DOI: https://doi.org/10.14710/ijred.2020.29898

An Analysis of the Stacking Potential and Efficiency of Plant-Microbial Fuel Cells Growing Green Beans (Vigna ungiculata ssp. sesquipedalis)

1School of Chemical, Biological, and Materials Engineering and Sciences, Mapua University, Manila, Philippines

2Center for Renewable Bioenergy Research, Mapua University, Manila, Philippines

Received: 4 May 2020; Revised: 4 Jul 2020; Accepted: 19 Jul 2020; Available online: 3 Aug 2020; Published: 15 Oct 2020.
Editor(s): Marcelinus Christwardana, H. Hadiyanto
Open Access Copyright (c) 2020 The Authors. Published by Centre of Biomass and Renewable Energy (CBIORE)
Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Citation Format:
Abstract
Plant-Microbial Fuel Cell (PMFC) technology is a promising bioelectrochemical system that can exploit natural plant rhizodeposition to generate electricity. PMFCs can be used to simultaneously generate electricity while growing edible plants, as illustrated in this study. However, the common problem encountered for soil PMFCs is the low power output. To solve this problem, the stacking behavior of PMFCs was examined to maximize the power output of several cells. A grid of 9 PMFCs (3x3) was constructed with stainless steel and carbon fiber electrodes growing green beans (V. ungiculata spp. sesquipedalis) for stacking purposes. Stacking results have shown that too many cells connected in series will result in voltage losses, while stacking in parallel conserves voltage between cells. Stacking a maximum of 3 cells in series is acceptable based on the results, since cumulative stacking revealed that voltage reversals can reduce the overall potential of the stack if there are too many connected cells. Stack combinations were also tested, resulting in an enhanced performance upon combining series and parallel connections allowing power to be amplified and power density to be conserved. The combination of three sets of three cells in series stacked in parallel (3S-P) generated the highest power and power density (160.86 μW/m2) amongst all combinations, showing that power amplification without losses to power density are possible in PMFC stacking. Overall, proper stacking combinations have been shown to greatly affect the performance of PMFCs. It is hoped that the results of this study will contribute to the efforts of applying PMFC technology on a larger scale.
Fulltext View|Download
Keywords: stacking efficiency; renewable energy; bioelectrochemical systems; plant-microbial fuel cells; solar bioenergy

Article Metrics:

