DOI: https://doi.org/10.14710/teknik.v44i2.50281

Design of Ergonomic Equipment for Carrying Horticultural Plants to Reduce Musculoskeletal Syndrome]

Reka Bentuk Alat Angkut Ergonomis Tanaman Hortikultura untuk Menurunkan Sindrom Musculoskeletal

Resalfa Amelza Wibowo  -  Jurusan Teknik Industri, Fakultas Teknologi Industri, Universitas Islam Indonesia, Indonesia
Hartomo Soewardi  -  Department of Industrial Engineering, Universitas Islam Indonesia, Indonesia
Open Access Copyright (c) 2023 TEKNIK

Citation Format:
Abstract
Horticulture is the activity of cultivating garden plants in the form of fruits, vegetables, flowers, and ornamental plants. This cultivation is carried out starting from nurseries to mass distribution. Conveyance is one of the plant transference equipment in order to support the process. Based on the preliminary study, the transference of plants is still done manually by lifting one by one box weighing 9-10 kg with a limited capacity. This condition affects ineffectiveness and discomfort work process, namely pain in the right shoulder (29%), left upper arm and right upper arm (71%), left forearm and right forearm (100%), right wrist (57%), and right hand (43%). Thus, it is important to modify the conveyance to make it more ergonomic. Redesigning the conveyance using ergonomic principles is the purpose of the research. Quality Function Deployment (QFD) method is used to determine the design specifications of the proposed device to suit the user’s needs. The survey was used to identify attributes of design required by the users. Statistical analysis was done to test a hypothesis. Result of this study shows that the conveyance design developed is valid to suit the user’s need at a significance level of 5%, namely comfortable, easy to use, strong, and effective. The redesigned conveyance can reduce the risk of musculoskeletal syndrome by 60% from high risk to low risk. Thus, the developed design is more comfortable and more effective in use.
Fulltext View|Download
Keywords: conveyance; horticulture; QFD; musculoskeletal syndrome; garden plant
Funding: Jurusan Teknik Industri, Fakultas Teknologi Industri, Universitas Islam Indonesia

Article Metrics:

