skip to main content

Corrosion of the metal parts of diesel engines in biodiesel-based fuels

1Ho Chi Minh city University of Transport, Ho Chi Minh City, Viet Nam

2Ho Chi Minh city University of Transport, Viet Nam

Received: 31 May 2018; Revised: 15 Mar 2019; Accepted: 5 Apr 2019; Available online: 15 Jul 2019; Published: 13 Jun 2019.
Editor(s): H Hadiyanto

Citation Format:
Cover Image
Abstract
Biodiesel, an environmentally-friendly bio-fuel, has been regarded as one of the most promising alternatives to fossil fuels whose use is rampant in the transportation sector. However, it is important that the corrosive effects of this fuel on engines are studied. This work reviews the corrosiveness that biodiesel exerts on various engine components, especially those made out of metals. First, an analysis of the corrosion mechanisms of metals exposed to biodiesel is provided. The conventional and advanced analysis methods will be applied to measure the level of corrosiveness in static immersion test, and to assess the formation of secondary products, if any, in biodiesel and any metal strips in contact with biodiesel-based fuel. The use of inhibitions to guard against corrosion will be mentioned. Lastly, several significant causes of metal corrosion, namely, the presence of dissolved oxygen and oxidation products, TAN change, a rise in dissolved water, the presence of metals, and the changes in biodiesel properties will also be presented. ©2019. CBIORE-IJRED. All rights reserved
Fulltext View|Download
Keywords: biodiesel; corrosion; metal; analysis techniques; inhibitor

Article Metrics:

