Vol. 43, No. 2 (2022): August 2022

General information

Published:	04-07-2022
Total Articles: (including Editorial)	13
Total Authors:	48
Total Countries:	2

Total affiliation countries (2)

	Indonesia	(47)
	Uzbekistan	(1)

Total authors' affiliations (13)

	Diponegoro University
	Universitas Diponegoro
	Universitas Andalas
	UNS
	Universitas Sebelas Maret
	60236".
	Program Studi Teknik Mesin Universitas Kristen Petra
	50275
	Uzbekistan 100095
	Semarang-Indonesia
	Indonesia 50275
	Department of Chemical Engineering
	Faculty of Engineering

Issues list

Vol 45, No 2 (2024): August 2024 Vol. 45, No. 1 (2024): May 2024 Vol. 44, No. 2 (2023): August 2023 Vol. 44, No. 3 (2023): December 2023 Vol. 44, No. 1 (2023): May 2023 Vol. 43, No. 3 (2022): December 2022 Vol. 43, No. 2 (2022): August 2022 Vol. 43, No. 1 (2022): Mei 2022 Vol 42, No. 3 (2021): December 2021 Complete issues

Vol. 43, No. 2 (2022): August 2022

TEKNIK Vol. 43 No. 2 2022 is available online since August 2022

Table of Contents

Artikel

	Indikator Penentu Kepuasan Dalam Penilaian Kota Layak Huni Menggunakan Metode Important Performance Analysis Edi Purwanto, Very Darmawan \| Language: ID \| DOI: 10.14710/teknik.v43i2.38536 Received: 23 May 2021; Revised: 8 Apr 2022; Accepted: 11 Apr 2022; Published: 13 Jul 2022.	PDF 112-123
	Studi Eksperimental Jumlah Segmen terhadap Kekuatan dan Kekakuan Pelat Lantai Beton Segmental Yulita Arni Priastiwi, Ilham Nurhuda, Edo Antonio \| Language: ID \| DOI: 10.14710/teknik.v43i2.45292 Received: 18 Mar 2022; Revised: 3 Jul 2022; Accepted: 4 Jul 2022; Published: 4 Jul 2022.	PDF 124-130
	Analisis Eksergi Pada Pembangkit Listrik yang Memanfaatkan Panas Buangan Di PT Semen Padang Nadry Heroza, Adjar Pratoto \| Language: ID \| DOI: 10.14710/teknik.v43i2.37333 Received: 18 Mar 2021; Revised: 1 May 2022; Accepted: 2 Jun 2022; Published: 13 Jul 2022.	PDF 131-139
	Analisis Perubahan Jumlah Slot pada Permanent Magnet Synchronous Generator (PMSG) untuk Mencapai Nilai Optimal Back EMF dan KE Berbasis Finite Element Method (FEM) Slash Arthur Edi Sumawang, Subuh Pramono \| Language: ID \| DOI: 10.14710/teknik.v43i2.44519 Received: 31 Jan 2022; Revised: 18 Jul 2022; Accepted: 20 Jul 2022; Published: 28 Jul 2022.	PDF 140-146
	Optimasi Multirespon pada Proses 3D Printing Material ABS dengan Metode Taguchi-PCR Topsis Yopi Yusuf Tanoto, Vincensius Filbert, Ronaldo Febrian, Nicholas Adriel \| Language: ID \| DOI: 10.14710/teknik.v43i2.43301 Received: 13 Dec 2021; Revised: 19 Jul 2022; Accepted: 20 Jul 2022; Published: 28 Jul 2022.	PDF 147-157
	Mobile Robotic-Arm Development for A Small-Scale Inter-Room Logistic Delivery using 2D LIDAR-guided Navigation Mobile Robotic-Arm Development for a Small-Scale Inter-Room Logistic Delivery using 2D LIDAR-guided Navigation Hadha Afrisal, Ghanis Kauchya Nugraha, Aan Aria Nanda, Ahmad Didik Setiyadi, Olimjon Toirov, Rifky Ismail, Wahyul Amien Syafei, Munawar Agus Riyadi, Iwan Setiawan \| Language: EN \| DOI: 10.14710/teknik.v43i2.45642 Received: 7 Apr 2022; Revised: 27 Aug 2022; Accepted: 28 Aug 2022; Published: 31 Aug 2022.	PDF 158-167
