skip to main content

The Study of Hydrothermal Carbonization and Activation Factors' Effect on Mesoporous Activated Carbon Production From Sargassum sp. Using a Multilevel Factorial Design

Tirto Prakoso  -  Chemical Engineering Departmen, Bandung Institute of Technology, Indonesia
*Heri Rustamaji  -  Deapartment of Chemical Engineering, Lampung University, Indonesia
Daniel Yonathan  -  Chemical Engineering Departmen, Bandung Institute of Technology, Indonesia
Hary Devianto  -  Chemical Engineering Departmen, Bandung Institute of Technology, Indonesia
Pramujo Widiatmoko  -  Chemical Engineering Departmen, Bandung Institute of Technology, Indonesia
Jenny Rizkiana  -  Chemical Engineering Departmen, Bandung Institute of Technology, Indonesia
Guoqing Guan  -  Hirosaki University, Japan
Open Access Copyright (c) 2022 Reaktor under http://creativecommons.org/licenses/by-nc-sa/4.0.

Citation Format:
Abstract

Seaweeds are large-scale multicellular marine algae categorized based on color as Chlorophyceae, Rhodophyceae, and Phaeophyceae. No information has been provided on the conditions affecting the production of mesoporous activated carbon from one member of the described aquatic plants, namely Sargassum sp. Therefore, this study aimed to determine the impact of the main factors and their interactions on Sargassum sp.-derived activated carbon manufactured (SAC) by hydrothermal carbonization and CO2 activation methods. A mathematical approach was employed using a multilevel factorial design with the main factors being the activator type (ZnCl2, CaCl2, & KOH), hydrothermal temperature (200, 225, & 250oC), and activator ratios (2 & 4). Meanwhile, the response variables were yield and BET surface area (SBET) of SAC. Morphological, functional, crystallographic, and porosity characterization was carried out on the samples. The SAC-Ca-200-2 sample had the highest yield, with the value being 26.5 percent of weight. The activators having the highest specific surface area (SBET) were SAC-Zn-250-4, SAC-Ca-225-2, and SAC-K-250-2, with 1552, 1368, and 1799 m2/g, respectively. The pore size distribution in SAC products ranged from 2.16 to 10 nm in diameter. The analysis conducted indicated the activator type and interaction with its ratio substantially impacted the SAC yield value; besides, only the activator type affects the formation of high surface area pores.

Fulltext View|Download

Article Metrics:

Last update:

  1. Physical and morphological alteration of Sargassum-derived ultraporous superactivated hydrochar with remarkable cationic dye adsorption

    Cadianne Chambers, Swarna Saha, Savannah Grimes, Josh Calhoun, M. Toufiq Reza. Biomass Conversion and Biorefinery, 2023. doi: 10.1007/s13399-023-04326-2
  2. Parameter study in preparation of nitrogen-rich-activated carbon for supercapacitors' application using multilevel factorial design

    Heri Rustamaji, Tirto Prakoso, Hary Devianto, Pramujo Widiatmoko. Materials Today: Proceedings, 2023. doi: 10.1016/j.matpr.2023.04.163
  3. Chemical Substitutes from Agricultural and Industrial By‐Products

    Tirto Prakoso, Hary Devianto, Heri Rustamaji, Praswasti PDK Wulan, Misri Gozan. 2024. doi: 10.1002/9783527841141.ch4
  4. Water disinfection via nature-inspired electrochemical flow cells in resource-limited settings

    Inmaculada García-López, Vicente Ismael Águeda Maté, Sergio Camino Aroca, Amalio Garrido-Escudero. Next Sustainability, 5 , 2025. doi: 10.1016/j.nxsust.2024.100072

Last update: 2024-10-08 18:56:00

No citation recorded.