  1. Al-Dawody M. F. & Bhatti S. K. (2013) Optimization Strategies to Reduce the Biodiesel NOx Effect in Diesel Engine with Experimental Verification. Energy Conversion and Management, 68, 96–104
  2. Almeida E. S., Flaysner M. P., Raquel M. F. S., Daniela D., Manuel G. H T., Eduardo M. R. & Rodrigo A. A. M. (2011) Behaviour of the Antioxidant Tert-Butylhydroquinone on the Storage Stability and Corrosive Character of Biodiesel. Fuel, 90 (11), 3480–3484
  3. Aquino, I.P, Hernandez, R.P.B., Chicoma, D.L., Pinto, H.P.F. and Aoki, I.V. (2012). Influence of Light, Temperature and Metallic Ions on Biodiesel Degradation and Corrosiveness to Copper and Brass. Fuel 102, 795–807
  4. Ashraful, A.M., Masjuki, H.H., Kalam,M.A., Rashedul, H.K., Sajjad, H. and Abedin, M.J. (2014). Influence of Anti-Corrosion Additive on the Performance, Emission and Engine Component Wear Characteristics of an IDI Diesel Engine Fueled with Palm Biodiesel. Energy Conversion and Management 87, 48–57
  5. Aysu, T. and Esim, N. (2016). Supercritical Liquefaction of Common Reed (Phragmites Australis) with Alkali Catalysts. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 38 (10),1336–1344
  6. Bereket, G, Pınarbaşı, A. and Öğretir, C. (2004). Benzimidazole-2-Tione and Benzoxazole-2-Tione Derivatives as Corrosion Inhibitors for Aluminium in Hydrochloric Acid. Anti-Corrosion Methods and Materials 51 (4), 282–93
  7. Beyene, H.D., Werkneh, A.A. and Ambaye, T.G.. (2018). Current Updates on Waste to Energy (WtE) Technologies: A Review. Renewable Energy Focus 24, 1–11
  8. Biodiesel Standards, EN 14214:2003. n.d. http://www.biofuelsystems.com/%0Aspecification.htm
  9. Boonyongmaneerat, Y., Chamaiporn, S., Ukrit, S., Sawalee, S. and Sittha, S. (2011). Investigation of Electrodeposited Ni-Based Coatings for Biodiesel Storage. Applied Energy 88 (3), 909–913
  10. Busca, G. (2010). Bases and Basic Materials in Chemical and Environmental Processes. Liquid versus Solid Basicity. Chemical Reviews 110 (4),2217–2249
  11. Cao, P., André, Y.T., Marc ,A. D., and Katie, M. (2007). Effect of Membrane Pore Size on the Performance of a Membrane Reactor for Biodiesel Production. Industrial & Engineering Chemistry Research 46 (1), 52–58
  12. Chew, K.V., Haseeb, A.S.M.A., Masjuki, H.H., Fazal, M.A., and Gupta, M. (2013). Corrosion of Magnesium and Aluminum in Palm Biodiesel: A Comparative Evaluation. Energy 57, 478–83
  13. Chew, T.L. and Bhatia, S. (2008). Catalytic Processes towards the Production of Biofuels in a Palm Oil and Oil Palm Biomass-Based Biorefinery. Bioresource Technology 99 (17), 7911–7922
  14. Ching, T. H., Yoza, B.A., Wang, R., Masutani, S., Donachie, S., Hihara,L. and Li, Q.X. (2016). Biodegradation of Biodiesel and Microbiologically Induced Corrosion of 1018 Steel by Moniliella Wahieum Y12. International Biodeterioration & Biodegradation 108, 122–126
  15. Cursaru, D.L, Brănoiu, G., Ramadan, I. and Miculescu, F. (2014). Degradation of Automotive Materials upon Exposure to Sunflower Biodiesel. Industrial Crops and Products 54, 149–158
  16. Diana C. & Sonia M. (2012). Corrosion Behaviour of Automotive Materials in Biodiesel from Sunflower Oil. REV. CHIM.(Bucharest), 63(9), 945-948
  17. Demirbas, A. (2017). Tomorrow’s Biofuels: Goals and Hopes. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 39 (7), 673–679
  18. Deyab, M A. (2016a). Corrosion Inhibition of Aluminum in Biodiesel by Ethanol Extracts of Rosemary Leaves. Journal of the Taiwan Institute of Chemical Engineers 58, 536–541
  19. Deyab, M A. (2016b). The Inhibition Activity of Butylated Hydroxytoluene towards Corrosion of Carbon Steel in Biodiesel Blend B20. Journal of the Taiwan Institute of Chemical Engineers 60, 369–375
  20. Dias, J. M, Alvim-Ferraz, M.C.M and Almeida, M.F. (2008). Comparison of the Performance of Different Homogeneous Alkali Catalysts during Transesterification of Waste and Virgin Oils and Evaluation of Biodiesel Quality. Fuel 87 (17–18), 3572–3578
  21. Díaz-Ballote, L, López-Sansores, J.F., Maldonado-López, L. and Garfias-Mesias.L.F. (2009). Corrosion Behavior of Aluminum Exposed to a Biodiesel. Electrochemistry Communications 11 (1), 41–44
  22. Domingos, A. K., Saad, E.B., Vechiatto, W.W.D., Wilhelm, H.M., and Ramos, L.P. (2007). The Influence of BHA, BHT and TBHQ on the Oxidation Stability of Soybean Oil Ethyl Esters (Biodiesel). Journal of the Brazilian Chemical Society 18 (2), 416–423
  23. Elsheikh, Y.A, Man, Z., Bustam, M.A., Yusup, S., and Wilfred. C.D. (2011). Brønsted Imidazolium Ionic Liquids: Synthesis and Comparison of Their Catalytic Activities as Pre-Catalyst for Biodiesel Production through Two Stage Process. Energy Conversion and Management 52 (2). 804–809
