1Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University, Jl. Prof. Soedarto, SH., Tembalang, Semarang 50271, Indonesia
2Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University, Jl. Prof. Soedarto, SH., Tembalang, Semarang, Indonesia
BibTex Citation Data :
@article{JKSA43652, author = {Muh Jufri and Retno Lusiana and Nor Basid Prasetya}, title = {Effects of Additional Polyvinyl Alcohol (PVA) on the Physiochemical Properties of Chitosan-Glutaraldehyde-Gelatine Bioplastic}, journal = {Jurnal Kimia Sains dan Aplikasi}, volume = {25}, number = {3}, year = {2022}, keywords = {PVA, bioplastic, physicochemical, biodegradable, antibacterial}, abstract = { This study investigated the effects of additional PVA on the physicochemical properties of the chitosan-glutaraldehyde/gelatin bioplastic composite. The best results of the bioplastic film were obtained at a concentration of 3% PVA, with a tensile strength value of 3.3 MPa, flexibility reached 54%, a thickness value of 0.24 mm, percentage of inhibition against E. coli and S. aureus was 21.8% and 8.8% respectively. The FTIR spectrum results showed no change in the wavenumber of the chitosan and gelatin chitosan spectrum with OH, CO, and NH functional groups. The spectrum indicates that only physical interactions occurred. The bioplastics are similar in thermal stability and have slight differences in bioplastic morphological contours. The average thickness of the bioplastics is between 0.20–0.26 mm. Based on the Japanese Industrial Standard (JIS), all bioplastics meet the standard thickness, which is < 0.25 mm, excluding chitosan, which has a thickness of 0.26 mm. The addition of PVA into the bioplastics structure increased the hydrophobicity, pH resistance, and flexibility of bioplastics. Meanwhile, additional PVA decreased biodegradability, only degraded by 60% at eight weeks. Based on these data, not all bioplastics can meet the degradation time criteria set by the international bioplastic standard ASTM D-6002, that bioplastics must be 100% degraded within eight weeks. Bioplastics made from chitosan and chitosan-gelatin have been degraded by 90% for 48 weeks. Based on the antibacterial properties, the inclusion of PVA into the bioplastic structure enhances the antibacterial properties. }, issn = {2597-9914}, pages = {130--136} doi = {10.14710/jksa.25.3.130-136}, url = {https://ejournal.undip.ac.id/index.php/ksa/article/view/43652} }
Refworks Citation Data :
This study investigated the effects of additional PVA on the physicochemical properties of the chitosan-glutaraldehyde/gelatin bioplastic composite. The best results of the bioplastic film were obtained at a concentration of 3% PVA, with a tensile strength value of 3.3 MPa, flexibility reached 54%, a thickness value of 0.24 mm, percentage of inhibition against E. coli and S. aureus was 21.8% and 8.8% respectively. The FTIR spectrum results showed no change in the wavenumber of the chitosan and gelatin chitosan spectrum with OH, CO, and NH functional groups. The spectrum indicates that only physical interactions occurred. The bioplastics are similar in thermal stability and have slight differences in bioplastic morphological contours. The average thickness of the bioplastics is between 0.20–0.26 mm. Based on the Japanese Industrial Standard (JIS), all bioplastics meet the standard thickness, which is < 0.25 mm, excluding chitosan, which has a thickness of 0.26 mm. The addition of PVA into the bioplastics structure increased the hydrophobicity, pH resistance, and flexibility of bioplastics. Meanwhile, additional PVA decreased biodegradability, only degraded by 60% at eight weeks. Based on these data, not all bioplastics can meet the degradation time criteria set by the international bioplastic standard ASTM D-6002, that bioplastics must be 100% degraded within eight weeks. Bioplastics made from chitosan and chitosan-gelatin have been degraded by 90% for 48 weeks. Based on the antibacterial properties, the inclusion of PVA into the bioplastic structure enhances the antibacterial properties.
Article Metrics:
Last update:
Last update: 2024-11-18 11:17:10
As an article writer, the author has the right to use their articles for various purposes, including use by institutions that employ authors or institutions that provide funding for research. Author rights are granted without special permission.
Author who publishes a paper at JKSA has the broad right to use their work for teaching and scientific purposes without the need to ask permission, including: used for (i) teaching in the author's class or institution, (ii) presentation at meetings or conferences and distributing copies to participants ; (iii) training conducted by the author or author's institution; (iv) distribution to colleagues for research use; (v) use in the compilation of subsequent authors' works; (vi) inclusion in a thesis or dissertation; (vi) reuse of part of the article in another work (with citation); (vii) preparation of derivative works (with citation); (viii) voluntary posting on open websites operated by authors or author institutions for scientific purposes (follow the CC BY-SA License).
Authors and readers can copy and redistribute material in any media or format, and mix, modify, and build material for any purpose but they must provide appropriate credit (provide article citation or content), providing links to the license, and indicate if there are changes.
The authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Kimia Sains dan Aplikasi (JKSA). Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations.
Reproduce any part of this journal, its storage in the database or its transmission by all forms or media is permitted does not need for written permission from JKSA. However, it should be cited as an honor in academic manners
JKSA and the Chemistry Department of Diponegoro University and the Editor make every effort to ensure that there are no data, opinions, or false or misleading statements published in JKSA. However, the content of the article is the sole and exclusive responsibility of each author.
The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form - Indonesian] [Copyright Transfer Form - English]. The copyright form should be signed originally and send to the Editor in the form of printed letters, scanned documents sent via email or fax.
Adi Darmawan, Ph.D (Editor in Chief)
Editor in chief of Jurnal Kimia Sains dan Aplikasi (JKSA)
Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University
Visitor: View My Stats
Jurnal Kimia Sains dan Aplikasi is indexed in:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.