Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University, Indonesia
BibTex Citation Data :
@article{JKSA30296, author = {Arnelli Arnelli and Rahmatul Fazira and Yayuk Astuti and Ahmad Suseno}, title = {Synthesis of Sodium Lauryl Sulfate (SLS) and Hexadecyltrimethylammonium Bromide (HDTMA-Br) Surfactant-Modified Activated Carbon as Adsorbent for Pb2+ and NO3-}, journal = {Jurnal Kimia Sains dan Aplikasi}, volume = {23}, number = {11}, year = {2020}, keywords = {Surfactant Modified Activated Carbon; Adsorption; adsorbate}, abstract = { The adsorption efficiency and selectivity of activated carbon as an adsorbent for ions can be improved. One way is to convert activated carbon into surfactant modified activated carbon (SMAC). The surfactants used in this study were the anionic surfactant Sodium Lauryl Sulfate (SLS) and the cationic surfactant hexadecyltrimethylammonium bromide (HDTMA-Br). This research aims to synthesize SMAC to obtain a material with a surface charge and absorb ions better than activated carbon. This research consisted of four stages. The first step was the carbonization of rice husks using a pyrolysis reactor at 400°C for 1 hour. The second stage was carbon activation using 30% ZnCl 2 and microwave radiation for 5 minutes and 400 W. The third stage was the modification of activated carbon and characterization by FTIR, SEM, SAA. The fourth stage was the adsorption of Pb cations and nitrate anions by carbon, activated carbon, and SMAC. Several variables were applied, such as the type of surfactant, time, and method of modification. There are three ways of modification: (1) method A, in which activated carbon is brought into contact with SLS then HDTMA-Br. (2) Method B in which activated carbon was contacted with HDTMA-Br then SLS. (3) Method C in which activated carbon was brought into contact with SLS together with HDTMA-Br. All variables were investigated. The results showed that the optimum time for making SMAC for both surfactants was 4 hours, the optimum concentrations of SLS and HDTMA-Br were 60 and 300 ppm, respectively. SMAC made by the C method was the most effective at adsorbing Pb 2+ and NO 3 - with adsorption capacities of 1.376 and 0.896 mg/g, respectively. The success of SMAC synthesis was evidenced by the S=O and (CH 3 ) 3 N + groups in the FTIR spectra. The SMAC surface area is smaller than activated carbon, 14.472 m 2 /g, but the surface morphology is smoother and more homogeneous. }, issn = {2597-9914}, pages = {396--402} doi = {10.14710/jksa.23.11.396-402}, url = {https://ejournal.undip.ac.id/index.php/ksa/article/view/30296} }
Refworks Citation Data :
The adsorption efficiency and selectivity of activated carbon as an adsorbent for ions can be improved. One way is to convert activated carbon into surfactant modified activated carbon (SMAC). The surfactants used in this study were the anionic surfactant Sodium Lauryl Sulfate (SLS) and the cationic surfactant hexadecyltrimethylammonium bromide (HDTMA-Br). This research aims to synthesize SMAC to obtain a material with a surface charge and absorb ions better than activated carbon. This research consisted of four stages. The first step was the carbonization of rice husks using a pyrolysis reactor at 400°C for 1 hour. The second stage was carbon activation using 30% ZnCl2 and microwave radiation for 5 minutes and 400 W. The third stage was the modification of activated carbon and characterization by FTIR, SEM, SAA. The fourth stage was the adsorption of Pb cations and nitrate anions by carbon, activated carbon, and SMAC. Several variables were applied, such as the type of surfactant, time, and method of modification. There are three ways of modification: (1) method A, in which activated carbon is brought into contact with SLS then HDTMA-Br. (2) Method B in which activated carbon was contacted with HDTMA-Br then SLS. (3) Method C in which activated carbon was brought into contact with SLS together with HDTMA-Br. All variables were investigated. The results showed that the optimum time for making SMAC for both surfactants was 4 hours, the optimum concentrations of SLS and HDTMA-Br were 60 and 300 ppm, respectively. SMAC made by the C method was the most effective at adsorbing Pb2+ and NO3- with adsorption capacities of 1.376 and 0.896 mg/g, respectively. The success of SMAC synthesis was evidenced by the S=O and (CH3)3N+ groups in the FTIR spectra. The SMAC surface area is smaller than activated carbon, 14.472 m2/g, but the surface morphology is smoother and more homogeneous.
Article Metrics:
Last update:
Synthesis of Surfactant-Modified Activated Carbon (SMAC) Above Critical Micelle Concentration as Cr(VI) Ion Adsorbent
Synthesis, performance, and mechanisms of strontium ferrite-incorporated zeolite imidazole framework (ZIF-8) for the simultaneous removal of Pb(II) and tetracycline
Last update: 2024-11-24 13:26:24
As an article writer, the author has the right to use their articles for various purposes, including use by institutions that employ authors or institutions that provide funding for research. Author rights are granted without special permission.
Author who publishes a paper at JKSA has the broad right to use their work for teaching and scientific purposes without the need to ask permission, including: used for (i) teaching in the author's class or institution, (ii) presentation at meetings or conferences and distributing copies to participants ; (iii) training conducted by the author or author's institution; (iv) distribution to colleagues for research use; (v) use in the compilation of subsequent authors' works; (vi) inclusion in a thesis or dissertation; (vi) reuse of part of the article in another work (with citation); (vii) preparation of derivative works (with citation); (viii) voluntary posting on open websites operated by authors or author institutions for scientific purposes (follow the CC BY-SA License).
Authors and readers can copy and redistribute material in any media or format, and mix, modify, and build material for any purpose but they must provide appropriate credit (provide article citation or content), providing links to the license, and indicate if there are changes.
The authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Kimia Sains dan Aplikasi (JKSA). Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations.
Reproduce any part of this journal, its storage in the database or its transmission by all forms or media is permitted does not need for written permission from JKSA. However, it should be cited as an honor in academic manners
JKSA and the Chemistry Department of Diponegoro University and the Editor make every effort to ensure that there are no data, opinions, or false or misleading statements published in JKSA. However, the content of the article is the sole and exclusive responsibility of each author.
The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form - Indonesian] [Copyright Transfer Form - English]. The copyright form should be signed originally and send to the Editor in the form of printed letters, scanned documents sent via email or fax.
Adi Darmawan, Ph.D (Editor in Chief)
Editor in chief of Jurnal Kimia Sains dan Aplikasi (JKSA)
Chemistry Department, Faculty of Sciences and Mathematics, Diponegoro University
Visitor: View My Stats
Jurnal Kimia Sains dan Aplikasi is indexed in:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.