  24. Fazal, M.A, Haseeb,A. and Masjuki., H.H. (2010). Comparative Corrosive Characteristics of Petroleum Diesel and Palm Biodiesel for Automotive Materials. Fuel Processing Technology 91 (10), 1308–1315
  25. Fazal, M.A, Haseeb,A. and Masjuki., H.H. (2011a). Biodiesel Feasibility Study: An Evaluation of Material Compatibility; Performance; Emission and Engine Durability. Renewable and Sustainable Energy Reviews 15 (2), 1314–1324
  26. Fazal, M.A, Haseeb,A. and Masjuki., H.H. (2011). Effect of Different Corrosion Inhibitors on the Corrosion of Cast Iron in Palm Biodiesel. Fuel Processing Technology 92 (11), 2154–2159
  27. Fazal, M.A, Haseeb,A. and Masjuki., H.H. (2011). Effect of Temperature on the Corrosion Behavior of Mild Steel upon Exposure to Palm Biodiesel. Energy 36 (5), 3328–3334
  28. Fazal, M.A, Haseeb,A. and Masjuki., H.H. (2013). Corrosion Mechanism of Copper in Palm Biodiesel. Corrosion Science 67, 50–59
  29. Fazal, M.A, Haseeb,A. and Masjuki., H.H. (2014) A Critical Review on the Tribological Compatibility of Automotive Materials in Palm Biodiesel. Energy Conversion and Management 79, 180–186
  30. Felizardo, P., Correia, M.J., Raposo, I., Mendes, J.F.,Berkemeier, R., and Bordado, J.M. (2006). Production of Biodiesel from Waste Frying Oils. Waste Management 26 (5), 487–494
  31. Geller, D.P., Adams, T.T., Goodrum,J.W. and Pendergrass, J. (2010). Storage Stability of Poultry Fat and Diesel Fuel Mixtures: Part II–Chemical Properties. Fuel 89 (3), 792–796
  32. Ghadge, S.V., and Raheman, H. (2005). Biodiesel Production from Mahua (Madhuca Indica) Oil Having High Free Fatty Acids. Biomass and Bioenergy 28 (6), 601–605
  33. Gil, H., and Leygraf, C. (2007). Quantitative in Situ Analysis of Initial Atmospheric Corrosion of Copper Induced by Acetic Acid. Journal of The Electrochemical Society 154(5), C272–278
  34. Hancsók, J., Bubálik, M., Beck, A. and Baladincz, J. (2008). Development of Multifunctional Additives Based on Vegetable Oils for High Quality Diesel and Biodiesel. Chemical Engineering Research and Design 86 (7),793–799
  35. Haseeb, A.S.M.A., Fazal, M.A., Jahirul, M.I. and Masjuki, H.H. 2011. Compatibility of Automotive Materials in Biodiesel: A Review. Fuel 90 (3), 922–31
  36. Haseeb, A.S.M.A., Masjuki, H.H., Ann, L.J. and Fazal. M.A. (2010). Corrosion Characteristics of Copper and Leaded Bronze in Palm Biodiesel. Fuel Processing Technology 91 (3), 329–334
  37. Haseeb, A.S.M.A., Sia, S.Y., Fazal, M.A. and Masjuki. H.H.(2010). Effect of Temperature on Tribological Properties of Palm Biodiesel. Energy 35 (3), 1460–1464
  38. Hernández, R.P.B., Pászti, Z., de Melo, H.G. and Aoki, I.V. (2010). Chemical Characterization and Anticorrosion Properties of Corrosion Products Formed on Pure Copper in Synthetic Rainwater of Rio de Janeiro and São Paulo. Corrosion Science 52 (3), 826–837
  39. Hoang T. A. & Le V. V. (2017). The Performance of A Diesel Engine Fueled With Diesel Oil, Biodiesel and Preheated Coconut Oil. International Journal of Renewable Energy Development, 6 (1), 1-7
  40. Hoang A. T. (2018a) Waste heat recovery from diesel engines based on Organic Rankine Cycle. Applied Energy, 231, 138–166
  41. Hoang A. T. (2018b) Prediction of the density and viscosity of biodiesel and the influence of biodiesel properties on a diesel engine fuel supply system. Journal of Marine Engineering & Technology. https://doi.org/10.1080/20464177.2018.1532734
  42. Hoang A. T. & Pham V. V. (2018c) A review on fuels used for marine diesel engines. Journal of Mechanical Engineering Research & Developments, 41(4), 22–32
  43. Hoang A. T. (2019) Experimental study on spray and emission characteristics of a diesel engine fueled with preheated bio-oils and diesel fuel. Energy, 171, 795-808
  44. Hoang A. T., Tran V. D., Dong V. H. & Le A. T. (2019a) An experimental analysis on physical properties and spray characteristics of an ultrasound-assisted emulsion of ultra-low-sulphur diesel and Jatropha-based biodiesel. Journal of Marine Engineering & Technology. https://doi.org/10.1080/20464177.2019.1595355
  45. Hoang A. T. & Tran V. D. (2019b) Experimental analysis on the ultrasound-based mixing technique applied to ultra-low sulphur diesel and bio-oils. International Journal on Advanced Science, Engineering and Information Technology, 9(1), 307–313
  46. Hoang, A. T., Le, V. V., Pham V. V. & Tham B. C. (2019c) An investigation of deposit formation in the injector, spray characteristics, and performance of a diesel engine fueled with preheated vegetable oil and diesel fuel. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. https://doi.org/10.1080/15567036.2019.1582731
