THE EFFECTS OF WATER ADDITION AND STEAMING DURATION ON STARCH COMPOSITION OF WHEAT POLLARD

Cahya Setya Utama; Bambang Sulistiyanto; Sri Kismiati

doi:10.14710/reaktor.17.4.221-225

DOI: https://doi.org/10.14710/reaktor.17.4.221-225

THE EFFECTS OF WATER ADDITION AND STEAMING DURATION ON STARCH COMPOSITION OF WHEAT POLLARD

*Cahya Setya Utama

- Departement of Animal Science, Faculty of Animal and Agricultural Sciences, Diponegoro University Jl. Prof. Soedarto, SH, Tembalang, Semarang 50275

Bambang Sulistiyanto - Departement of Animal Science, Faculty of Animal and Agricultural Sciences, Diponegoro University Jl. Prof. Soedarto, SH, Tembalang, Semarang 50275

Sri Kismiati - Departement of Animal Science, Faculty of Animal and Agricultural Sciences, Diponegoro University Jl. Prof. Soedarto, SH, Tembalang, Semarang 50275

Received: 19 Sep 2017; Published: 19 Feb 2018.

BibTex Citation Data :

@article{Reaktor16025,
    author = {Cahya Utama and Bambang Sulistiyanto and Sri Kismiati},
    title = {THE EFFECTS OF WATER ADDITION AND STEAMING DURATION ON STARCH COMPOSITION OF WHEAT POLLARD},
    journal = {Reaktor},
  volume = {17},
    number = {4},
    year = {2018},
    keywords = {},
    abstract = {  Abstract         The objective of the study was to determine the effects of water addition and steaming duration on starch composition of wheat pollard including starch, amylose, amylopectin and starch resistant. Water was added towheat pollard (0, 30 and 60%) and autoclaved at 121°  C   (15 and 30 min) afterward. The pollard then was oven-dry at 70°C.     The study used a complete randomized design of      3x2 factorial with 3 replications. The addition of water and steaming duration     showed a   very significant (p<0.001) impact on the amylose and starch resistant parameters but     not the starch and amylopectin. The addition of water increased the starch content from 38.71 + 0.10%. The starch content of a 15-min autoclave was higher (44.54 + 11.34%) than that of a 30-min (43.43 + 11.16%).  The amylose levels decreased with addition of water and duration of autoclave. The amylose decrease from 5.23 + 0.10%      to     4.03 + 0.32%. Addition of water increased the amylopectin level from 33.50 + 0.10 to 52.90 + 0.70% while the amylopectin level was heated at 15 minutes (39.79 + 11.76%) and decreased to 39.20  +  11.44% after treatment with steam for 30 minutes.     Addition of water increased the starch resistant level from 8.75 + 1.06% to 15.40 +  1.51% while heating for15 minutes had the highest starch resistant of 16.65 + 0.04% compare to the longer steaming deration. This result concluded that the addition of water and the duration of steam greatly affects the content of starch, amylose, amylopectin and starch resistant     of   the wheat pollard. The best results of this study was the addition of 30% moisture content with a steam duration of 15 minutes which results in the highest starch resistant     of   16.65 +  0.04%.           Keywords:   wheat pollard; steam; moisture content; starch; amylose; starch resistant  },
   issn = {2407-5973},   pages = {221--225}  doi = {10.14710/reaktor.17.4.221-225},
    url = {https://ejournal.undip.ac.id/index.php/reaktor/article/view/16025}
}

Citation Format:

Abstract

The objective of the study was to determine the effects of water addition and steaming duration on starch composition of wheat pollard including starch, amylose, amylopectin and starch resistant. Water was added towheat pollard (0, 30 and 60%) and autoclaved at 121°C (15 and 30 min) afterward. The pollard then was oven-dry at 70°C. The study used a complete randomized design of 3x2 factorial with 3 replications. The addition of water and steaming duration showed a very significant (p<0.001) impact on the amylose and starch resistant parameters but not the starch and amylopectin. The addition of water increased the starch content from 38.71+0.10%. The starch content of a 15-min autoclave was higher (44.54+11.34%) than that of a 30-min (43.43+11.16%). The amylose levels decreased with addition of water and duration of autoclave. The amylose decrease from 5.23+0.10% to 4.03+0.32%. Addition of water increased the amylopectin level from 33.50+0.10 to 52.90+0.70% while the amylopectin level was heated at 15 minutes (39.79+11.76%) and decreased to 39.20 + 11.44% after treatment with steam for 30 minutes. Addition of water increased the starch resistant level from 8.75+1.06% to 15.40+ 1.51% while heating for15 minutes had the highest starch resistant of 16.65+0.04% compare to the longer steaming deration. This result concluded that the addition of water and the duration of steam greatly affects the content of starch, amylose, amylopectin and starch resistant of the wheat pollard. The best results of this study was the addition of 30% moisture content with a steam duration of 15 minutes which results in the highest starch resistant of 16.65+ 0.04%.

