1Department of Chemistry, Faculty of Mathematics and Natural Sciences and Health, Universitas Muhammadiyah Riau, Pekanbaru, Indonesia
2Post Graduate, University of Riau, Pekanbaru, 28293, Riau, Indonesia
BibTex Citation Data :
@article{JKSA50891, author = {Sri Siregar and Prasetya Prasetya and Norramizawati Norramizawati and Marlian Marlian and Aulia Rizki Ramadhanti}, title = {Titanium Dioxide (TiO2) Modified Bentonite for Photodegradation in Methylene Blue Dye}, journal = {Jurnal Kimia Sains dan Aplikasi}, volume = {26}, number = {4}, year = {2023}, keywords = {Adsorption; photocatalyst; bentonite-TiO2; methylene blue}, abstract = { Dye is one of the waste waters, which will be a problem if the content is excessive in the water. Modifying bentonite with titanium dioxide (TiO 2 ) as a photocatalyst for removal of dye waste. In this study, composite synthesis was carried out by mixing bentonite and TiO 2 suspensions. The mass of bentonite is 20 g, and the mass variations of TiO 2 are 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, and 100%. The resulting composite was heated using a furnace at 550°C for 5 hours. Bentonite-TiO 2 composites were characterized using Fourier Transform Infrared, X-Ray Diffraction, and Scanning Electron Microscope-Energy Dispersive X-Ray (SEM-EDX). Photodegradation of methylene blue dye with bentonite-TiO 2 was carried out by varying the mass of bentonite-TiO 2 photocatalysts (0.02, 0.04, 0.06, 0.08 g); variations in pH (1, 3, 5, 7, and 9), and variations in UV irradiation time (30, 60, 90, and 120 minutes). The results of characterization with FTIR showed the presence of Ti-O-Ti vibrations at wavenumber 1419 cm -1 and Si-O-Ti at wave numbers 780 cm -1 and 799 cm -1 . Characterization of 20% bentonite-TiO 2 by XRD showed rutile, anatase, and montmorillonite phases. The SEM-EDX bentonite-TiO 2 characterization results produced some small particles with a layered structure with TiO 2 particles clumping and still in the form of agglomerates, and the EDX results showed the chemical composition of Si and Ti. The results of photodegradation showed that the best activity for the bentonite-TiO 2 composite occurred in photocatalyst BT-20% with a mass of 0.08 g, pH 1, and UV irradiation time of 120 minutes with methylene blue 99.942% degraded. }, issn = {2597-9914}, pages = {143--150} doi = {10.14710/jksa.26.4.143-150}, url = {https://ejournal.undip.ac.id/index.php/ksa/article/view/50891} }
Refworks Citation Data :
Dye is one of the waste waters, which will be a problem if the content is excessive in the water. Modifying bentonite with titanium dioxide (TiO2) as a photocatalyst for removal of dye waste. In this study, composite synthesis was carried out by mixing bentonite and TiO2 suspensions. The mass of bentonite is 20 g, and the mass variations of TiO2 are 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, and 100%. The resulting composite was heated using a furnace at 550°C for 5 hours. Bentonite-TiO2 composites were characterized using Fourier Transform Infrared, X-Ray Diffraction, and Scanning Electron Microscope-Energy Dispersive X-Ray (SEM-EDX). Photodegradation of methylene blue dye with bentonite-TiO2 was carried out by varying the mass of bentonite-TiO2 photocatalysts (0.02, 0.04, 0.06, 0.08 g); variations in pH (1, 3, 5, 7, and 9), and variations in UV irradiation time (30, 60, 90, and 120 minutes). The results of characterization with FTIR showed the presence of Ti-O-Ti vibrations at wavenumber 1419 cm-1 and Si-O-Ti at wave numbers 780 cm-1 and 799 cm-1. Characterization of 20% bentonite-TiO2 by XRD showed rutile, anatase, and montmorillonite phases. The SEM-EDX bentonite-TiO2 characterization results produced some small particles with a layered structure with TiO2 particles clumping and still in the form of agglomerates, and the EDX results showed the chemical composition of Si and Ti. The results of photodegradation showed that the best activity for the bentonite-TiO2 composite occurred in photocatalyst BT-20% with a mass of 0.08 g, pH 1, and UV irradiation time of 120 minutes with methylene blue 99.942% degraded.
Article Metrics:
Last update:
Recent Advances in Magnetic Feˣ⁺/TiO₂ Microfibers for Wastewater Treatment as Climate Change Mitigation
Designing A Visible Light Driven TiO2-Based Photocatalyst by Doping and Co-Doping with Niobium (Nb) and Boron (B)
Recent advances in the development of effective TiO2-based photocatalysts immobilized on floating substrates: A mini review
Last update: 2024-12-26 01:58:38
As an article writer, the author has the right to use their articles for various purposes, including use by institutions that employ authors or institutions that provide funding for research. Author rights are granted without special permission.
Author who publishes a paper at JKSA has the broad right to use their work for teaching and scientific purposes without the need to ask permission, including: used for (i) teaching in the author's class or institution, (ii) presentation at meetings or conferences and distributing copies to participants ; (iii) training conducted by the author or author's institution; (iv) distribution to colleagues for research use; (v) use in the compilation of subsequent authors' works; (vi) inclusion in a thesis or dissertation; (vi) reuse of part of the article in another work (with citation); (vii) preparation of derivative works (with citation); (viii) voluntary posting on open websites operated by authors or author institutions for scientific purposes (follow the CC BY-SA License).
Authors and readers can copy and redistribute material in any media or format, and mix, modify, and build material for any purpose but they must provide appropriate credit (provide article citation or content), providing links to the license, and indicate if there are changes.
The authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Kimia Sains dan Aplikasi (JKSA). Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations.
Reproduce any part of this journal, its storage in the database or its transmission by all forms or media is permitted does not need for written permission from JKSA. However, it should be cited as an honor in academic manners
JKSA and the Chemistry Department of Diponegoro University and the Editor make every effort to ensure that there are no data, opinions, or false or misleading statements published in JKSA. However, the content of the article is the sole and exclusive responsibility of each author.
The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form - Indonesian] [Copyright Transfer Form - English]. The copyright form should be signed originally and send to the Editor in the form of printed letters, scanned documents sent via email or fax.
Adi Darmawan, Ph.D (Editor in Chief)
Editor in chief of Jurnal Kimia Sains dan Aplikasi (JKSA)
Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University
Visitor: View My Stats
Jurnal Kimia Sains dan Aplikasi is indexed in:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