	Investigasi Pengaruh Keterlambatan Pembayaran Proyek Konstruksi dari Owner kepada Kontraktor Jati Utomo Dwi Hatmoko, Arif Hidayat, Moammar Zachari, Satria Sentik Herman Merukh \| Language: ID \| DOI: 10.14710/teknik.v43i2.45876 Received: 19 Apr 2022; Revised: 30 Aug 2022; Accepted: 31 Aug 2022; Published: 29 Aug 2022.	PDF 168-177
	Analisis Perubahan Konsentrasi Total Suspended Solid secara Multitemporal Menggunakan Citra Sentinel 2A (Studi Kasus: Danau Rawa Pening, Jawa Tengah) ANALISIS PERUBAHAN KONSENTRASI TOTAL SUSPENDED SOLID SECARA MULTITEMPORAL MENGGUNAKAN CITRA SENTINEL 2A (STUDI KASUS: DANAU RAWA PENING, JAWA TENGAH) Bandi Sasmito, Nurhadi Bashit, Erliza Rachmadiana \| Language: ID \| DOI: 10.14710/teknik.v43i2.46469 Received: 30 May 2022; Revised: 23 Aug 2022; Accepted: 23 Aug 2022; Available online: 25 Aug 2022; Published: 30 Aug 2022.	PDF 178-189
	Human Action Recognition (HAR) Classification Using MediaPipe and Long Short-Term Memory (LSTM) Ichsan Arsyi Putra, Oky Dwi Nurhayati, Dania Eridani \| Language: EN \| DOI: 10.14710/teknik.v43i2.46439 Received: 29 May 2022; Revised: 20 Jul 2022; Accepted: 26 Aug 2022; Published: 28 Aug 2022.	PDF 190-201
	Analisa Pengaruh Metode Hot Dip Galvanizing Dengan Variasi Temperatur dan Waktu Pencelupan Terhadap Laju Korosi Pipa Air Laut Kapal Material Baja AISI 1020 Ari Wibawa Budi Santosa, Reimigius Baskatara Bungkang, Ocid Mursid \| Language: ID \| DOI: 10.14710/teknik.v43i2.45612 Received: 6 Apr 2022; Revised: 30 Aug 2022; Accepted: 30 Aug 2022; Published: 30 Aug 2022.	PDF 202-210
	Non-Microplastic Microbeads From Sago Liquid Waste With The Addition Of Chitosan as Antibacterial Function: A Review Silviana Silviana, Fakhri Santo Khoirudin, Ferris Andhika Pratama, Rizky Putri Adelina Harahap, Alfi Hasanah, Queen Ruhmaningrum, Lailatul Khoiriyah, Saskia Vianova, Michelle Nabillarisa Qori Santoso, Yoga Anugra Guslamari, Cantika Aulia Salsabila \| Language: EN \| DOI: 10.14710/teknik.v43i2.40855 Received: 23 Aug 2021; Revised: 1 Aug 2022; Accepted: 2 Aug 2022; Published: 30 Aug 2022.	PDF 211-221

Editorial Information

	Front Matter Editor in Chief TEKNIK \| Language: ID Received: 30 Aug 2022; Revised: 30 Aug 2022; Accepted: 30 Aug 2022; Published: 30 Aug 2022.	PDF i-v
	Back Matter Editor in Chief TEKNIK \| Language: ID Received: 30 Aug 2022; Revised: 30 Aug 2022; Accepted: 30 Aug 2022; Published: 30 Aug 2022.	PDF App. 1-5

TEKNIK (p-ISSN: 0852-1697; e-ISSN: 2460-9919), is a scientific journal published by Fakultas Teknik, Universitas Diponegoro, Jln. Prof. Soedarto, SH, UNDIP Tembalang Campus, Semarang, Central Java, ZIP: 50275; Telp. (024)7460056, Fax: (024)7460055, E-mail: jteknik@live.undip.ac.id

Creative Commons License

Journal Teknik can be accessed online by http://ejournal.undip.ac.id/index.php/teknik is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Undip Electronic Journal System (UEJS) - Copyright ©2024 Universitas Diponegoro. Powered by Public Knowledge Project OJS and Mason Publishing OJS theme.