skip to main content

TESTING OF CONCRETE PAVING BLOCKS THE BS EN 1338:2003 BRITISH AND EUROPEAN STANDARD CODE

*Purwanto Purwanto  -  , Indonesia
Yulita Arni Priastiwi  -  , Indonesia

Citation Format:
Abstract
Concrete paving blocks are the choice for road and urban road’s surfacing. Besides their ease inapplication, they also provide design freedom by coloring off the material.Of major importance is their compression strength. The Indonesian SNI categorizes strength to theirpurposes i.e., for parking areas, pedestrian walking areas and heavy industrial estates.According to the SNI 03 – 0691 -1989 and British Standard BS 6717:1986 the strength of a paving blockis determined by the maximum carrying capacity under distributed load. The blocks are placed under acompression apparatus, and the compression strength at failure is recorded.As being observed in the field paving block’s failure pattern differs as to the failure under distributedloading. The paving’s failure mode is distinguished by a bending failure plain at the smallest crosssection.The BS EN 1338 code proposes a different approach. This paper will discuss the methods being used inthe BS EN 1338 code, and evaluates the effectiveness of Indonesian standards to date.
Fulltext View|Download
Keywords: paving blocks, compression testing, bending

Article Metrics:

Last update:

No citation recorded.

Last update: 2024-03-29 14:46:21

  1. Laboratory investigation of Portland cement concrete paver blocks made with Reclaimed Asphalt Pavement aggregates

    Nandi S.. Road Materials and Pavement Design, 2020. doi: 10.1080/14680629.2020.1830153