Article Info
Section: Artikel
Language : EN
Recent articles
Slope Stability Analysis for Slope Geometry Evaluation Using RMR, SMR, and Morgenstern-Price Methods in Pits C2 and C4 of PT Menara Cipta Mulia Mayang Block Open Pit Tin Mine, East Belitung Regency, Bangka Belitung Islands Detection of Actinic Keratosis Skin Cancer Using Gray Level Co-occurrence Matrix Texture Extraction and Color Extraction With Support Vector Machine Classification Analysis of Casting Defects, Tensile Strength, and Hardness of AlSi Alloy Castings from Sand Casting Method with Bangkalan Local Clay Binder Variations Front Matter Back Matter More recent articles
Most cited articles
PEMANFAATAN KREDIT MIKRO PERUMAHAN BAGI MASYARAKAT BERPENGHASILAN RENDAH DI BMT MITRA KHASANAH KOTA SEMARANG PERSEPSI INTEGRASI TATA GUNA LAHAN PADA KAWASAN WATERFRONT DEVELOPMENT (Studi Kasus: Kanal Banjir Barat Semarang) PENCEMARAN LOGAM BERAT MERKURI (Hg) PADA AIRTANAH FAKTOR - FAKTOR PENYEBAB MUNCULNYA ACTIVITY SUPPORT DI KAWASAN RUANG PUBLIK BUNDARAN HOTEL INDONESIA JAKARTA PUSAT TESTING OF CONCRETE PAVING BLOCKS THE BS EN 1338:2003 BRITISH AND EUROPEAN STANDARD CODE More cited articles
  1. Arohman. (2019). Pelaksanaan Pengembangan Produk Dan Saluran Distribusi Guna Meningkatkan Volume Penjualan Pada Industri Tahu Jaya Sendang Agung Lampung Tengah. Jurnal Ilmiah Ekonomi Manajemen, 10(01), 1–10
  2. Atmika, I. K. A. (2017). Konstruksi dan Stabilitas Kendaraan (Kinerja Kendaraan) (Issue April)
  3. Badan Pusat Statistik. (2021). Statistik Hortikultura 2021. Jakarta: BPS RI/BPS-Statistics Indonesia
  4. Bridger, R.S. (1994). Introduction to the Ergonomic. New York: McGraw-Hill International Edition
  5. Budianto, Prasetio, D. E. A., & KN, H. (2020). Perbaikan Postur Kerja Aktivitas Manual Material Handling Industri Kecil Tahu Dengan Metode Ovako Work Posture Analysis System (OWAS). 02(01), 45–51
  6. Cohen, C., 1995. Quality Fuction Deployment: How to Make QFD Work for You. Massachusetts: Addison-Wesley
  7. Dian Putra, M., Pambudi Tama, I., & Puspita Andriani, D. (2016). Analisis Perancangan Alat Bantu Material Handling Produksi Genteng Menggunakan Metode Axiomatic House of Quality (Ahoq). Journal of Engineering and Management Industial System, 4(1), 19–30
  8. Djamal, H., Nelfiyanti, & Kurniawan, M. F. (2019). Desain Alat Bantu Pengambilan Part di Warehouse PT. XYZ dengan Aspek Ergonomi. JISI: Jurnal Integrasi Sistem Industri, 6(2), 81–91
  9. Ficalora, J. P., & Cohen, L. (2013). Quality Function Deployment and Six Sigma: A QFD Handbook. In Pearson Education (Issue July)
  10. Harrianto R. (2008). Buku Ajar Kesehatan Kerja. Jakarta: Penerbit Buku Kedokteran EGC
  11. Iskandar, M. N., & Janari, D. (2021). Usulan Desain Troli Barang Menggunakan Pendekatan Antropometri dan Ergonomi Partisipatori (Studi Kasus PT . Mataram Tunggal Garment). 6(2), 57–66
  12. Laksana, A. J., & Srisantyorini, T. (2020). Analisis Risiko Musculoskeletal Disorders (MSDs) pada Operator Pengelasan (Welding) Bagian Manufakturing di PT. X Tahun 2019. Jurnal Kajian Dan Pengembangan Kesehatan Masyarakat, 1(1), 64–73
  13. Marcell, M. R. R., Supomo, H., & Arif, M. S. (2021). Analisis Teknis dan Ekonomis Perbandingan Laju Korosi Material Baja Galvanis dan Aluminium untuk Memprediksi Umur dan Biaya Reparasi Lambung Kapal. Jurnal Teknik ITS, 10(2)
  14. Masdor, Ernyasih, Ghaida, L., & Handari, S. R. T. (2019). Pelatihan Penanaman Budidaya Tanaman Holtikultural Kangkung (Ipomea sp.) dan Bayam (Amaranthus.sp) di Kelurahan Pondok Jagung Timur. Prosiding Seminar Nasional Pengabdian Masyarakat LPPM UMJ, 1(1), 1–5
  15. McAtamney, L., & Hignett, S. (1995). REBA: a rapid entire body assessment method for investigating work related musculoskeletal disorders. Proceedings of the 31st Annual Conference of the Ergonomics Society of Australia, 13–15
  16. Mycharoka, M. V., Hidayat, N., & Afirianti, T. (2019). Rekomendasi Pembuatan Roda Berbahan Dasar Polyurethane Menggunakan Metode Simple Additive Weighting (SAW) Studi Kasus Pada CV. Sumber Rejeki Teknik. 3(8), 8316–8324
  17. Nuyah. (2009). Penentuan Formulasi Karet Pegangan Setang (Grip Handle) dengan Menggunakan Karet Alam dan Karet Sintetis Berdasarkan Sni 06-7031-2004. Penelitian Balai Riset Dan Standardisasi Industri Palembang
  18. Purnomo, H. (2013). Antropometri dan Aplikasinya Edisi Pertama. Yogyakarta: Graha Ilmu
  19. Puryati, D., Kuntadi, S., & Basuki, T. I. (2018). Manajemen Usaha Budidaya Tanaman Hortikultura dalam Polybag (Tanaman Hortikultura Modern). Dharma Bhakti Ekuitas, 3(1), 277–281
  20. Reilly, T. (2020). Introduction to Ergonomics. Ergonomics in Sport and Physical Activity
  21. Santoso, Singgih. (2001). Buku Latihan SPSS Statistik Non Parametrik. Jakarta: Elex Media Komputindo
  22. Simatupang, R. P., & Sirait, G. (2022). Perbaikan Postur Kerja Melalui Perancangan Ulang Desain Troli pada Aktivitas Manual Material Handling. Jurnal Comasie, 6(XX), 88–97
  23. Sokhibi, A., & Alifiana, M. A. (2019). Ergonomic Troly Design for Increasing Productivity in PG Jatibarang Brebes. 1–7
  24. Tarwaka, S., & Sudiajeng, L. (2004). Ergonomi untuk keselamatan, kesehatan kerja dan produktivitas. Uniba, Surakarta

Last update:

No citation recorded.

Last update: 2024-11-20 06:35:01

No citation recorded.