DOI: https://doi.org/10.14710/ijred.8.2.161-168

A novel single input double output (SIDO) converter for torque ripple minimization in solar powered BLDC motor

Bapayya Naidu Kommula1, 2, 3, 4, 5 ,  Venkata Reddy Kota1, 2, 3, 4, 5

1Department of Electrical and Electronics Engineering,, India

2Jawaharlal Nehru Technological University Kakinada,, India

3Kakinada,, India

4 Andhra Pradesh,, India

5 India-533001., India

View all affiliations
Received: 11 Sep 2017; Revised: 17 Oct 2018; Accepted: 18 Nov 2018; Available online: 15 Jul 2019; Published: 13 Jun 2019.
Editor(s): H Hadiyanto

Citation Format:
Cover Image
Abstract

This paper proposes a new converter topology for torque ripple reduction in Brushless DC (BLDC) motor. Due to the torque ripple problem, the use of this motor is limited to few applications. In this paper, a Single Input Double Output (SIDO) converter is proposed to suppress the torque ripple in BLDC motor. The proposed SIDO converter provides two output voltages. One for supplying the motor throughout conduction time and second output voltage is given to the non-commutating phase of motor during commutation instants. This proposed SIDO converter is fed from Photo Voltaic (PV) system. This paper also presents a new Maximum Power Point Tracking (MPPT) based on trisection of Power-Voltage characteristics (TPVC) to attain the maximum power from the PV system. This scheme takes only 7 iterations to reach MPP. The intended configuration is developed and simulated in Matlab/Simulink environment. The results justify the superiority of proposed scheme that minimizes torque ripple in BLDC motor to only 6 to 12% from 50 to 80 % in conventional scheme and also extracts maximum power from PV system. ©2019. CBIORE-IJRED. All rights reserved

Fulltext View|Download
Keywords: BLDC motor, Torque Ripple, Single Input Double Output (SIDO) Converter, Maximum Power Point Tracking (MPPT)

Article Metrics:

Article Info
Section: Original Research Article
Language : EN
Recent articles
Monitoring the performances of a maximum power point tracking photovoltaic (MPPT PV) pumping system driven by a brushless direct current (BLDC) motor Comparative analysis between pyrolysis products of Spirulina platensis biomass and its residues Corrosion of the metal parts of diesel engines in biodiesel-based fuels More recent articles
Most cited articles
Design and Development of Prototype Cylindrical Parabolic Solar Collector for Water Heating Application Solmap: Project In India's Solar Resource Assessment Process Optimization for Ethyl Ester Production in Fixed Bed Reactor Using Calcium Oxide Impregnated Palm Shell Activated Carbon (CaO/PSAC) Experimental Study on the Production of Karanja Oil Methyl Ester and Its Effect on Diesel Engine Tax Incentive Policy for Geothermal Development: A Comparative Analysis in ASEAN More cited articles
  1. Bhukya, M.N., Kota V.R. (2017), A Novel PandOT-Neville’s Interpolation MPPT Scheme for Maximum PV System Energy Extraction. International Journal of Renewable Energy Development. doi: http://dx.doi.org/10.14710/ijred.0.X.%p
  2. Carlson, R., Lajoie-Mazenc, M. and Fagundes. J. C. D. S. (1992), Analysis of torque ripple due to phase commutation in brushless DC machines, IEEE Trans. Ind. Appl., 28(3), 632–638
  3. Chatterjee, A., Keyhani, A. and Kapoor, D. (2011), Identification of photovoltaic source models, IEEE Trans. Energy Convers., 26(3), 883-889
  4. Chowdhary S.R., Hiranmay S. (2010), Maximum power point tracking of partially shaded solar photovoltaic array. Solar energy mater. Sol. Cells, 94:1441-1447
  5. Elbaset, A.A., Ali, H. and Sattar, M. A.E. (2016), Implementation of a modified perturb and observe maximum power point tracking algorithm for photovoltaic system using an Embedded microcontroller, IET Renew. Power Gener., 10(4):551–560
  6. Gules, R., Santos, W.M.D., Reis, F.A.D., Romaneli, E.F.R and Badin, A.A. (2014), A modified SEPIC converter with high static gain for renewable applications, IEEE Trans. Power Electron., 29(11), 5860-5871
  7. Haines, G., Ertugrul, N. (2016), Wide speed range sensorless operation of brushless permanent magnet motor using flux linkage increment, IEEE Trans. Ind. Electron., 63(7), 4052-4060
  8. Huang, X., Andrew, G., Gerada, C., Fang, Y. and Lu, Q. (2012), Design of a five-phase brushless DC motor for a safety critical aerospace application, IEEE Trans. Ind. Electron., 59(9), 3532-3541
  9. Jiancheng, F., Xinxiu, Z. and Liu, G. (2013), Precise Accelerated Torque Control for Small Inductance Brushless DC Motor, IEEE Transactions On Power Electronics, 28(3): 1400-1412
  10. Kota V.R., Bhukya, M.N. (2017), A novel linear tangents based PandO scheme for MPPT of a PV system, Renewable and Sustainable Energy Reviews, 71, 257-267
  11. Kota, V.R., Bhukya, M.N. (2016), A simple and efficient MPPT scheme for PV module using 2-Dimensional look up table, 2016 IEEE Power and Energy Conference at Illinois (PECI), 1-7
  12. Kouro, S., Leon, J.I., Vinnikov, D., Franquelo, L.G. (2015), An overview of recent research and emerging PV converter technology, IEEE Trans. Ind. Electron. Mag., 9(1), 47-61
  13. Khan, J., Arsalan, M.H. (2016), Solar Power Technologies for sustainable electricity generation- A review, Renew. Sustain. Energy Rev, 55, 414-425
  14. Li, Z., Songfa, Z., Zhou, S. and Ahn J.W. (2014), Torque Ripple Minimization in Direct Torque Control of Brushless DC Motor, J Electr Eng Technol., 9, (5), 1569-1576
  15. Quan, L., Peter, W. (2008), A Review of the Single Phase Photovoltaic Module Integrated Converter Topologies with Three Different DC Link Configurations, IEEE Trans. Power Electron., 23(3), 1320-1333
  16. Sheng, T., Wang. X., Zhang, J. and Deng, Z. (2015), Torque-Ripple mitigation for brushless DC machine drive system using one-cycle average torque control," IEEE Trans. Ind. Electron., 62(4),2114-2122
  17. Pahalavani, M.R.A., Ayat, Y.S. and Vahedi, A. (2017), Minimisation of torque ripple in slotless axial flux BLDC motors in terms of design considerations, IET Ele. Power Appl., 11(6), 1124-1130
  18. Park, S.J, Park, H. W., Lee, M.H., Harashima, F. (2000), A new approach for minimum Torque Ripple Maximum efficiency control of BLDC motor, IEEE Trans. Ind. Electron., 47(1), 109-114
  19. Viswanathan, V., Jeevananthan, S. (2014), Approach for torque ripple reduction for brushless dc motor based on three-level neutral-point-clamped inverter with dc-dc converter, IET Power Electron., 8(1), 47-55
  20. Welchko B.A., de Rossiter Correa M. B., and Lipo, T. A. (2004), A three-level MOSFET inverter for low-power drives," IEEE Trans. Ind. Electron., 51(3), 669-674
  21. Xia, C.L. (2012), Permanent Magnet Brushless DC motor Drives and controls, Singpore: John Wiley andSons pvt. Ltd

