTsaniya Chamdani  -  Chemical Engineering Department, Engineering Faculty, Diponegoro University, Indonesia
Received: 13 Aug 2018; Published: 24 Aug 2018.
Open Access Copyright (c) 2018 Reaktor under http://creativecommons.org/licenses/by-nc-sa/4.0.

Citation Format:
Abstract

Glycerol Monolaurate (GML) is a naturally occurring fatty acid widely utilized in food, cosmetics, andhomeopathic supplements. Glycerol is a compound glycerides, a byproduct of biodiesel production from the transesterification process. Glycerol is converted to glycerol derivative product that has more value as Glycerol Monolaurate (GML).GML is a naturally occurring fatty acid widely utilized in food, cosmetics, andhomeopathic supplements.One of the catalyst that had beenused is ZSM-5. Dealumination is used to change the acidity of the zeolite. This study consists of several stages, there are dealumination of zeolite ZSM-5 using H2SO4, drying at 110 ° C for 1 hour, Then calcination at a temperature of 550 ° C for 4 hours. Characterization catalyst to testing the acidity of the catalyst by absorption of ammonia and pyridine. Acidity of Zeolite is expressed in the mmol of ammonia or pyridine per gram of catalyst. Synthesis of monolaurate with dealuminated result are performed by GC-MS analysis, it’s to determine the molecular weight and to show a purity of Glycerol Monolaurate. Testing results obtained in the optimum conditions at dealumination temperature and dealumination time respectively are 40-60 0C and 2-5 hours. The dealumination variables are acid concentration, temperature and time of dealumination affecting ZSM-5 acidity and % yield of GML. The acidity affecting the yield% of Glycerol monolaurate produced

 

Keywords :Glycerol, Glycerol Monolaurate, dealumination, ZSM - 5.

Fulltext View|Download

Article Metrics:

Last update:

  1. Unlocking glycerol monolaurate potential: A comprehensive review of synthesis pathways, catalyst insights, and optimization strategies

    Udit Khandara, Verraboina Subbaramaiah, Vijayalakshmi Gosu. Chemical Engineering Journal, 488 , 2024. doi: 10.1016/j.cej.2024.150938
  2. Kinetic Study of Glycerol Monolaurate (GML) Production from Glycerol with Lauric Acid Using a Dealuminated Zeolite Y Catalyst

    H Oktavianty, S B Sasongko, L Buchori, D D Anggoro. IOP Conference Series: Materials Science and Engineering, 1053 (1), 2021. doi: 10.1088/1757-899X/1053/1/012060
  3. The effect of dealumination process on zeolite Y acidity and morphology

    Setia Budi Sasongko, Didi Dwi Anggoro, Luqman Buchori, Rico Febrianto, Ester Alninta Basa Siagian. PROCEEDINGS OF 2ND INTERNATIONAL CONFERENCE ON CHEMICAL PROCESS AND PRODUCT ENGINEERING (ICCPPE) 2019, 2197 , 2020. doi: 10.1063/1.5140913

Last update: 2024-12-27 03:48:48

  1. Basicity Optimization of KF/Ca-MgO Catalyst using Impregnation Method

    Anggoro D.. Bulletin of Chemical Reaction Engineering & Catalysis, 14 (3), 2019. doi: 10.9767/bcrec.14.3.4248.678-682