Article Info
Section: Special Issue on Microbial - Enzymatic Fuel Cells
Language : EN
Recent articles
Comparative Study of the Thermal Performance of Two Thermosiphon Solar Water Heaters System Techno-Economic Analysis for Bioethanol Plant with Multi Lignocellulosic Feedstocks Physicochemical Characterization of Native and Steam Explosion Pretreated Wild Sugarcane (Saccharum spontaneum) Melting Behavior of Phase Change Material in a Solar Vertical Thermal Energy Storage with Variable Length Fins added on the Heat Transfer Tube Surfaces An Analysis of the Stacking Potential and Efficiency of Plant-Microbial Fuel Cells Growing Green Beans (Vigna ungiculata ssp. sesquipedalis) Performance and Techno-Economic Analysis of Scaling-up A Single-Chamber Yeast Microbial Fuel Cell as Dissolved Oxygen Biosensor More recent articles
  1. Aulakh, M., Wassmann, R., Bueno, C., Kreuzwieser, J., & Rennenberg, H. (2001). Characterization of root exudates at different growth stages of ten rice (Oryza sativa L.) cultivars. Plant Biology, 3, 139–148. https://doi.org/10.1055/s-2001-12905
  2. Bacilio-Jiménez, M., Aguilar-Flores, S., Ventura-Zapata, E., Pérez-Campos, E., Bouquelet, S., & Zenteno, E. (2003). Chemical characterization of root exudates from rice (Oryza sativa) and their effects on the chemotactic response of endophytic bacteria. Plant and Soil, 249(2), 271–277. https://doi.org/10.1023/A:1022888900465
  3. Bais, H. P., Weir, T. L., Perry, L. G., Gilroy, S., & Vivanco, J. M. (2006). the Role of Root Exudates in Rhizosphere Interactions With Plants and Other Organisms. Annual Review of Plant Biology, 57(1), 233–266. https://doi.org/10.1146/annurev.arplant.57.032905.105159
  4. Bajracharya, S., Sharma, M., Mohanakrishna, G., Dominguez, X., Strik, D. P. B. T. B., & Sarma, P. M. (2016). An overview on emerging bioelectrochemical systems (BESs): Technology for sustainable electricity , waste remediation , resource recovery , chemical production and beyond. Renewable Energy. https://doi.org/10.1016/j.renene.2016.03.002
  5. De La Rosa, E. O., Castillo, J. V., Campos, M. C., Pool, G. R. B., Nuñez, G. B., Atoche, A. C., & Aguilar, J. O. (2019). Plant microbial fuel cells-based energy harvester system for self-powered IoT applications. Sensors (Switzerland), 19(6), 1–16. https://doi.org/10.3390/s19061378
  6. Eskew, D. L., Welch, R. M., & Cary, E. E. (1983). Nickel: An essential micronutrient for legumes and possibly all higher plants. Science, 222(4624), 621–623. https://doi.org/10.1126/science.222.4624.621
  7. Estrada-Arriaga, E. B., Guillen-Alonso, Y., Morales-Morales, C., García-Sánchez, L., Bahena-Bahena, E. O., Guadarrama-Pérez, O., & Loyola-Morales, F. (2017). Performance of air-cathode stacked microbial fuel cells systems for wastewater treatment and electricity production. Water Science and Technology, 76(3), 683–693. https://doi.org/10.2166/wst.2017.253
  8. Greenman, J., & Ieropoulos, I. A. (2017). Allometric scaling of microbial fuel cells and stacks: The lifeform case for scale-up. Journal of Power Sources, 356, 365–370. https://doi.org/10.1016/j.jpowsour.2017.04.033
  9. Gurung, A., & Oh, S. E. (2012). The improvement of power output from stacked microbial fuel cells (MFCs). Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 34(17), 1569–1576. https://doi.org/10.1080/15567036.2012.660561
  10. Holland, B. L., Monk, N. A. M., Clayton, R. H., & Osborne, C. P. (2019). A theoretical analysis of how plant growth is limited by carbon allocation strategies and respiration. In Silico Plants, 1(1), 1–18. https://doi.org/10.1093/insilicoplants/diz004
  11. Hou, J., Liu, Z., & Li, Y. (2015). Polyaniline Modified Stainless Steel Fiber Felt for High-Performance Microbial Fuel Cell Anodes. Journal of Clean Energy Technologies, 3(3), 165–169. https://doi.org/10.7763/jocet.2015.v3.189
  12. Ieropoulos, I. A., Greenman, J., & Melhuish, C. (2013). Miniature microbial fuel cells and stacks for urine utilisation. International Journal of Hydrogen Energy, 38(1), 492–496. https://doi.org/10.1016/j.ijhydene.2012.09.062
  13. Ishii, S., Ishii, S., Suzuki, S., Wu, A., Wu, A., Bretschger, O., … Yamanaka, Y. (2017). Population dynamics of electrogenic microbial communities in microbial fuel cells started with three different inoculum sources. Bioelectrochemistry, 117, 74–82. https://doi.org/10.1016/j.bioelechem.2017.06.003
  14. Khudzari, J. M., Gariepy, Y., Kurian, J., Tartakovsky, B., & Raghavan, G. S. V. (2018). Effects of biochar anodes in rice plant microbial fuel cells on the production of bioelectricity, biomass, and methane. Biochemical Engineering Journal. https://doi.org/10.1016/j.bej.2018.10.012
