1Department of Physics, Faculty of Mathematics and Natural Sciences, Sebelas Maret University, Jl. Ir. Sutami 36 A, Surakarta, 57126, Indonesia
2Department of Chemical Engineering, Faculty of Engineering, Sebelas Maret University, Jl. Ir. Sutami 36 A, Surakarta, 57126, Indonesia
3Department of Chemistry, Faculty of Mathematics and Natural Science, Sebelas Maret University, Jl. Ir. Sutami 36 A, Surakarta, 57126, Indonesia
BibTex Citation Data :
@article{JKSA49011, author = {Putri Lestari and Rhiska Aria Berliani and Erlangga Aria Pratama and Ridwan Assabila Al-Jannata and Desy Vita Pratiwi and Hendri Widiyandari}, title = {Extraction of Silica (SiO2) from Rare-Earth Metal Zircon (ZrSiO4) as Lithium-Ion Battery Anode Material}, journal = {Jurnal Kimia Sains dan Aplikasi}, volume = {26}, number = {3}, year = {2023}, keywords = {Li-ion Battery; SiO2; Rare-Earth Zircon; Anode material}, abstract = { Zircon is a rare metal natural mineral composed of zirconia and silica. The silica content in zircon can be used as anode material for lithium-ion batteries because of the low cost and high theoretical capacity. Silica is obtained from the extraction process of zircon with 5M NaOH solution with aging time variation to determine the silica surface area. The SiO 2 /C composite was obtained from the solid state reaction process of a mixture of silica and graphite. The silica results obtained were tested for characteristics using X-ray diffraction (XRD), Surface area analyzer (SAA), and Scanning electron microscopy/Energy dispersive x-ray (SEM/EDX). Test the battery performance to find the number of cycles, capacity, voltage, and battery current using Cyclic voltammetry (CV) and Continuous discharging current (CDC) tests. The highest silica yield and optimal surface area were obtained at 24 hours aging time variation of 8,721 m 2 /g with percentages of O 36.48% and Si 18.04%, and battery performance test with the highest capacity of 222.7 mAh/g on silica aging time variation 18 hours. }, issn = {2597-9914}, pages = {79--84} doi = {10.14710/jksa.26.3.79-84}, url = {https://ejournal.undip.ac.id/index.php/ksa/article/view/49011} }
Refworks Citation Data :
Zircon is a rare metal natural mineral composed of zirconia and silica. The silica content in zircon can be used as anode material for lithium-ion batteries because of the low cost and high theoretical capacity. Silica is obtained from the extraction process of zircon with 5M NaOH solution with aging time variation to determine the silica surface area. The SiO2/C composite was obtained from the solid state reaction process of a mixture of silica and graphite. The silica results obtained were tested for characteristics using X-ray diffraction (XRD), Surface area analyzer (SAA), and Scanning electron microscopy/Energy dispersive x-ray (SEM/EDX). Test the battery performance to find the number of cycles, capacity, voltage, and battery current using Cyclic voltammetry (CV) and Continuous discharging current (CDC) tests. The highest silica yield and optimal surface area were obtained at 24 hours aging time variation of 8,721 m2/g with percentages of O 36.48% and Si 18.04%, and battery performance test with the highest capacity of 222.7 mAh/g on silica aging time variation 18 hours.
Article Metrics:
Last update:
Last update: 2024-11-20 09:15:01
As an article writer, the author has the right to use their articles for various purposes, including use by institutions that employ authors or institutions that provide funding for research. Author rights are granted without special permission.
Author who publishes a paper at JKSA has the broad right to use their work for teaching and scientific purposes without the need to ask permission, including: used for (i) teaching in the author's class or institution, (ii) presentation at meetings or conferences and distributing copies to participants ; (iii) training conducted by the author or author's institution; (iv) distribution to colleagues for research use; (v) use in the compilation of subsequent authors' works; (vi) inclusion in a thesis or dissertation; (vi) reuse of part of the article in another work (with citation); (vii) preparation of derivative works (with citation); (viii) voluntary posting on open websites operated by authors or author institutions for scientific purposes (follow the CC BY-SA License).
Authors and readers can copy and redistribute material in any media or format, and mix, modify, and build material for any purpose but they must provide appropriate credit (provide article citation or content), providing links to the license, and indicate if there are changes.
The authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Kimia Sains dan Aplikasi (JKSA). Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations.
Reproduce any part of this journal, its storage in the database or its transmission by all forms or media is permitted does not need for written permission from JKSA. However, it should be cited as an honor in academic manners
JKSA and the Chemistry Department of Diponegoro University and the Editor make every effort to ensure that there are no data, opinions, or false or misleading statements published in JKSA. However, the content of the article is the sole and exclusive responsibility of each author.
The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form - Indonesian] [Copyright Transfer Form - English]. The copyright form should be signed originally and send to the Editor in the form of printed letters, scanned documents sent via email or fax.
Adi Darmawan, Ph.D (Editor in Chief)
Editor in chief of Jurnal Kimia Sains dan Aplikasi (JKSA)
Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University
Visitor: View My Stats
Jurnal Kimia Sains dan Aplikasi is indexed in:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.