Last update:

  1. Mitigating unbalance and improving voltage considering higher penetration ofEVsandDGusing hybrid optimization technique

    Ragavan Saravanan, Ganapathia Pillai Kannayeram, Rathinam Muniraj. International Transactions on Electrical Energy Systems, 31 (11), 2021. doi: 10.1002/2050-7038.13119

  2. A Novel Method of Electric Scooter Torque Estimation Using the Space Vector Modulation Control

    Chergui Hichem, Nasri Abdelfatah, Korhan Kayisli. International Journal of Renewable Energy Development, 10 (2), 2021. doi: 10.14710/ijred.2021.33403

  3. Improved Execution of the BLDC Motor using 3- Phase Conduction Mode for Electric Vehicle

    B Veera Narayana, CH Govinda, V Srinivasa Rao, Raju P S D Bhima, J Pavan, N Rajesh. 2021 5th International Conference on Computing Methodologies and Communication (ICCMC), 2021. doi: 10.1109/ICCMC51019.2021.9418284

  4. An integrated converter topology for torque ripple minimization in BLDC motor using an ITSA technique

    Bapayya Naidu Kommula, Venkata Reddy Kota. Journal of Ambient Intelligence and Humanized Computing, 13 (4), 2022. doi: 10.1007/s12652-021-02986-4

  5. Power Converters, Drives and Controls for Sustainable Operations

    R. Latha. 2023. doi: 10.1002/9781119792918.ch18

  6. Mitigating unbalance and improving voltage considering higher penetration of EVs and DG using hybrid optimization technique

    Ragavan Saravanan, Ganapathia Pillai Kannayeram, Rathinam Muniraj. International Transactions on Electrical Energy Systems, 31 (11), 2021. doi: 10.1002/2050-7038.13119

  7. Robust electric vehicle design using IANFIS controlling technology

    M. Murali, T. Appa Rao, P. Sharath Kumar, Ch. Rachappa, B. Omkar Lakshmi Jagan. Materials Today: Proceedings, 45 , 2021. doi: 10.1016/j.matpr.2020.07.629

  8. Implementation and comparative analysis of fuzzy logic controller to optimize output voltage of BLDC DC drive with conventional PI controller

    G. Rushith, T. Yuvaraj, A. S. Vickram. FIFTH INTERNATIONAL CONFERENCE ON APPLIED SCIENCES: ICAS2023, 3097 , 2024. doi: 10.1063/5.0197578

Last update: 2024-11-21 10:21:26

  1. A Novel Method of Electric Scooter Torque Estimation Using the Space Vector Modulation Control

    Chergui Hichem, Nasri Abdelfatah, Korhan Kayisli. International Journal of Renewable Energy Development, 10 (2), 2021. doi: 10.14710/ijred.2021.33403