skip to main content

Optimization of Dredging Location Determination in Sutami Reservoir Using the Cut and Fill Method

*Tri Pambudi  -  Department of Civil Engineering, Universitas Diponegoro, Jl. Prof. Sudarto, SH, Tembalang, Semarang, Indonesia 50275|Universitas Diponegoro, Indonesia
Hari Nugroho  -  Department of Civil Engineering, Faculty of Engineering, Diponegoro Universitas , Tembalang, 50275, Semarang, Central Java, Indonesia, Indonesia
Suripin Suripin  -  Department of Civil Engineering, Faculty of Engineering, Diponegoro Universitas , Tembalang, 50275, Semarang, Central Java, Indonesia, Indonesia
Open Access Copyright (c) 2025 TEKNIK

How to cite (IEEE): T. Pambudi, H. Nugroho, and S. Suripin, "Optimization of Dredging Location Determination in Sutami Reservoir Using the Cut and Fill Method," TEKNIK, vol. 46, no. 2, pp. 134-143, Mar. 2025. https://doi.org/10.14710/teknik.v46i2.67919
Citation Format:
Abstract

The Sutami Dam is located on the Brantas River, precisely in Karangkates Village, Sumberpucung District, Malang Regency. The Sutami Dam has been in operation for fifty-one years. Based on observations in the field, the rate of sedimentation entering the Sutami Reservoir is quite high, resulting in shallowing in the reservoir storage area up to the intake gate, which can affect the performance and productive life of the reservoir. This research is conducted to evaluate the planning of mapping dredging locations, the potential sediment that can be dredged, and the increase in the volume capacity of the dredging equipment. This research uses data from bathymetry, which is then analyzed for sedimentation and scour values compared between 2019 and 2022. For soil parameter data, laboratory test results such as grain size analysis and hydrometer analysis are utilized. Data analysis using the cut-fill method in ArcMap 10.8.2 software. The results of this research show that in carrying out dredging activities in the reservoir area, it is necessary to divide the dredging location into two zones with two types of dredgers that have different specifications. To increase the dredging volume capacity in the Sutami Reservoir using the scenario of using two existing dredgers and the addition of two new dredgers, an increase in the dredging capacity in the Sutami Reservoir of 1,702,189.00 m³ per year was obtained.

Fulltext View|Download
Keywords: Dredging Optimization; Sedimentation Analysis; Cut and Fill Method; Reservoir Capacity Management; Bathymetric Survey

Article Metrics:

  1. Daftar Pustaka
  2. Andriawati, I. D., Rispiningtati, & Juwono, P. T. (2015). Efektifitas Kegiatan Pengerukan Sedimen Waduk Wonogiri Ditinjau Dari Nilai Ekonomi. Jurnal Teknik Pengairan, 6(1), 55–56. https://jurnalpengairan.ub.ac.id/index.php/jtp/article/view/227
  3. Chukwu Fidelis, N., & Badejo, O. T. (2015). Bathymetric Survey Investigation for Lagos Lagoon Seabed Topographical Changes. Journal of Geosciences and Geomatics, 3(2), 37–43. https://doi.org/10.12691/jgg-3-2-2
  4. Cunanda, Y., Asmaranto, R., & Wicaksono, P. H. (2021). Studi Evaluasi Pengerukan Sedimen Pada Central Sediment Sump di Lokasi Penambangan Emas PT. Bumi Suksesindo Kabupaten Banyuwangi. Jurnal Teknologi Dan Rekayasa Sumber Daya Air, 1(1), 1–16. https://doi.org/10.21776/ub.jtresda.2021.001.01.01
  5. Darama, Y., Selek, Z., Selek, B., Akgul, M. A., & Dagdeviren, M. (2019). Determination of sediment deposition of Hasanlar Dam using bathymetric and remote sensing studies. Natural Hazards, 97(1), 211–227. https://doi.org/10.1007/s11069-019-03635-y
  6. Kementerian Perhubungan. (2017). Pedoman Teknis Pengerukan Alur Pelayaran dan/atau Kolam Pelabuhan. Jakarta: Direktorat Kepelabuhan Direktur Jenderal Perhubungan Laut Kementerian Perhubungan
  7. Khakiki, N., Chrismianto, D., & Santosa, A. W. B. (2022). Studi Perancangan Kapal Penyedot Lumpur Sebagai Upaya Mengatasi Pendangkalan Sungai Barito di Kalimantan Selatan. Jurnal Teknik Perkapalan, 10(2), 29–36. https://ejournal3.undip.ac.id/index.php/naval/article/view/32160
  8. Mahendra, J. (2014). Cutter Suction Dredger Dan Jenis Material (Pada Pekerjaan Capital Dredging Pembangunan Pelabuhan Teluk Lamong). Jurnal Konstruksia, 6(1), 31–43
  9. Majid, A. D., & Kurniawati, H. A. (2018). Desain Amphibious Dredger Untuk Pengerukan Sungai Porong Sidoarjo di Daerah Buangan Lumpur Lapindo. Jurnal Teknik ITS, 7(2). https://doi.org/10.12962/j23373539.v7i2.32391
  10. Morris, G. L. (2020). Classification of Management Alternatives to Combat Reservoir Sedimentation. Encyclopedia of Earth Sciences Series, l, 1–24. https://doi.org/doi.org/10.3390/w12030861
  11. Morris, G. L., & Fan, J. (2010). Reserviour Sedimentation Handbook
  12. Ogunlela, A. O., Omole, O. B., & Olaniyi Yusuf, K. (2018). a Bathymetry-Based Reservoir Sedimentation Evaluation. Malaysian Journal of Civil Engineering, 30(3), 429–441. https://doi.org/10.11113/mjce.v30n3.518
  13. Perum Jasa Tirta I, 2022. (2022a). Kajian Dan Detail Engineering Design (DED) Konsep Pengerukan Buang Hilir Bendungan Sutami, Kabupaten Malang, Jawa Timur
  14. Perum Jasa Tirta I, 2022. (2022b). Kajian Kapasitas Tampungan Waduk Dalam Rangka Pengelolaan Sedimentasi Di Wilayah Sungai Brantas
  15. Prasetyo H, A., Agoes, S., & Musriyadi, T. B. (2014). Perancangan Sistem Permesinan Dan Sistem Penggerak Pada Auger Cutter Suction Dredger (ACSD) Sebagai Metode Pengerukan Di Waduk. Jurnal Teknik ITS, 3(1), G85–G88. https://doi.org/10.12962/j23373539.v3i1.5821
  16. Randle, Timothy J, Annandale, G., Morris, G., Hotchkiss, R., & Annandale, G. (2019). Reservoir Sediment Management: Building a Legacy of Sustainable Water Storage Reservoirs. National Reservoir Sedimentation and Sustainability Team White Paper
  17. Yohana, P. W., Trimulyono, A., & Yudo, H. (2022). Studi Perancangan dan Analisa Olah Gerak Kapal Trailing Suction Hopper Dredger untuk Reklamasi Teluk Jakarta. Jurnal Teknik Perkapalan, 10(1), 40–51. https://ejournal3.undip.ac.id/index.php/naval/article/view/30741

Last update:

No citation recorded.

Last update: 2025-04-26 17:05:21

No citation recorded.