skip to main content

A Novel Integration of PCM with Wind-Catcher Skin Material in Order to Increase Heat Transfer Rate

Department of Energy, Material & Energy Research Center, Tehran, Iran, Islamic Republic of

Published: 2 Feb 2019.
Editor(s): H Hadiyanto

Citation Format:
Cover Image
Abstract

In this research, a comprehensive simulation study including 3-D Dynamic time-dependent has been performed for Phase Change Materials (PCMs) applicant as a thermal storage integrated with the wind-catcher-wall in order to reduce the temperature difference (As a sustainable cooling method) in the MATLAB open-source–code software. By means of 3-D Dynamic time-dependent, as a final finding, the temperature drop (Cooling purpose) was obtained 25 degrees at about 7 working hours. Passive cooling can be considered as a viable and attractive strategy for the sustainable concept, opposed to mitigation of energy consumption and Green House Gas (GHG) simultaneously. One of the traditional-old-age famous passive cooling systems that are still being applied nowadays is wind-catcher as an energy system. The wind catcher sustain natural ventilation and cooling in buildings through wind-driven airflow as well as temperature difference. Windcatchers can save the electrical energy used to provide thermal comfort during the hot climate in summer case of the year, especially during the peak hours contributed to energy carriers’ consumptions. In this study, by proposing a new design of the windcatchers, attempts have been made to improve the energy efficiency of passive cooling methods. Besides, the application of new efficient methods for the purpose of thermal energy storage (PCM) as a sub-system is a chosen method to increase energy efficiency. By applying energy storage systems in addition to increase system energy performance and reliability, the target of reducing energy consumption is achieved.

© 2019. CBIORE-IJRED. All rights reserved

Article History: Received May 18th 2018; Received in revised form October 5th  2018; Accepted January 5th 2019; Available online

How to Cite This Article: Seidabadi, L., Ghadamian, H, and Aminy, M. (2019) A Novel Integration of PCM with Wind-Catcher Skin Material in Order to Increase Heat Transfer Rate. Int. Journal of Renewable Energy Development, 8(1), 1-6.

https://doi.org/10.14710/ijred.8.1.1-6

Fulltext View|Download
Keywords: Passive Cooling; Temperature Drop; Analytic Mathematical Model; 3-D Dynamic Time-Dependent

Article Metrics:

  1. Agyenim F., Hewitt N., Eames P. & Smyth M. (2010) A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS). Renewable and Sustainable Energy Reviews, 14, 615–628
  2. Bahadori M. (1985) An improved design of wind towers for natural ventilation and passive cooling. Solar Energy Journal, 35, 119-129
  3. Bahadori M. & Pakzad A. (2002) Performance evaluation of new designs of wind towers. ASME Fluids Engineering Division Summer Meeting; Proceedings of ASME FEDSMí02
  4. Bahadori M. & Dehghani-sanij A. (2014) Wind Towers: Architecture, Climate and Sustainability, 1st Edn. Springer, London, England
  5. Belhamadia Y., Kane A. & Fortin A. (2012) An enhanced mathematical model for phase change problems with natural convection. International Journal of Numerical Analysis and Modeling, 3, 192-206
  6. Cabeza L., Castell A., Barreneche C., de Gracia A. & Fernández A. (2011) Materials used as PCM in thermal energy storage in buildings: A review. Renewable and Sustainable Energy Reviews, 15, 1675–1695
  7. Chang S., Wi S., Jeong S. & Kim S. (2016) Thermal performance evaluation of macro-packed phase change materials (PCMs) using heat transfer analysis device. Energy and building Journal, 117, 120-127
  8. Chernousov A. & Chan B. (2016) Numerical simulation of thermal mass enhanced envelopes for office buildings in subtropical climate zones. Energy and building Journal, 118, 214-225
  9. Dehghani-sanij A., Soltani M. & Raahemifar K. (2015) A new design of wind tower for passive ventilation in buildings to reduce energy consumption in windy regions. Renewable and Sustainable Energy Reviews, 42, 182–195
  10. Eslamnezhad H. & Rahimi A. B. (2016) Enhance heat transfer for phase-change materials in triplex tube heat exchanger with selected arrangements of fins. Applied Thermal Energy, 113, 813-821
  11. Fang X., Fan L., Ding Q., Yao X., Wu Y. & Hou J. (2014) Thermal energy storage performance of paraffin-based composite phase change materials filled with hexagonal boron nitride Nanosheets. Energy Conversion and Management, 80, 103–109
  12. Ghadamian H., Ghadimi M., Shakouri M., Moghadasi M. & Moghadasi M (2012) Analytical solution for energy modeling of double skin facades building, Energy and Buildings, 50, 158-165
  13. Jamekhorshid A., Sadrameli S. & Farid M. (2014) A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium. Renewable and Sustainable Energy Reviews, 31, 531–542
  14. Jeong S. G., Lee J.H, Seo J. & Kim S. (2014) Thermal performance evaluation of Bio-based shape stabilized PCM with boron nitride for energy saving. Int. Journal of Heat and Mass Transfer, 71, 245–250
  15. Kamal M.A. (2012) An Overview of Passive Cooling Techniques in Buildings: Design Concepts and Architectural Interventions. Journal of Civil Engineering & Architecture, 55, 84-97
  16. Mavrigiannaki A. & Ampatzi E. (2016) Latent heat storage in building elements: A systematic review on properties and contextual performance factors. Renewable and Sustainable Energy Reviews, 60, 852–866
  17. Naciri M., Aggour M. & Ahmed W. A. (2017) Wind energy storage by pumped hydro station. Journal of Energy Systems, 1(1), 32-42
  18. Samuel L., Nagendra S. & Maiya M. P. (2013) Passive alternatives to mechanical air conditioning of building: A review. Journal of Building and Environment, 66, 54-64
  19. Sun Y., Guan Z. & Hooman K. (2017) A review on the performance evaluation of natural draft dry cooling towers and possible improvements via inlet air spray cooling. Renewable and Sustainable Energy Reviews, 79, 618-637
  20. Waqas A., Ji J., Ali M. & Alvi J. Z. (2018) Effectiveness of the phase change material-based thermal energy storage integrated with the conventional cooling systems of the buildings – A review. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, First Published 24 Jan 2018