  47. Hoang, A. T. & Le A. T. (2019d) A review on deposit formation in the injector of diesel engines running on biodiesel. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41(5), 584-599
  48. Hoang, A. T., Le, A. T. & Pham, V. V. (2019e) A core correlation of spray characteristics, deposit formation, and combustion of a high-speed diesel engine fueled with Jatropha oil and diesel fuel. Fuel, 244, 159–175
  49. Hoang, A. T. & Le A. T. (2019f) Trilateral correlation of spray characteristics, combustion parameters, and deposit formation in the injector hole of a diesel engine running on preheated Jatropha oil and fossil diesel fuel. Biofuel Research Journal, 6(1), 909–919
  50. Hu, E., Xu, Y., Hu, X., Pan, L. and Jiang,S. (2012). Corrosion Behaviors of Metals in Biodiesel from Rapeseed Oil and Methanol. Renewable Energy 37 (1), 371–378
  51. Ilham, Z. (2009). Analysis of Parameters for Fatty Acid Methyl Esters Production from Refined Palm Oil for Use as Biodiesel in the Single-and Two-Stage Processes. Malaysian Journal of Biochemistry and Molecular Biology 17 (1), 5–9
  52. Jakeria, M.R.,Fazal, M.A. and Haseeb,A.S.M.A. (2014). Influence of Different Factors on the Stability of Biodiesel: A Review. Renewable and Sustainable Energy Reviews 30, 154–163
  53. Jakeria, M.R., Fazal, M.A. and Haseeb, A.S.M.A. (2015). Effect of Corrosion Inhibitors on Corrosiveness of Palm Biodiesel. Corrosion Engineering, Science and Technology 50 (1), 56–62
  54. Ji, J., Wang, J., Li, Y., Yu, Y. and Xu, Z. (2006). Preparation of Biodiesel with the Help of Ultrasonic and Hydrodynamic Cavitation. Ultrasonics 44, 411–414
  55. Jin, D., Zhou, X., Wu, P., Jiang, L. and Ge, H. (2015). Corrosion Behavior of ASTM 1045 Mild Steel in Palm Biodiesel. Renewable Energy 81, 457–463
  56. Kamiński, J. and Kurzydłowski, K.J. (2008). Use of Impedance Spectroscopy to Testing Corrosion Resistance of Carbon Steel and Stainless Steel in Water-Biodiesel Configuration. Journal of Corrosion Measurements 6, 1–5
  57. Kaul, S., Saxena, R.C., Kumar, A., Negi, M.S., Bhatnagar, A.K., Goyal, H.B., and Gupta,A.K. (2007). Corrosion Behavior of Biodiesel from Seed Oils of Indian Origin on Diesel Engine Parts. Fuel Processing Technology, 88 (3), 303–307
  58. Khan, O., Khan, M.E., Yadav, A.K. and Sharma,D. (2017). The Ultrasonic-Assisted Optimization of Biodiesel Production from Eucalyptus Oil. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 39 (13),1323–1331
  59. Kouzu, M., Kasuno,T., Tajika,M., Sugimoto,Y., Yamanaka, S. and Hidaka, J. (2008). Calcium Oxide as a Solid Base Catalyst for Transesterification of Soybean Oil and Its Application to Biodiesel Production. Fuel 87 (12), 2798–2806
  60. Li, Y., Qiu, F., Yang, D., Li,X. and Sun, P. (2011). Preparation, Characterization and Application of Heterogeneous Solid Base Catalyst for Biodiesel Production from Soybean Oil. Biomass and Bioenergy 35 (7), 2787–2795
  61. Maru, M.M., Lucchese, M.M., Legnani, C., Quirino, W.G., Balbo,A., Aranha, I.B., Costa, L.T., Vilani, C., de Sena, L.A. and Damasceno, J.C.. (2009). Biodiesel Compatibility with Carbon Steel and HDPE Parts. Fuel Processing Technology 90 (9), 1175–1182
  62. Moradi, G.R., Dehghani, S., Khosravian, F., and Arjmandzadeh, A. (2013). The Optimized Operational Conditions for Biodiesel Production from Soybean Oil and Application of Artificial Neural Networks for Estimation of the Biodiesel Yield. Renewable Energy 50, 915–920
  63. Nagy, M., Foston, M. and Ragauskas, A.J. (2009). Rapid Quantitative Analytical Tool for Characterizing the Preparation of Biodiesel. The Journal of Physical Chemistry A 114 (11), 3883–3887
  64. Pantoja, S.S., da Conceição, L.R.V., da Costa, C.E.F., Zamian, J.R. and da Rocha Filho,G.N. (2013). Oxidative Stability of Biodiesels Produced from Vegetable Oils Having Different Degrees of Unsaturation. Energy Conversion and Management 74, 293–298
  65. Patil, P.D., and Deng, S. (2009). Optimization of Biodiesel Production from Edible and Non-Edible Vegetable Oils. Fuel 88 (7), 1302–1306
  66. Pham, X.D., Hoang, A.T., Nguyen, D.N. (2018). A Study on the Effect of the Change of Tempering Temperature on the Microstructure Transformation of Cu-Ni-Sn Alloy. International Journal of Mechanical & Mechatronics Engineering, 18 (4), 27–34
  67. Prieto, L.E.G., Sorichetti, P.A. and Romano,S.D. (2008). Electric Properties of Biodiesel in the Range from 20 Hz to 20 MHz. Comparison with Diesel Fossil Fuel. International Journal of Hydrogen Energy 33 (13), 3531–3537
  68. Qiu, F., Li, Y., Yang, D., Li,X., and Sun, P. (2011). Biodiesel Production from Mixed Soybean Oil and Rapeseed Oil. Applied Energy 88 (6), 2050–2055
  69. Ragauskas, Arthur J. 2014. Materials for Biofuels. Vol. 4. World Scientific