  15. Kimbrough, D. E., Cohen, Y., Winer, A. M., Creelman, L., & Mabuni, C. (1999). A critical assessment of chromium in the environment. Critical Reviews in Environmental Science and Technology, 29(1), 1–46. https://doi.org/10.1080/10643389991259164
  16. Kläring, H. P., Hauschild, I., & Heißner, A. (2014). Fruit removal increases root-zone respiration in cucumber. Annals of Botany, 114(8), 1735–1745. https://doi.org/10.1093/aob/mcu192
  17. Linares, R. V., Domínguez-Maldonado, J., Rodríguez-Leal, E., Patrón, G., Castillo-Hernández, A., Miranda, A., … Alzate-Gaviria, L. (2019). Scale up of microbial fuel cell stack system for residential wastewater treatment in continuous mode operation. Water, 11(2), 1–16. https://doi.org/10.3390/w11020217
  18. Liu, H., Zhang, B., Liu, Y., Wang, Z., & Hao, L. (2015). Continuous bioelectricity generation with simultaneous sulfide and organics removals in an anaerobic baffled stacking microbial fuel cell. International Journal of Hydrogen Energy, 40(25), 8128–8136. https://doi.org/10.1016/j.ijhydene.2015.04.103
  19. Logan, B. E., Hamelers, B., Rozendal, R., Schröder, U., Keller, J., Freguia, S., … Rabaey, K. (2006). Microbial fuel cells: Methodology and technology. Environmental Science and Technology. https://doi.org/10.1021/es0605016
  20. Nikhil, G. N., Krishna Chaitanya, D. N. S., Srikanth, S., Swamy, Y. V., & Venkata Mohan, S. (2018). Applied resistance for power generation and energy distribution in microbial fuel cells with rationale for maximum power point. Chemical Engineering Journal, 335(May 2017), 267–274. https://doi.org/10.1016/j.cej.2017.10.139
  21. Nitisoravut, R., & Regmi, R. (2017). Plant microbial fuel cells: A promising biosystems engineering. Renewable and Sustainable Energy Reviews, 76(March), 81–89. https://doi.org/10.1016/j.rser.2017.03.064
  22. Nye, P. H. (1979). Diffusion of ions and uncharged solutes in soild and soil clays. Advances in Agronomy, 31
  23. Oh, S. E., & Logan, B. E. (2007). Voltage reversal during microbial fuel cell stack operation. Journal of Power Sources, 167(1), 11–17. https://doi.org/10.1016/j.jpowsour.2007.02.016
  24. Pamintuan, K.R.S., Clomera, J. A. A., Garcia, K. V., Ravara, G. R., & Salamat, E. J. G. (2018). Stacking of aquatic plant-microbial fuel cells growing water spinach (Ipomoea aquatica) and water lettuce (Pistia stratiotes). In IOP Conference Series: Earth and Environmental Science (Vol. 191). https://doi.org/10.1088/1755-1315/191/1/012054
  25. Pamintuan, Kristopher Ray S., Bagumba, I. H. P., & Domingo, Z. D. G. (2020). Compartmentalization studies of a deep-design batch Microbial Fuel Cell assembly. Journal of Physics: Conference Series, 1457(1). https://doi.org/10.1088/1742-6596/1457/1/012010
  26. Pamintuan, Kristopher Ray S., & Sanchez, K. M. (2019). Power generation in a plant-microbial fuel cell assembly with graphite and stainless steel electrodes growing Vigna Radiata. In IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899X/703/1/012037
  27. Pequerul, A., Perez, C., Madero, P., Val, J., & Monge, E. (1993). Optimization of Plant Nutrition. Optimization of Plant Nutrition, (December 2015). https://doi.org/10.1007/978-94-017-2496-8
  28. Reyes, C., Lat, D., & Pamintuan, K. R. S. (2018). Compartmentalization, polarization, and multiple electrode optimization in PMFCs with Cynodon dactylon
  29. Sarojam, P. (2010). Analysis of Wastewater for Metals using ICP-OES. Perkin Elmer Instruments
  30. Ueoka, N., Sese, N., Sue, M., Kouzuma, A., & Watanabe, K. (2016). Sizes of Anode and Cathode Affect Electricity Generation in Rice Paddy-Field Microbial Fuel Cells. Journal of Sustainable Bioenergy Systems, 06(01), 10–15. https://doi.org/10.4236/jsbs.2016.61002
  31. Vaidyanathan, L. V., Drew, M. C., & Nye, P. H. (1968). The measurement and mechanism of ion diffusion in soils, 19(1)
  32. Wetser, K., Dieleman, K., Buisman, C., & Strik, D. (2017). Electricity from wetlands: Tubular plant microbial fuels with silicone gas-diffusion biocathodes. Applied Energy, 185, 642–649. https://doi.org/10.1016/j.apenergy.2016.10.122
  33. Yazdi, H., Alzate-Gaviria, L., & Ren, Z. J. (2015). Pluggable microbial fuel cell stacks for septic wastewater treatment and electricity production. Bioresource Technology, 180, 258–263. https://doi.org/10.1016/j.biortech.2014.12.100
  34. Zhang, J., Li, J., Ye, D., Zhu, X., Liao, Q., & Zhang, B. (2014). Tubular bamboo charcoal for anode in microbial fuel cells. Journal of Power Sources, 272, 277–282
  35. Zhou, Y., Tang, L., Liu, Z., Hou, J., Chen, W., Li, Y., & Sang, L. (2017). A novel anode fabricated by three-dimensional printing for use in urine-powered microbial fuel cell. Biochemical Engineering Journal, 124, 36–43. https://doi.org/10.1016/j.bej.2017.04.012

Last update:

No citation recorded.

Last update:

No citation recorded.