ANALISA TEKNIS DAN EKONOMIS PENGGUNAAN COREMAT UNTUK KONSTRUKSI FRP (FIBERGLASS REINFORCED PLASTIC) SANDWICH PADA BADAN KAPAL

Abstract
Planning of ship construction is make its having good effectivity value and efficiency. Composite as materialalternative to changes of steel feedstock and wood has many applied named FRP (fiberglass reinforcedplastics) single skin. The weakness of this FRP was heavy construction and requires many production time.Therefore, will be checked comparison between single skin with sandwich constructions for shell.In this research, the way for making composite is hand lay up method with three various thickness of skinthere are : t, t/2, and t/4. To know strength comparison from the various skin of sandwich with single skin,must be test, consist of tensile test.. The result is analyzed then compared by BKI (Biro Klasifikasi Indonesia)rules for the fiberglass ship.Based on the result, indicates that optimization skin thickness of sandwich construction applies Corematwhich tensile strength it is equivalent with Single Skin at 2/3t and usage of Sandwich construction causes23,12 % lighter. In economic analyze, advantage from low weight is compensation of addition 23,12 % DWT.Material cost for Sandwich about 11,35% bigger than Single Skin construction.
Keywords: FRP, Coremat, Single Skin, Sandwich.
Article Metrics:
Others articles
Penentuan Potensi Sumberdaya Batu Gamping Sebagai Bahan Baku Semen Daerah Gandu Dan Sekitarnya, Kecamatan Bogorejo, Kabupaten Blora, Jawa Tengah
PENGOLAHAN DATA GEOLISTRIK DENGAN METODE SCHLUMBERGER
KUANTITAS DAN KUALITAS RUANG TERBUKA HIJAU DI PERMUKIMAN PERKOTAAN
LIFE CYCLE ASSESSMENT OF PAPER TOWEL AND ELECTRIC DRYER AS HAND DRYING METHOD IN THE UNIVERSITY OF MELBOURNE
PERENCANAAN DAN PENGANGGARAN KAMPUS BERKELANJUTAN: GREEN CAMPUS UNIVERSITAS DIPONEGORO
SIFAT MEKANIK DAN MORFOLOGI PLASTIK BIODEGRADABLE DARI LIMBAH TEPUNG NASI AKING DAN TEPUNG TAPIOKA MENGGUNAKAN PEMLASTIK GLISEROL
Last update: 2021-04-20 11:38:15
No citation recorded.
Last update: 2021-04-20 11:38:15
No citation recorded.
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to jurnal TEKNIK and Faculty of Engineering, Diponegoro University as publisher of the journal.
Copyright transfer agreement can be found here: [Copyright transfer agreement in doc] and [Copyright transfer agreement in pdf].