  70. Rajasekar, A., Maruthamuthu, S., Palaniswamy, N. and Rajendran, A. (2007). Biodegradation of Corrosion Inhibitors and Their Influence on Petroleum Product Pipeline. Microbiological Research 162 (4), 355–368
  71. Rashid, U., Bhatti, S.G., Ansari, T.M.,Yunus, R. and Ibrahim, M. (2016). Biodiesel Production from Cannabis Sativa Oil from Pakistan. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 38 (6), 865–875
  72. Rashid, U., Anwar,F. and Knothe, G. (2009). Evaluation of Biodiesel Obtained from Cottonseed Oil. Fuel Processing Technology 90 (9), 1157–1163
  73. Roschat, W., Siritanon,T., Yoosuk,B. and Promarak, V. (2016). Biodiesel Production from Palm Oil Using Hydrated Lime-Derived CaO as a Low-Cost Basic Heterogeneous Catalyst. Energy Conversion and Management 108, 459–467
  74. Samart, C., Chaiya, C. and Reubroycharoen, P. (2010). Biodiesel Production by Methanolysis of Soybean Oil Using Calcium Supported on Mesoporous Silica Catalyst. Energy Conversion and Management 51 (7), 1428–1431
  75. Santana, P. M. B., Meira, M. and Tentardini, E.K. (2015). Effects of Adding Some Natural Substances to Biodiesel to Control Its Effect on Carbon Steel Corrosion. Materials Research 18, 164–169
  76. Saravana K.T , Abu S. A. & Farid N. A. (2016). Impact of metals on corrosive behavior of biodiesel-diesel-ethanol (BDE) alternative fuel. Renewable Energy, 94, 1-9
  77. Sgroi, M., Bollito, G., Saracco, G. and Specchia, S. (2005). BIOFEAT: Biodiesel Fuel Processor for a Vehicle Fuel Cell Auxiliary Power Unit: Study of the Feed System. Journal of Power Sources 149, 8–14
  78. Sharma, Y.C., Singh,B. and Korstad, J. (2011). Advancements in Solid Acid Catalysts for Ecofriendly and Economically Viable Synthesis of Biodiesel. Biofuels, Bioproducts and Biorefining 5 (1), 69–92
  79. Shin, H-Y., Lim, S-M., Kang, S.C. and Bae, S.Y. (2012). Statistical Optimization for Biodiesel Production from Rapeseed Oil via Transesterificaion in Supercritical Methanol. Fuel Processing Technology 98, 1–5
  80. Singh, B., Korstad, J. and Sharma, Y.C. (2012). A Critical Review on Corrosion of Compression Ignition (CI) Engine Parts by Biodiesel and Biodiesel Blends and Its Inhibition. Renewable and Sustainable Energy Reviews 16 (5), 3401–3408
  81. Sorate, K.A, and Bhale. P.V.(2013). Impact of Biodiesel on Fuel System Materials Durability. Journal of Scientific & Industrial Research, 72, 48-57
  82. Su, F., and Guo, Y. (2014). Advancements in Solid Acid Catalysts for Biodiesel Production. Green Chemistry 16 (6), 2934–2957
  83. Sundus, F., Fazal, M.A. and Masjuki, H.H. (2017). Tribology with Biodiesel: A Study on Enhancing Biodiesel Stability and Its Fuel Properties. Renewable and Sustainable Energy Reviews 70, 399–412
  84. Takase, M., Pappoe, A.N.M., Afrifa, E.A. and Miyittah. M. (2018). High Performance Heterogeneous Catalyst for Biodiesel Production from Non-Edible Oil. Renewable Energy Focus 25, 24–30
  85. Tan, Y. H., Abdullah, M.O., Nolasco-Hipolito, C., and Taufiq-Yap, Y.H. 2015. Waste Ostrich-and Chicken-Eggshells as Heterogeneous Base Catalyst for Biodiesel Production from Used Cooking Oil: Catalyst Characterization and Biodiesel Yield Performance. Applied Energy 160, 58–70
  86. Tashtoush, G.M., Al-Widyan, M.I. and Al-Jarrah., M.M. (2004). Experimental Study on Evaluation and Optimization of Conversion of Waste Animal Fat into Biodiesel. Energy Conversion and Management 45 (17), 2697–2711
  87. Thirugnanasambandham, K., Shine,K., Aziz, H.A. and Gimenes, M.L. (2017). Biodiesel Synthesis from Waste Oil Using Novel Microwave Technique: Response Surface Modeling and Optimization. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 39 (7), 636–642
  88. Tupufia, S.C., Jeon, Y.J., Marquis, C., Adesina, A.A. and Rogers, P.L. (2013). Enzymatic Conversion of Coconut Oil for Biodiesel Production. Fuel Processing Technology 106, 721–726
  89. Wang, W., Jenkins,P.E. and Ren, Z. (2012). Electrochemical Corrosion of Carbon Steel Exposed to Biodiesel/simulated Seawater Mixture. Corrosion Science 57, 215–219
  90. Xia, W. (2016). Biodiesel as a Renewable Collector for Coal Flotation in the Future. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 38 (13) ,1938–1943
  91. Zagonel, G.F, Peralta-Zamora,P.G. and Ramos, L.P. (2002). Production of Ethyl Esters from Crude Soybean Oil: Optimization of Reaction Yields Using a 23 Experimental Design and Development of a New Analytical Strategy for Reaction Control. In Preprints Symp: Am Chem Soc Div Fuel Chem, 47, 363–364
  92. Zuleta, E.C., Baena,L., Rios, L.A. and Calderón, J.A. (2012). The Oxidative Stability of Biodiesel and Its Impact on the Deterioration of Metallic and Polymeric Materials:A Review. Journal of the Brazilian Chemical Society 23 (12), 2159–2175