Last update:

  1. Passive cooling and natural ventilation by the windcatcher: An experimental and simulation study of indoor air quality, thermal comfort and passive cooling power

    Payam Nejat, M. Salim Ferwati, John Calautit, Ali Ghahramani, Mohammadamin Sheikhshahrokhdehkordi. Journal of Building Engineering, 2021. doi: 10.1016/j.jobe.2021.102436
  2. Passive cooling and natural ventilation by the windcatcher (Badgir): An experimental and simulation study of indoor air quality, thermal comfort and passive cooling power

    Payam Nejat, M. Salim Ferwati, John Calautit, Ali Ghahramani, Mohammadamin Sheikhshahrokhdehkordi. Journal of Building Engineering, 41 , 2021. doi: 10.1016/j.jobe.2021.102436
  3. Simulation and experimental investigation of an organic phase change material-based air-cooling system for industrial applications in the hot climate

    Leila Seidabadi, Hossein Ghadamian, Mohammad Aminy, Meisam Moghadasi, Shahriar Ghahremanian. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 44 (1), 2022. doi: 10.1080/15567036.2022.2050965
  4. Natural ventilation by windcatcher (Badgir): A review on the impacts of geometry, microclimate and macroclimate

    Fatemeh Jomehzadeh, Hasanen Mohammed Hussen, John Kaiser Calautit, Payam Nejat, M. Salim Ferwati. Energy and Buildings, 226 , 2020. doi: 10.1016/j.enbuild.2020.110396
  5. Windcatchers and their applications in contemporary architecture

    Parham Kheirkhah Sangdeh, Nazanin Nasrollahi. Energy and Built Environment, 3 (1), 2022. doi: 10.1016/j.enbenv.2020.10.005
  6. Numerical study on natural ventilation of the wind tower: Effects of combining with different window configurations in a low-rise house

    Yan Wu, Naiping Gao, Jianlei Niu, Jianbin Zang, Qiang Cao. Building and Environment, 188 , 2021. doi: 10.1016/j.buildenv.2020.107450
  7. Natural ventilation as a passive cooling strategy for multi-story buildings: analytic vertical skycourt formations

    Rasha A. Ali, Naglaa A. Megahed, Merhan M. Shahda, Asmaa M. Hassan. City, Territory and Architecture, 10 (1), 2023. doi: 10.1186/s40410-023-00212-6

Last update: 2024-03-28 05:38:18

  1. Natural ventilation by windcatcher (Badgir): A review on the impacts of geometry, microclimate and macroclimate

    Fatemeh Jomehzadeh, Hasanen Mohammed Hussen, John Kaiser Calautit, Payam Nejat, M. Salim Ferwati. Energy and Buildings, 226 , 2020. doi: 10.1016/j.enbuild.2020.110396
  2. Numerical study on natural ventilation of the wind tower: Effects of combining with different window configurations in a low-rise house

    Yan Wu, Naiping Gao, Jianlei Niu, Jianbin Zang, Qiang Cao. Building and Environment, 188 , 2021. doi: 10.1016/j.buildenv.2020.107450