DOI: https://doi.org/10.14710/reaktor.83691

Impact Analysis of Jackfruit Seed Strach Coating on Acetylated Sorghum Starch Based-Biofoam Synthesis

*Yuli Darni orcid scopus  -  Department of Chemical Engineering, Universitas Lampung, Jl. Prof. Dr. Sumantri Brojonegoro No. 1 Bandar Lampung., Indonesia
Lia Lismeri scopus  -  Department of Chemical Engineering, Universitas Lampung, Jl. Prof. Dr. Sumantri Brojonegoro No. 1 Bandar Lampung., Indonesia
Sudibyo Sudibyo scopus  -  BRIN Science Area, Iskandar Zulkarnain Jl. Ir. Sutami KM. 15 (BPTM – BRIN Building) Tanjung Bintang, South Lampung, Lampung, Indonesia
Septia Maharani  -  Department of Chemical Engineering, Universitas Lampung, Jl. Prof. Dr. Sumantri Brojonegoro No. 1 Bandar Lampung., Indonesia
Aris Setiawan scopus  -  Department of Chemical Engineering, Universitas Lampung, Jl. Prof. Dr. Sumantri Brojonegoro No. 1 Bandar Lampung., Indonesia
Nindya Indah Kusumawardani  -  Department of Chemical Engineering, Universitas Lampung, Jl. Prof. Dr. Sumantri Brojonegoro No. 1 Bandar Lampung., Indonesia
Simparmin Br Ginting  -  Department of Chemical Engineering, Universitas Lampung, Jl. Prof. Dr. Sumantri Brojonegoro No. 1 Bandar Lampung., Indonesia
Published: .
Open Access Copyright (c) 2026 by Authors, Published by Dept. of Chemical Engineering Universitas Diponegoro
Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Citation Format:
Abstract

This study aimed to investigate the effect of jackfruit seed strach-based bioplastic coating on the characteristic of acetylated sorghum starch-based biofoam. The biofoam was produced using acetylated sorghum starch as the main material and jackfruit seed starch bioplastic as a coating, with coating starch masses of 5, .5, 10, and 12,5 grams, along with CMC and sorbitol as additives. The Fabrication process was carried out using the thermopressing method at 125°C for 15 minutes. Characterization included density testing, water absorption, compressive strength, biodegradability, functional group analysis using FTIR, and morphology observation using SEM. Based on the sample analysis result, the variation that meets the EPS Industry standard is achieved at 7.5 grams of coating srarch, with a density of 0.450 g/cm³, water absorption of 10.84%, compressive strength of .0748 MPa, and a biodegradability rate of 64.82% over 14 days.

 

Keywords: Biofoam, Acetylated Sorghum Starch, Jackfruit Seed Starch, Bioplastic, Coating. 
Fulltext Email colleagues

Article Metrics:

Article Info
Section: Research Article
Language : EN
Most cited articles
The Use of Natural Zeolite as A Catalyst for Esterification Reaction Between Glycerol and Oleic Acid Influence of Microwave Irradiation on Extraction of Chitosan from Shrimp Shell Waste The Design of ACE (Aluminum Corrosion and Electrolysis) Reactor and Its Performance to Produce Hydrogen from Beverage Cans THE OPTIMIZATION OF PRODUCTION ZEOLITE Y CATALYST FROM RHA BY RESPONSE SURFACE METHODOLOGY AKTIVITAS INULINASE OLEH Pichia manshurica DAN FUSAN F4 PADA FERMENTASI BATCH DENGAN UMBI DAHLIA (Dahlia sp) SEBAGAI SUBSTRAT More cited articles

Last update:

No citation recorded.

Last update: 2026-08-15 13:55:28

No citation recorded.