Last update:

  1. Influence of axenic culture of Bacillus clausii and mixed culture on biofilm formation, carbon steel corrosion, and methyl ester degradation in B30 storage tank system

    Christian Aslan, Nadia Ijkri Aulia, Hary Devianto, Ardiyan Harimawan. Journal of Environmental Chemical Engineering, 10 (3), 2022. doi: 10.1016/j.jece.2022.108013
  2. Catalyst and Elemental Analysis Involving Biodiesel from Various Feedstocks

    Ines Simbi, Uyiosa Osagie Aigbe, Oluwaseun Oyekola, Otolorin Adelaja Osibote. Catalysts, 11 (8), 2021. doi: 10.3390/catal11080971
  3. Digitalization and the Impacts of COVID-19 on the Aviation Industry

    Nam Hai Vu, Minh Le Bui, Hai Thanh Truong, Dat Anh Le, Ha Pham Hai Nguyen. Advances in Hospitality, Tourism, and the Services Industry, 2022. doi: 10.4018/978-1-6684-2319-6.ch008
  4. Effects of CeO 2 nanoparticles on engine features, tribology behaviors, and environment

    Thanh Tuan Le, Inbanaathan Papla Venugopal, Thanh Hai Truong, Dao Nam Cao, Huu Cuong Le, Xuan Phuong Nguyen. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 45 (3), 2023. doi: 10.1080/15567036.2023.2231387
  5. Simulation of wear map for biodiesel interacted automotive materials

    S Y Cetin, M A Maleque, H H Masjuki. IOP Conference Series: Materials Science and Engineering, 1244 (1), 2022. doi: 10.1088/1757-899X/1244/1/012008
  6. Comparative analysis of filterability behavior of B30 and B40 biodiesel blends on various porosity and dimension of fuel filter