Keywords: wheat pollard; steam; moisture content; starch; amylose; starch resistant

Fulltext View|Download

Article Metrics:

Article Info

Section: Research Article

Language : EN

In Volume 17 No. 4 Desember 2017

Recent articles

Front Mattter Vol 17 No. 4 December 2017 A Study of Compost as an Adsorbent for Congo Red Dye Removal Process KINETIC STUDY OF OIL PALM EMPTY FRUIT BUNCH ENZYMATIC HYDROLYSIS Corrosion Characteristics of Carbon Steel upon Exposure to Biodiesel Synthesized from Used Frying Oil Back Matter Vol 17 No. 04 December 2017 More recent articles

Most cited articles

REAKSI KATALITIS ESTERIFIKASI ASAM OLEAT DAN METANOL MENJADI BIODIESEL DENGAN METODE DISTILASI REAKTIF Synthesis of Matrix Si-K-HAs Gel from Geothermal Sludge and Peat Peningkatan Produksi Gula Pereduksi dari Tandan Kosong Kelapa Sawit dengan Praperlakuan Asam Organik pada Reaktor Bertekanan EFFECT OF TEMPERATURE AND PARTICLE SIZE ON THE ALKALINE EXTRACTION OF PROTEIN FROM CHICKEN BONE WASTE PREPARASI KARBON TEREMBAN OKSIDA COBALT DARI LIMBAH KULIT MANGGIS SEBAGAI ADSORBEN PENJERAP ETILEN UNTUK PENGAWETAN BUAH More cited articles

Last update:

Quality improvement of fermented wheat pollard with addition of vitamin minerals seen from potential hydrogen content, total lactic acid bacteria and total yeast
Cahya Setya Utama, Bambang Sulistiyanto, Aghnia Balqis Anta Yolansa. IOP Conference Series: Earth and Environmental Science, 518 (1), 2020. doi: 10.1088/1755-1315/518/1/012017
Effect of the Autoclaving-Cooling Cycle on the Chemical, Morphological, Color, and Pasting Properties of Foxtail Millet Starch
Fitri Electrika Dewi Surawan, Eni Harmayani, Nurliyani, Djagal Wiseso Marseno. Preventive Nutrition and Food Science, 29 (3), 2024. doi: 10.3746/pnf.2024.29.3.365

Last update: 2025-01-31 17:42:15

No citation recorded.

In order for REAKTOR to publish and disseminate research articles, we need non-exclusive publishing rights (transferred from the author(s) to the publisher). This is determined by a publishing agreement between the Author(s) and REAKTOR. This agreement deals with transferring or licensing the publishing copyright to REAKTOR while Authors still retain significant rights to use and share their published articles. REAKTOR supports the need for authors to share, disseminate, and maximize the impact of their research and these rights in any databases.

As a journal author, you have the right to use your article for many purposes, including by your employing institute or company. These Author rights can be exercised without the need to obtain specific permission. Authors publishing in BCREC journals have wide rights to use their works for teaching and scholarly purposes without needing to seek permission, including, but not limited to:

use for classroom teaching by the Author or the Author's institution and presentation at a meeting or conference and distributing copies to attendees;
use for internal training by the author's company;
distribution to colleagues for their research use;
use in a subsequent compilation of the author's works;
inclusion in a thesis or dissertation;
reuse of portions or extracts from the article in other works (with full acknowledgment of the final article);
preparation of derivative works (other than commercial purposes) (with full acknowledgment of the final article);
voluntary posting on open websites operated by the author or the author’s institution for scholarly purposes,

(but it should follow the open access license of Creative Common CC-by-SA License).

Authors/Readers/Third Parties can copy and redistribute the material in any medium or format and remix, transform, and build upon the material for any purpose, even commercially. Still, they must give appropriate credit (the name of the creator and attribution parties (authors detail information), a copyright notice, an open access license notice, a disclaimer notice, and a link to the material), provide a link to the license, and indicate if changes were made (Publisher indicates the modification of the material (if any).

Authors/Readers/Third Parties can read, print and download, redistribute or republish the article (e.g., display in a repository), translate the article, download for text and data mining purposes, reuse portions or extracts from the article in other works, sell or re-use for commercial purposes, remix, transform, or build upon the material, they must distribute their contributions under the same license as the original Creative Commons Attribution-ShareAlike (CC BY-SA).