1Department of Agro Chemical Engineering, Politeknik ATI Padang, Padang 25171, West Sumatera, Indonesia
2Department of Chemical Engineering, Faculty of Engineering, Diponegoro University, Semarang 50275, Central Java, Indonesia
BibTex Citation Data :
@article{JKSA60997, author = {Agung Yahya and Enny Nurmalasari and Apsari Aini and Hana Ulya}, title = {Performance Evaluation of Bentonite/Nano-SiO2 Composite as Bleaching Earth in Crude Palm Oil Processing}, journal = {Jurnal Kimia Sains dan Aplikasi}, volume = {27}, number = {4}, year = {2024}, keywords = {Bleaching earth; Crude Palm Oil; nano-SiO2; β-carotene; adsorption}, abstract = { In crude palm oil (CPO) processing industries, bleaching is important to remove unwanted impurities. Most industries use various bleaching earth with 0.8-2% w/v concentration during the bleaching process. As bleaching earth is single-used for the bleaching process, materials with higher adsorption ability are preferable to reduce the use of bleaching earth. This study aimed to evaluate the performance of bentonite/nano SiO 2 composite (BE-SiO 2 ) as bleaching earth in the bleaching process of CPO. The prepared BE-SiO 2 was used in the bleaching process with various BE-SiO 2 concentrations (0.1-1.3% w/v), process duration (0-2.5 hours), and process temperature (70-150°C). From the results, the rise in BE-SiO 2 concentration during the CPO bleaching process initially led to a decrease in the β-carotene concentration, acid content, free fatty acids (FFA), and DOBI number up to 1% w/v of BE-SiO 2 . Subsequently, these parameters exhibited an increase with the addition of BE-SiO 2 . The bleaching process effectively reduced the β-carotene concentration, acid content, FFA, and DOBI number within the first 1.5 hours of operation. While a higher amount of β-carotene was adsorbed during the adsorption process at higher temperatures, the bleached palm oil (BPO) quality was compromised due to the heat. The results showed that the most effective condition of the bleaching process was performed with 1% w/v BE-SiO 2 concentration for 1.5 hours at 90°C. From those conditions, the BPO had a β-carotene concentration of 312.311 ppm, water content of 0.112%, acid number of 0.0076, FFA of 4.864%, DOBI number of 1.311, and red/yellow of 1.5/15. }, issn = {2597-9914}, pages = {167--173} doi = {10.14710/jksa.27.4.167-173}, url = {https://ejournal.undip.ac.id/index.php/ksa/article/view/60997} }
Refworks Citation Data :
In crude palm oil (CPO) processing industries, bleaching is important to remove unwanted impurities. Most industries use various bleaching earth with 0.8-2% w/v concentration during the bleaching process. As bleaching earth is single-used for the bleaching process, materials with higher adsorption ability are preferable to reduce the use of bleaching earth. This study aimed to evaluate the performance of bentonite/nano SiO2 composite (BE-SiO2) as bleaching earth in the bleaching process of CPO. The prepared BE-SiO2 was used in the bleaching process with various BE-SiO2 concentrations (0.1-1.3% w/v), process duration (0-2.5 hours), and process temperature (70-150°C). From the results, the rise in BE-SiO2 concentration during the CPO bleaching process initially led to a decrease in the β-carotene concentration, acid content, free fatty acids (FFA), and DOBI number up to 1% w/v of BE-SiO2. Subsequently, these parameters exhibited an increase with the addition of BE-SiO2. The bleaching process effectively reduced the β-carotene concentration, acid content, FFA, and DOBI number within the first 1.5 hours of operation. While a higher amount of β-carotene was adsorbed during the adsorption process at higher temperatures, the bleached palm oil (BPO) quality was compromised due to the heat. The results showed that the most effective condition of the bleaching process was performed with 1% w/v BE-SiO2 concentration for 1.5 hours at 90°C. From those conditions, the BPO had a β-carotene concentration of 312.311 ppm, water content of 0.112%, acid number of 0.0076, FFA of 4.864%, DOBI number of 1.311, and red/yellow of 1.5/15.
Article Metrics:
Last update:
Last update: 2024-11-18 11:48:17
As an article writer, the author has the right to use their articles for various purposes, including use by institutions that employ authors or institutions that provide funding for research. Author rights are granted without special permission.
Author who publishes a paper at JKSA has the broad right to use their work for teaching and scientific purposes without the need to ask permission, including: used for (i) teaching in the author's class or institution, (ii) presentation at meetings or conferences and distributing copies to participants ; (iii) training conducted by the author or author's institution; (iv) distribution to colleagues for research use; (v) use in the compilation of subsequent authors' works; (vi) inclusion in a thesis or dissertation; (vi) reuse of part of the article in another work (with citation); (vii) preparation of derivative works (with citation); (viii) voluntary posting on open websites operated by authors or author institutions for scientific purposes (follow the CC BY-SA License).
Authors and readers can copy and redistribute material in any media or format, and mix, modify, and build material for any purpose but they must provide appropriate credit (provide article citation or content), providing links to the license, and indicate if there are changes.
The authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Kimia Sains dan Aplikasi (JKSA). Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations.
Reproduce any part of this journal, its storage in the database or its transmission by all forms or media is permitted does not need for written permission from JKSA. However, it should be cited as an honor in academic manners
JKSA and the Chemistry Department of Diponegoro University and the Editor make every effort to ensure that there are no data, opinions, or false or misleading statements published in JKSA. However, the content of the article is the sole and exclusive responsibility of each author.
The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form - Indonesian] [Copyright Transfer Form - English]. The copyright form should be signed originally and send to the Editor in the form of printed letters, scanned documents sent via email or fax.
Adi Darmawan, Ph.D (Editor in Chief)
Editor in chief of Jurnal Kimia Sains dan Aplikasi (JKSA)
Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University
Visitor: View My Stats
Jurnal Kimia Sains dan Aplikasi is indexed in:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