    Yogi Pramudito, Nur Allif Fathurrahman, Ahmad Syihan Auzani, Cahyo Setyo Wibowo, Riesta Anggarani, Ariana Soemanto, Bambang Sugiarto. International Journal of Renewable Energy Development, 12 (4), 2023. doi: 10.14710/ijred.2023.52801
  7. The Influence of NaCl dissolved on biodiesel of used cooking oil on performance and its degradation of main components of diesel engine

    Aguk Zuhdi Muhammad Fathallah, Fransico Pinto. IOP Conference Series: Earth and Environmental Science, 972 (1), 2022. doi: 10.1088/1755-1315/972/1/012030
  8. Technical assessment of biodiesel storage tank; A corrosion case study

    Leily Nurul Komariah, Susila Arita, Baikuni E. Prianda, Tri K. Dewi. Journal of King Saud University - Engineering Sciences, 35 (3), 2023. doi: 10.1016/j.jksues.2021.03.016
  9. Effect of corrosion rates of preheated Schinzochytrium sp. microalgae biodiesel on metallic components of a diesel engine

    Babalola Aisosa Oni, Samuel Eshorame Sanni, Benjamin O. Ezurike, Emmanuel Emeka Okoro. Alexandria Engineering Journal, 61 (10), 2022. doi: 10.1016/j.aej.2022.01.005
  10. Corrosion Rate Prediction in Oil and Gas Pipelines Based on Multiphase Flow Modelling

    Martins Obaseki, Peter B. Alfred, Paul T. Elijah, Silas Oseme Okuma. International Journal of Engineering Research in Africa, 67 , 2023. doi: 10.4028/p-brqaI1
  11. A comprehensive review on the use of biodiesel for diesel engines

    Van Giao Nguyen, Minh Tuan Pham, Nguyen Viet Linh Le, Huu Cuong Le, Thanh Hai Truong, Dao Nam Cao. International Journal of Renewable Energy Development, 12 (4), 2023. doi: 10.14710/ijred.2023.54612
  12. Effects of CeO2 nanoparticles on engine features, tribology behaviors, and environment

    Thanh Tuan Le, Inbanaathan Papla Venugopal, Thanh Hai Truong, Dao Nam Cao, Huu Cuong Le, Xuan Phuong Nguyen. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 45 (3), 2023. doi: 10.1080/15567036.2023.2231387
  13. Corrosion Effect of Biodiesel-Diesel Blend on Different Metals/Alloy as Automotive Components Materials

    Ancaelena Eliza Sterpu, Bianca Georgiana Simedrea, Timur Vasile Chis, Olga Valerica Săpunaru. Fuels, 5 (1), 2024. doi: 10.3390/fuels5010002
  14. An Investigation on Corrosion Behaviour and Mechanical Properties of Aluminium in Diesel Palm Kernel Biodiesel and Ethanol Environments

    Bijoy Kumar Deb, Prasun Chakraborti. Transactions of the Indian Institute of Metals, 77 (3), 2024. doi: 10.1007/s12666-023-03153-3
  15. Performance and emission characteristics of diesel engines running on gaseous fuels in dual-fuel mode

    Van Nhanh Nguyen, Swarup Kumar Nayak, Huu Son Le, Jerzy Kowalski, Balakrishnan Deepanraj, Xuan Quang Duong, Thanh Hai Truong, Viet Dung Tran, Dao Nam Cao, Phuoc Quy Phong Nguyen. International Journal of Hydrogen Energy, 49 , 2024. doi: 10.1016/j.ijhydene.2023.09.130
  16. Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering

    Md Abdul Maleque, Masjuki Hassan, Safa Yusuf Cetin, Ihsan Efeoglu, Md Mustafizur Rahman. Lecture Notes in Mechanical Engineering, 2023. doi: 10.1007/978-981-19-9509-5_28
  17. Interactions between Used Cooking Oil Biodiesel Blends and Elastomer Materials in the Diesel Engine

    Zhi-yuan Hu, Jun Luo, Zhang-ying Lu, Zhuo Wang, Pi-qiang Tan, Di-ming Lou. ACS Omega, 6 (7), 2021. doi: 10.1021/acsomega.0c06254

Last update: 2024-03-28 08:17:07

  1. Experimental research on the impact of anchor-cable tensions in mooring ship at Vung Tau Anchorage Area

    Nguyen X.P.. International Journal on Advanced Science, Engineering and Information Technology, 9 (6), 2019. doi: 10.18517/ijaseit.9.6.9946