1Department of Renewable Energy Bioprocess Engineering Technology, Politeknik ATI Padang, Padang, West Sumatra, Indonesia
2Department of Chemical Engineering Plant Materials, Politeknik ATI Padang, Padang, West Sumatra, Indonesia
BibTex Citation Data :
@article{JKSA67740, author = {Addin Akbar and Dedy Rahmad and Eko Supriadi and Dwi Putri}, title = {Synthesis of Calcium Glyceroxide Catalyst from Pensi Shells for CPO-Based Biodiesel Production}, journal = {Jurnal Kimia Sains dan Aplikasi}, volume = {28}, number = {1}, year = {2025}, keywords = {Catalyst; CaO; Calcium Glyceroxide; Biodiesel}, abstract = { The synthesis of a calcium glyceroxide catalyst derived from pensi shells for biodiesel production using crude palm oil (CPO) has been successfully conducted. The catalyst was prepared via the wet impregnation method by reacting CaO with glycerol in methanol as a solvent for 5 hours at 65°C, with catalyst-to-glycerol ratios of 1:1, 1:1.5, and 1:2. The glycerol used was obtained from crude glycerol, a by-product of biodiesel transesterification. CaO was derived from the calcination of pensi shells at 1000°C. The synthesized catalyst was tested for activity in biodiesel production from CPO. The test parameters included catalyst concentrations of 1.5%, 2%, and 2.5%, reaction times of 2 hours and 4 hours, and oil-to-methanol molar ratios of 1:5. The biodiesel yield for a 2-hour reaction time at catalyst concentrations of 1.5%, 2%, and 2.5% was 56.32%, 54.80%, and 50.19%, respectively. For a 4-hour reaction time at the same concentrations, the biodiesel yields were 40.28%, 60.73%, and 65.98%, respectively. Catalyst characterization was performed using XRD, XRF, SEM, and FTIR to support the activity test data. SEM analysis visually confirmed the bonding between CaO and glycerol. XRD results revealed the highest peaks at 2θ angles of 37.621° for CaO and 34.101° for Ca(OH) 2 , indicating a bond formation between CaO and glycerol. XRF analysis determined a CaO concentration of 96.21%. FTIR analysis identified the presence of glycerol through dominant -OH and C-O groups. The quality of the resulting biodiesel was tested against SNI (Indonesian National Standard) parameters. The analysis showed the highest methyl ester content (95.6%) at a reaction time of 4 hours. The highest oxidation stability (10.77 hours) was observed at a reaction time of 2 hours. Additional results included an acid number of 0.1%, total glycerol content of 0.279%-b, free glycerol content of 0.018%-b, and viscosity at 40°C of 3.559 mm 2 /s. The quality test results demonstrated that several parameters met SNI biodiesel standards. }, issn = {2597-9914}, pages = {1--7} doi = {10.14710/jksa.28.1.1-7}, url = {https://ejournal.undip.ac.id/index.php/ksa/article/view/67740} }
Refworks Citation Data :
The synthesis of a calcium glyceroxide catalyst derived from pensi shells for biodiesel production using crude palm oil (CPO) has been successfully conducted. The catalyst was prepared via the wet impregnation method by reacting CaO with glycerol in methanol as a solvent for 5 hours at 65°C, with catalyst-to-glycerol ratios of 1:1, 1:1.5, and 1:2. The glycerol used was obtained from crude glycerol, a by-product of biodiesel transesterification. CaO was derived from the calcination of pensi shells at 1000°C. The synthesized catalyst was tested for activity in biodiesel production from CPO. The test parameters included catalyst concentrations of 1.5%, 2%, and 2.5%, reaction times of 2 hours and 4 hours, and oil-to-methanol molar ratios of 1:5. The biodiesel yield for a 2-hour reaction time at catalyst concentrations of 1.5%, 2%, and 2.5% was 56.32%, 54.80%, and 50.19%, respectively. For a 4-hour reaction time at the same concentrations, the biodiesel yields were 40.28%, 60.73%, and 65.98%, respectively. Catalyst characterization was performed using XRD, XRF, SEM, and FTIR to support the activity test data. SEM analysis visually confirmed the bonding between CaO and glycerol. XRD results revealed the highest peaks at 2θ angles of 37.621° for CaO and 34.101° for Ca(OH)2, indicating a bond formation between CaO and glycerol. XRF analysis determined a CaO concentration of 96.21%. FTIR analysis identified the presence of glycerol through dominant -OH and C-O groups. The quality of the resulting biodiesel was tested against SNI (Indonesian National Standard) parameters. The analysis showed the highest methyl ester content (95.6%) at a reaction time of 4 hours. The highest oxidation stability (10.77 hours) was observed at a reaction time of 2 hours. Additional results included an acid number of 0.1%, total glycerol content of 0.279%-b, free glycerol content of 0.018%-b, and viscosity at 40°C of 3.559 mm2/s. The quality test results demonstrated that several parameters met SNI biodiesel standards.
Article Metrics:
Last update:
Last update: 2026-09-01 16:19:34
As an article writer, the author has the right to use their article for various purposes, including use by institutions that employ the author or institutions that provide funding for the research. These author rights are granted without special permission.
Authors who publish a paper in JKSA have broad rights to use their work for teaching and scientific purposes without the need to request permission, including: (i) teaching in the author's class or institution; (ii) presenting the work at meetings or conferences and distributing copies to participants; (iii) using the work in training conducted by the author or the author's institution; (iv) distributing copies to colleagues for research purposes; (v) using the work in the compilation of subsequent works by the author; (vi) including the work in a thesis or dissertation; (vii) reusing part of the article in another work, with appropriate citation; (viii) preparing derivative works, with appropriate citation; and (ix) voluntarily posting the work on open websites operated by the author or the author's institution for scientific purposes, in accordance with the CC BY-SA License.
Authors and readers may copy and redistribute the material in any medium or format, and may remix, transform, and build upon the material for any purpose, provided that they give appropriate credit by citing the article or its content, provide a link to the license, and indicate if changes were made.
The authors submitting a manuscript do so on the understanding that, if accepted for publication, the copyright of the article shall be assigned to Jurnal Kimia Sains dan Aplikasi (JKSA). Copyright encompasses the rights to reproduce and distribute the article in all forms and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Reproducing any part of this journal, storing it in a database, or transmitting it in any form or medium is permitted without written permission from JKSA. However, the original source must be properly cited in accordance with academic conventions.
JKSA, the Chemistry Department of Diponegoro University, and the Editor make every effort to ensure that no inaccurate, false, or misleading data, opinions, or statements are published in JKSA. However, the content of each article is the sole and exclusive responsibility of its authors.
The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form - Indonesian] [Copyright Transfer Form - English]. The copyright form should bear the authors' original signatures and be sent to the Editor as a printed document, a scanned document sent via email, or by fax.
Prof. Adi Darmawan, Ph.D (Editor in Chief)
Editor in chief of Jurnal Kimia Sains dan Aplikasi (JKSA)
Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University
Visitor: View My Stats
Jurnal Kimia Sains dan Aplikasi is indexed in:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.